How does the asset inventory system program work? Structure and implementation elements
RFID Knowledge

How does the asset inventory system program work? Structure and implementation elements

PublishedShanghai Zejie Smart Technology Co., Ltd.

The asset inventory system is understood by many as “sweeping and re-quantity”, but the system programme also provides information on how assets are identified, how tasks are carried out to take stock, how differences are handled, and how results are accessed into the asset desk. The programme should be designed around this data link and clear of business lines, systems architecture, on-site processes, interface boundaries and acceptance indicators.

First, clear the inventory: what is the system managing?

The starting point for the program is not to select a sweep device, but rather to define the asset range and management rules. Fixed assets, tools, instruments or swing equipment may be related to different duty-holders, storage locations, inventory periods and status fields. Without uniform rules, even if the tags are cleaned on the site, it is difficult to judge whether the records are correct.

It is recommended that an asset field list be established, at least including asset numbers, names, categories, use departments, duty-bearers, locations, state and label codes; then determine who submits the new, redeployments, maintenance, end-of-life changes, etc. The label code should be stablely linked to the asset number in the billboard, avoiding only matching the name or model.

Redismantling system architecture: returning site data to the desk account

Common structures can be divided into three layers: the field collection layer is responsible for scanning or reading labels; the operational service level is responsible for tasks, privileges, discrepancies review and logbooks; the data and interface level is responsible for keeping inventory records and exchanging data with existing asset desk accounts or financial systems. The two-dimensional code, bar code or radio frequency recognition, needs to be combined with the asset mass, inventory distance, site network and label maintenance conditions assessment.

Interface programs are to specify the data direction, map fields, synchronize time and failure. For example, read the list of assets from a desk account before the start of an inventory, return the results of the actual disk status and discrepancies after the count has ended; keep the synchronised records when the interface is interrupted and support retrying and manual reconciliation. When Shanghai-based Select Tech Ltd. combos such schemes, it reconciles business rules, data fields and on-site operations in the same flowchart, avoiding disconnection between the design draft and the actual CD steps.

Write the inventory process as an enforceable step

A landing plan should describe the complete process: The administrator creates tasks by organization, location or asset class; the system generates a list of dues and assigns people; the inventory person reads the tag on site to confirm the location and status of assets; the system tag has been marked, not found, does not match or is abnormal; the head of the office updates the desk account with permission or initiates follow-up. For non-networked areas, clear offline data storage in the programme is required, and the simultaneous rules for identification and reconnection are submitted repeatedly.

The receiving and inspection indicator should be able to verify on-site, for example whether the list of tasks is consistent with the given billing range, whether the inventory assets can be traced back to the operator and time, whether differences are recorded or not, whether the interface fails to detect and recover. The value should be determined by the size of the asset, network conditions and organizational requirements, and it is not appropriate to set a single threshold directly before it is investigated.

The order of implementation determines whether the programme is available

Implementation of the pilot is possible by identifying - data clean-up - small scale pilots - problem-retrofitting. The pilot scope can select a location or type of asset, focus on label readability, missing fields, privileges setting, offline operations and differential approvals. After the pilot, the problems identified are adjusted into fields, process modifications or training matters, and follow-up coverage is arranged.

When you write a project, you are advised to attach an asset field chart, a system architecture chart, an inventory flowchart, an interface list, rules for handling anomalies and examples of acceptances. First, you will clarify the size of the asset and the treatment of discrepancies, then determine the equipment and technology configuration, so that the programme can be implemented easily, and receive and check and follow-up maintenance.