How do you choose the RFID fixed asset label?
When you take a stock of a fixed asset, the label is drawn up and then it is not read in the metal cabinet, often not because the equipment list is wrong, but because the label envelope does not match the site. The type is selected to confirm the material, location, reading/writing distance and environment of the asset, and then determine how the label structure and mode are fixed; the actual asset is tested for reading and writing before going online.
It's not read on the spot.
When a device is labeled, hand-held readers come close to but do not respond in a stable way, often because of interference with metal surfaces, labels are masked by liquid or other materials, inappropriate placements and failure to match the reader's parameters. RFID identifies tags through radio signals, different frequency bands and distance for label design, which vary from environment to context.
Before selecting the type, assets can be recorded in several categories: metal equipment, plastic or wood equipment, liquid containers, constantly moving devices, and assets that are permanently in an outdoor or high temperature environment. Each category is marked with a potential label, whether it will collide or friction, by means of routine cleaning. Shanghai-based Selectory Technologies Ltd. will first match these site conditions to the action taken on the inventory, avoiding choosing only by label size or unit price.
Tags are always dropped or damaged, and the seal is selected according to the installation conditions
Covers are the protection structure outside the label chips and antennas. Ordinary non-dry glue tags allow for flat surfaces, suitable for less worn, environmentally dry assets; hard labels are more adapted to repeated touch or screws, with a fixed set of scenes; when attached to metal surfaces, the label structure that is clearly applicable to metals should be chosen instead of simply sticking up the general label.
Select the material to check several conditions: whether the surface is flat or curved, whether there is oil stain, dust or condensed water, whether the asset will experience cleaning, sunscreening or temperature changes. The paste should be preceded by cleaning and drying of the surface, pressing the label as required by the product, avoiding being attached to a seam, sharp edge, active parts and frequent friction. If you use a bandage or screw to fix it, make sure that it does not block the label antenna or affect the normal use of the asset.
Inventory distance unstable and test with actual assets
The distance to read in the label label is not equal to the distance available on site. Reader antennas, label direction, surrounding metal structure, movement of people and asset placing density affect identification results. Tests should use the planned input reading and labels, covering typical assets and their most unfavourable position, and multiple readings from physical inventory distances; records fail to read, error of time to read, and readjustment of label positions or reader parameters.
For example, metal equipment that is released in a warehouse may block signals from each other. It can be tested at different locations of the device's shell, comparing label direction with reading and writing performance; if assets are moved frequently, check whether the label is easily moved, stacked or scrapped during cleaning. The test record should include asset type, label location, read distance, equipment parameters and results, to facilitate subsequent review, not just leave a conclusion that " readable" or "not readable" is possible.
The tags are on. We still need to put the code and maintenance in the code.
The tags should be consistent with the asset billing. Coding rules need to facilitate on-site identification and system maintenance, and data for labeling must be consistent with actual management processes; if a label is to be changed, the asset number should be checked against the desk record so that old labels are not still readable and old information can be stored together.
After you are put into service, you can check the labels for looseness at the first count, for maintenance or for transfer of assets. You find anomalies, record asset numbers, original label status and change in time. The key to the selection is not just a single view of the encapsulation thickness or reading distance, but rather that the labels work in a corresponding material, environment and management process; sort them, then paste them, then verify them, usually more secure than returning after bulk procurement.

Ms. Lei
Mr. Pang