How do medical RFID asset counts work? High-value consumables and equipment retroactive.
Industry News

How do medical RFID asset counts work? High-value consumables and equipment retroactive.

PublishedShanghai Zejie Smart Technology Co., Ltd.

Many people think that the medical RFID count is "an electronic tag for the device, and then a sweeper." And it's actually going to be hard to know, but not the hardware, but whether process retrofits and data can be used. The RFID is just an entry, in short, the back-up scrutinizing logic of the consumption, the accounting mechanism, the data flow that connects with HIS/ERP, is where the project is successful or unsuccessful.

Why "label" is not enough?

Many people who first come to the medical RFID project think, "Isn't that a bar code instead of an electronic label?" This idea is where it's most easily pedaled.

In the medical scene, in particular, high-value materials (such as bone implants, intervention catheters, and a single price for pacemakers, which require a separate charge), management requirements are completely different from those of common low-value consumables. At the regulatory level, the Management of Medical Waste Materials in Health Institutions (Preliminary) issued by the National Commission on Health Care in 2019 explicitly requires the establishment of traceability mechanisms; following the reform of the DRG/DIP (paying for disease diagnosis/disease fractional value), high-value materials are being converted from "hospital fees to hospital advances" to "medical advances, after medical settlements". The accuracy of data on the development of waste materials is required to be significantly improved.

This is the core issue that RFID will address: each high value material can be automatically identified and recorded in the "inpatient-in-house-column-scientific-patient-to-cure" chain. The bar code also recognizes, but it needs to be scanned one by one, which is inefficient and easy to miss; RFID can read in bulk without opening the packaging, and dozens of items are over in a second.

There's a good tag selection.

High-value materials are packaged in very different forms, with metal packaging, liquid packaging, closed metal boxes, etc. The usual HF (HF, 13.56 MHz) is suitable for close and precise identification, the UHF (UHF, 860-960 MHz) is suitable for bulk count but less resistant to metals. For metal devices, it is often necessary to add metal tags or adjust antenna layouts.

Full link of high-value consumables

A back-to-back system covering at least five nodes.

Library:When the supplier delivers the RFID portal or hand-held end-volume access to the material consumption information corresponding to the purchase order, automatically checking key fields such as quantity, lot number, validity period, date of sterilization and so forth, and including in the hospital material management system.

Library storage:The RFID antenna is built in a shelf or smart cabinet, each access is automatically recorded and inventory data is updated in real time to avoid discrepancies such as "100 on the account and 80 on the shelf".

SectionThe nurse station or operating room receives the consumables through a smart cabinet, and the system automatically deducts the inventory and links it to specific recipients and time of use.

Patients use:Pre-surgery scanning of the wristband of a patient with the label of the material, and binding the "depletion-patient-surgery" relationship. This step is at the core of the hindsight and the basis for the settlement of the DRG/DIP and subsequent bad events.

Settlement and retroactive:The data on the used materials are automatically synchronized to the GIS and the health-care settlement system, leaving a trail of traces.

Throughout the chain, every step of data collection cannot be manually recorded, or the tracer chain is broken. The value of RFID is to make "people remember" into "system remember."

Implementation path for equipment asset counts

The inventory logic of medical equipment (CT, MRI, ultrasound, custodians, etc.) is simpler than that of the material used, but the work is not small.

The first step is...Create a table of equipment. We usually do a full inventory of each device, and we use the name, model, serial number, date of purchase, original value, use of the unit, current status (in use/inactive/to be scrap) to enter the system, while RFID labeling each device. The label type depends on the equipment's surface material, and metal case needs anti-metallic tags or adhesion positions to avoid the metal area.

Step two is...Deployment of Read PointLarge hospital equipment is spread out across different buildings, different floors, and it's common practice to have RFID channels or fixed type readers in front of the office, which keeps records for every move across the area. The mobile count moves around the room with a handheld terminal, and can complete an inventory of all the equipment in one half hour.

Step three is...Data Intersect. The inventory data is to be linked to the hospital fixed asset system, the financial system and automatically generate inventory reports and depreciation of assets.

For projects like these, we typically start with a pilot in one or two departments. We verify tag placement, read range, and signal interference before rolling out across the hospital. A full rollout straight away can easily uncover unexpected dead zones in individual departments.

The data doesn't work. It's all white in front.

The hardware input for the RFID inventory is not low, with a medium-sized hospital deploying hundreds of thousands to millions. If the data collected are just lying in the system and nobody looks at it, the project can almost be judged to have failed.

There are at least three things to really use.

The first is to connect with the existing system.The data collected by RFID is not isolated, but can be accessed into the HIS, material management systems, fixed asset systems, and create a unified data view. The experience of Shanghai-based Sieger Technologies in some hospitals is that they first harmonize data formats with intermediates (the software layers from and to different systems), then distribute them to different systems according to business rules, avoiding reconnection between each system.

Second, the key indicators are visualized.For example, the "day stock turnover" of high-value consumables, the "near-acting early warning number", the "top10" for section, and the "fun rate" for equipment, the "failure interval" -- are to be seen in the management cockpit.

Third is the unusual early warning mechanism.For example, a batch number is called back and the system can immediately locate all patients who have used it; an equipment that has remained unmoved for long periods may be idle or removed from the hospital, and the system must be automatically alerted.

Several easy-to-penetrate pits during the implementation process

The cost of process retrofitting is underestimated.The RFID project is a process retrofit project on the face of IT. The original manual receipt, inventory and other items are to be redesigned into system-driven processes or staff will find various reasons for continuing with the old approach.

The position of the label paste and the distance from which it is read require repeated testing.The same label varies widely in terms of the distance from which it is readable on different materials, and the metal surface may have dropped from 3 to less than 1 metre. One of our projects, a tag position test alone, took almost two weeks.

Data security and privacy.The RFID label itself does not contain information on patients, but when the data are traced back to the patient, access rights and operational logs must be marked in order to meet the requirements of the Personal Information Protection Act and the safety of medical data.

Budget allocation.The input of hardware labels and readers is often overestimated, while the inputs of intermediates, system integration, process retrofitting are easily underestimated, which is the dominant part.

Proposals for action

If you are evaluating or initiating the medical RFID project, it is recommended that it be carried forward in this order.

First, we'll do a process comb and need confirmation, and think clearly about what specific problems are to be solved through RFID, rather than start with the hardware list. The clear question is whether high-value consumables are to be addressed, or whether they are both.

Pilot in one or two representative departments. Test the full workflow from tagging through collection, integration, and day-to-day use, then expand once feasibility is confirmed.

Focus on data application planning, using data when project items are set up, where and who sees it, or the hardware becomes a setup.

Select the person who has medical experience. The difficulty of medical RFID is not in technical parameters, but in understanding hospital processes. Professionals can design processes, labels, system interfaces, and provide tailored solutions for the various aspects of transport training, with less deviant paths.

The ultimate decision on the value of the RFID project is not how many labels were put, but how many data were actually used in day-to-day management. This is clear from the first day of the project.