What is the application of RFID asset tracking management?
RFID Knowledge

What is the application of RFID asset tracking management?

PublishedShanghai Zejie Smart Technology Co., Ltd.

The core of RFID asset tracking is to place an electronic label (a small chip that communicates by radio) on each asset, automatically captures the location and status with a reader, synchronizes data in real time into back-office systems, and eventually creates a full life cycle file in ERP or MES. The key to this whole set of options is whether the tag, the readers, the antenna, the middle and the operational system are working together.

Element 1: RFID system consists of four pieces of label, reader, antenna, middle

First.TagIt has a chip and an antenna inside, which is empty, source-oriented, and half-source three. The passive labels send electric magnetic waves that are powered at low cost, small size, long life, suitable for posting on tools, archives, trays; the source tags with their own batteries, capable of active signaling, reading distances of up to several dozen metres, more for large equipment, vehicles; and the semi-sleeping between them, normal sleep, activated by the reader, and sending signals, balancing distance with effort.

Besides,Reader. Fixed-readers are usually installed at the warehouse entrance/entry, in line or door-blocking units, and are designed to form an identification area, and assets are automatically registered as soon as they pass; handheld readers are shaped like thicker PADs, which can be read in bulk when you take a lap while you check the points; and door-readers are a combination of fixed readers with two vertical antennas that are used specifically to identify the whole-to-to-load goods entering and leaving the warehouse.

AntennaThe scope and direction of the reader is determined. The same reader changes a direction antenna from 3 m to 10 m; the full-direction antenna is converted into a spherical area, but the single-direction distance is reduced.

MiddleIt is a "translator" who connects to the reader and business system, filters duplicate data, converts label data from different formats into fields that the business system can recognize, and manages multiple readers' queries and conflicts.

Element 2: Five most common applications scenarios

Warehousing logistics. When the tray, box, turn basket is labelled, manual scans are no longer required for entering, leaving or moving libraries, and the speed and accuracy of identification can be significantly increased.

IT assetsServers, notebooks, printers, etc. are scattered across different sectors, and it takes a few days to get a manual inventory. Using RFID handheld machines, you can clear one floor and a half hour.

Medical equipment. High-value equipment, such as respirators, monitors and pumps, often flows between different disease areas, and the labels, with positioning features, allow the nurse station to see which floor and which room the equipment is located directly.

Production tools and mouldsSwords, clamps, pressure moulds are of high value and borrowed frequently. Each receipt and return is recorded after a mark has been posted, which effectively reduces loss and delays in repayment.

Archives and books. The RFID label is read in bulk without turning, and the count is several steps above the traditional bar code.

Point 3: Standard process of full retroactive

A complete backtracking programme, usually divided into six steps according to the life cycle of the asset:

  1. Setup Paste. Each asset is archived in the system, with a unique code (the common EPC code within the industry, usually 64 or 96 bits) and printed or written to label.
  2. Registration of the library. When assets enter a warehouse or workshop, the fixed reader automatically identifies and writes into time, location, operator.
  3. Move & & Access. When assets flow across the region, they remain in front of a door or fixed reader for seconds and the system automatically updates the belonger and location.
  4. Periodic count. The manual reader follows the route, dozens of assets are read out in seconds and discrepancies automatically generate an inventory report.
  5. Maintenance. The file automatically continues on a time line each time the maintenance code is entered and included in the description of the failure, replacement of spare parts, maintenance staff and costs.
  6. Write-off of write-offs. When assets reach useful life or damage cannot be repaired, the write-off is completed by scanning the tags and the system maintains a full flow record for audit purposes.

And we found that the most easily stuck in this kind of project in six steps is not hardware, but step two and step six -- many companies have asset cards in their ERPs, but RFID can't get in or go out of it, but it doesn't fit into the field, and then it turns into two sets.

Point 4: Several pits that you'll encounter when you land.

Metal and liquid interference. The surface of the metal reflects electromagnetic waves, and pure water absorbs signals, and is largely unreadable by a normal label on the metal shell. This requires anti-metallic labels, which have an additional layer of suction material inside, that can allow the electromagnetic wave to bypass the reflection of the metal.

Label Costs. A passive tag costs a few hundredths to a few tenths of a yuan, but for around 100,000 assets, the total can be substantial once printers, encoders, and labor are included. Calculate the all-in cost per asset rather than looking only at the tag price.

Multisystem access.. The RFID data usually go to the middle, then send it to ERP, MES, WMS or self-study platforms. The fields of different systems are named, time format, and the only marking rules are different, and need to be mapped in the middle layer, otherwise the data cannot be matched.

Privacy and security. The EPC code stored by the label itself does not contain sensitive information, but the location and operation records collected by the reader relate to human behaviour, which requires encryption for transmission and storage, and avoids interception or tampering with an intermediary.

Element 5: The parameters to be highlighted for the check-up at the selection

Finally, to conclude: RFID AssetTrack is not a simple thing to buy several readers and labels alone, it is a project that needs to be designed from the business scene, with hardware selection, data flow, system integration, process specifications. Piloting one or two high-value scenarios, running data and processes, then scaling up to full-volume assets, is a more secure approach. Shanghai's quick-tangled approach is driven by this rhythm in many industries, and interested peers can look at this as a small-scale validation.