What are the capabilities of RFID smart asset management? Platform function analysis
RFID Knowledge

What are the capabilities of RFID smart asset management? Platform function analysis

PublishedShanghai Zejie Smart Technology Co., Ltd.

The person who manages the asset is often stuck on a similar issue: the account and the physical, the inventory is to mobilize several departments, the assets are undetermined and the problem is not recognized. The answer is how much can RFID smart asset management do? It's direct -- it links "the books, things, people" into a data chain, and leaves a mark on the entire life of the asset from the bank to its end-of-life status. In terms of actual projects, the efficiency of the count is several times more than manual, with the reconciliation rate being raised from 80% to over 99%, which is the most obvious value, and the core criterion for determining whether to go up or not.

Core competencies: RFID What can smart asset management do?

Using RFID for asset management is not as simple as replacing a normal bar code with an electronic label. Its ability can be summarized in four things, each of which corresponds to the pain that was hard to resolve in the past.

1. Batch identification, without a case-by-case scan.The traditional bar code is a piece of a scrutinizing gun, and the RFID (radio frequency recognition, simply radio-wave access to information in electronic labels) can read hundreds of labels at a time, with much less direction and angle. A medium-sized machine-processed plant, which was closed for two days at the end of the year, could complete the initial disk of the entire workshop equipment in two hours after reading on the RFID channel.

2. Real-time positioning and status tracking.When you label an asset electronically, the platform keeps track of the location and movement of the asset, along with the reader and positioning antenna. The device is removed from the workshop, the tool vehicle is pushed out, the notebook is taken out of the office area, the system automatically records, which leaves a mark on the event, not later.

3. A life-cycle archive.The data for each node are automatically included in the same file.

4. Abnormal automatic warning.The system triggers a rule-based reminder that no one is to be targeted. This item is particularly useful for the IT sector and audit services of enterprises.

Platform functional dismantling: what is normally the composition of a RFID asset management platform

The platform is not a single software, but a combination of "gathering layers -- data layers -- application layers." Below is a layered cleavage that makes it clear what each level does to facilitate the evaluation of the plant's programme.

Collection layer: Hardware is the basis.These include electronic labels (on assets, source-free, non-source), readers (handheld, fixed channel, desktop haircard), antennas, network devices. Hardware selection directly affects recognition and error rates, which are the most problematic links in the project.

Data Layer: Converts the original reading to available information.RFID Readers output raw radio frequency signals and tag ID, the platform needs to reload, filter, connect, merge multiple read events into a valid operation, and bind labels and asset numbers. Most users are blind, but it determines data accuracy.

Application level: The daily function is here.

Compatibility: deciding if you can land.The interface maturity, field mapping, and historical data migration programmes are the focus of the assessment.

Applicable scenario: which asset types and management needs fit on RFID

The following scenarios are the highest input output for RFID, which is not a panacea.

1. High-value, vulnerable to loss of equipment.For example, detection devices, medical equipment, IT notebooks, precision molds, single-format items that are high value but scattered across multiple workshops or office areas and cannot be handled by manual billboards. These types of assets are often covered by the RFID system, which recovers or avoids loss of asset values in a year.

2. Large quantities and lots of consumables or accessories.The spare parts in the warehouse, the knife-stabbing kit in the tool room, are of low value but very small numbers, and take stock of a huge amount. The ability to identify RFID's batch is most evident here.

3. Industry requiring compliance audits.The RFID’s ability to leave a mark directly reduces the pressure on the audit.

4. Frequent transfers, loans and sharing of assets.For example, in-group testing equipment sharing ponds, inter-sectoral borrowing instruments and externally leased equipment, RFID automatic tracking can significantly reduce skin-thragging.

In turn, the advantage of RFID is not obvious in a scenario where assets are small, long-term fixed and no compliance audit pressure exists. The use of normal bar code and billing software is sufficient to avoid RFID.

The pits that are common to land: the selected and the real easy-to-peer problems in implementation

The projects that have been contacted over the past few years are re-established, and several problems arise with high frequency and know in advance that less has to be done.

1. Think of RFID as "a sticker is over".The electronic label itself is a carrier, and what really determines the effect is the project of the reader deployment, the antenna angle, the label selection (metal surfaces are marked with anti-metallic labels, liquid environment with special tags). Some items are labelled, read and write, but only 60% recognition, and then manually refilled, and the problem arises in this layer.

2. Neglect and interface with existing systems.Some manufacturers show only their own platforms, and they don't see how the data enter ERP or financial systems. The results are manually synchronized with the asset desk account, but there is a process. Selecting the interface list, field mapping, historical data migration program is clear, and if necessary, requests live demonstrations.

3. One-time labelling of all assets.Roll large projects out in stages. First prove the workflow with one category of high-value assets, then expand to the second and third categories. In practice, Shanghai Zejie usually advises customers to pilot for three to six months and measure data accuracy, counting efficiency, and user acceptance before deciding on a full rollout.

4. Underestimating the complexity of data governance.The RFID system runs with a large amount of event data, which requires continuous maintenance of tags and asset matching. Assets are scrapped, new, transferred, label status is updated simultaneously, otherwise the data in the platform will become dirty. This part of the work is written into daily workflow processes, not just by the wave on the project line.

5. Neglect of training of personnel in use.The handheld, how the anomaly is handled and how the inventory mission is launched are all in place. Some project techniques are fine, but the first line of action is too much to use, not in private, and the system is set up.

The core value of RFID smart asset management is to move the "accounts, things" from being people-to-system, so that every asset can be traced, traceable, statistical. It's not a substitute for all management actions, but to connect those repetitive, inefficient, fault-prone jobs, and make people judge, make decisions and make exceptions.

To decide whether to deploy, ask three questions: Has inventory counting become a burden? Can you quantify the annual cost of mismatches? Can your existing system provide accurate asset status data? A 'yes' to at least one leaves scope for RFID asset management to add value. Pilot with one asset class, then assess record-to-asset agreement, counting time, and number of exceptions after three to six months before expanding.