What is the role of fixed asset location management?
RFID Knowledge

What is the role of fixed asset location management?

PublishedShanghai Zejie Smart Technology Co., Ltd.

2 a.m. and the laptop in the warehouse

Last winter, the night supervisor at an electronics contract manufacturer spent 40 minutes searching a warehouse with a flashlight for a test laptop someone had borrowed. The records showed it was in stock, but no one knew which shelf it was on, who had taken it, or when it would come back. It still hadn't turned up at the next shift, and production line testing had to wait two hours.

This is not just happening at that plant. As long as there are more fixed assets, the workshops are scattered, people move more frequently, finding assets and preventing loss becomes a problem for both sides. The problem with fixed asset location management is one of finding assets, searching fast; and one of getting assets out of the bank, entering the vault, running in the books, losing them, never losing them.

Why would "assets" become a physical job?

Many companies have been in the fixed asset management system for years, and every device on the books has a number, a beneficiary, a department, it looks complete. But once you really look for something like a oscillator, a forklift, a set of molds, the system can always tell you "registered under a certain name," as to which job this person keeps, whether it is returned or not.

The problem is in three places:

The three problems are collating, and the fixed asset management becomes a "fun-de-conformity" long-term saw. The more beautiful the bookbook numbers are, the more chaotic it is in the actual warehouse.

What exactly does L.A. do?

Fixed asset location management, in short, gives each asset a "talk" sign that tells you where it is, who uses it, and how it is. The mechanism usually contains three layers of content.

First tier: identification

Each fixed asset is bound to a unique code, which corresponds to its "identity card." It can be a two-dimensional code on the device or an RFID electronic label (an electronic label that automatically identifies by radio frequency signals, placed on metal or plastic surfaces, read a few metres away). The code contains the asset number, name, specification, date of purchase, basic information that can be traced, scans saved, thick billboards.

Second floor: Location perception

This is the most different place to locate and keep a traditional table. The labels on assets continue to report location information -- inside the house with Bluetooth beacons, UWB (superbroadband positioning, a non-wire ranger technology that can be precise enough to reach centimetres) or Wi-Fi fingerprinting; moving outside or across the factory area, going by GPS or BeiD. Location data are updated every few minutes to hours, written into the system.

The immediate benefit of this is that when you look for assets, open your phone or computer, enter a number or search "shower", the system gives you a map, indicating which workshop it is in, which line it is being scanned, where it was last scanned, and within a few metres.

Third level: flow and status records

Every time you borrow, return, move, repair, and end of life, you create a nodal record. The records contain time, people, new location, change cause. The flow nodes accumulate to a certain number, they form a complete asset trail, who passes through, where, and for all that.

Search efficiency: from "Face for half an hour" to "Look at three seconds."

The change in effect is visual. We've been to a client who does the precision machine, and they have over 1,200 pieces of work-packing, utensils, knives, which used to spend more than 30 hours a week on "Seek tools." After taking up the positioning system, the changes are reflected in several specific figures:

The impact of this efficiency increase on the first line is straightforward — employees need not spend any more time running around the factory, supervisors do not have to place people "search" and you can put your energy back into your job.

Loss prevention: how the discrepancies were blocked

Finding it is only the first step, and much harder "not to lose." The value of positioning management against loss is mainly three-point.

Unauthorized real-time alerts

Once assets cross the pre-set geographical boundary, such as being taken out of the factory gate and moved into unauthorized workshops, the system immediately pushes the managers. It works with door closures and locator tags to stop people before they leave the plant. This is particularly true for laptop computers, measuring devices, which are very valuable, small size, easy to carry assets.

Long-term inactive automatic warning

An asset is not changed for more than 30 days, and no records are used, the system will be marked as "suspected idle." The administrator can clean up idle assets on a regular basis, the transfer of the transfer, the end-of-life, and avoid "sleeping" in the corner until it's completely dead.

Fluid marks to reduce human losses

Every hand has a record of the assets, who borrowed them, when they were paid, whether they were returned in good time. There's still paper and black, and nobody is ashamed to be vague. One client count shows three sets of molds missing, one look at the location track, one turns out that it was a cross-workshop debugging that failed to return them in time, and then you retake the original by the record, and you revise the application process.

What do you have to watch when you land?

The positioning system is not fitted to run smoothly, and several common pits are worth avoiding in advance.

First, the labels are selected to fit the scene.In workshops with large metal surfaces (e.g. machine processing, hardware), normal RFID label signals are blocked and need to be resistant; high temperature environments (e.g. foundry) select high temperature tags; often unstacking removal tools, and recommend reusable labels instead of one-time stickers.

Second, no precision in positioning.The workshop is looking for equipment to be able to get the floor + area, which is basically enough, without having to position UWB in centimetres -- costs are going to increase several times, but the returns are not necessarily up to date. Only when assets are of particularly high value or involve dangerous materials control are high-precision options considered.

Third, the process has to be changed.Technology provides the framework, but workflows make the system useful. Without clear rules on how checkout and return are scanned, who approves them, and how overdue assets are handled, the system will sit idle. Before go-live, map out the workflows for three to five common scenarios, make sure they work smoothly, and then roll them out in stages.

In this type of project, Shanghai's best way to do this is to first get a look at the current status of customer management -- total assets, distribution of items, workshop layout, high-frequency flow paths -- and then push technical programs and labels. We find that we have solid pre-diagnostics, and we'll have half the skins that are encountered when we go up the back line.

From "the account" to "the find."

The goal of fixed asset management is two things: to keep the books and to keep the assets safe.

If you're going to move this forward, you can start with three steps: first, pick out the assets that are "unable" on the books, see if they lack location information or flow records; then you can pilot a high-value or high-frequency fluid (e.g. laptops, quantum, molds); run a full scene; and finally decide whether to push the whole plant or go in stages based on the results of the pilot.

The precision of asset management often determines how much time a factory spends and how much responsibility it has to spend in busy hours. The sooner this happens, the more difference is felt.