What is the use of RFID asset tracking?
Industry News

What is the use of RFID asset tracking?

PublishedShanghai Zejie Smart Technology Co., Ltd.

The core value of RFID asset tracking is "Auto-Identification+Clear." After the assets are labelled electronically, fixed or handheld devices can identify hundreds of items in lots within seconds, record each access to and from the library, place transfer and intersection, and save manual scanning and paper documents.

Point 1: First look at the four most common types of RFID in asset tracking.

The types of assets of interest to different industries vary considerably, but the bottom line logic is consistent: each item has the only identity that can be automatically identified.

Manufacturing: moulds, tools, semi-finished

A set of precision molds in the machine processing workshop, worth tens to hundreds of thousands of dollars, was used to be managed by manual registration and boarding, loaned back often not matched. With a metal-resistant RFID label (a metal-specific label that is designed for surfaces, which does not have metal shield signals), workers can borrow it back once in front of the tool cabinet, and the workshop manager can see at any time in the system where each set of models is currently on the floor, who is using it, how long it took.

Medical: high-value consumables and kit

The surgical kit, bone material, heart support, high value items, which are highly retroactive to safety. Each device is labelled and tagged from the disinfection supply room, used in the operating room, after the operation is recovered, and the entire course of the procedure is automatically recorded through a door or handheld machine, and the hospital has a clear idea of the number of times each device is used, the time of its sterilization and current movement, and meets the requirement that supervision can trace the whole life cycle.

Logistics and storage: pallets, containers, containers

Warehouses circulate large numbers of plastic pallets and reusable totes. With barcodes, workers scan the front of each container individually. An RFID portal can read an entire stack of dozens of totes at once, cutting inbound counts from half a day for two or three people to under an hour. In cold-chain transport, RFID tags paired with temperature sensors can record each shipment item's temperature profile.

Archives, books and IT equipment

Archives and libraries can tag each file or book and use RFID gates for automated checkout and return, theft prevention, and location tracking. After a company fitted flexible RFID tags to IT assets such as laptops, servers, and lab instruments, its annual stocktake fell from three days to half a day, and asset losses dropped noticeably.

Element 2: The core architecture of the drift-trace programme is four-tiered

A landing-oriented RFID retroactive programme, usually consisting of four layers, each of which has a direct impact on the end effect.

Point 3: Label selection and deployment location are key to success or failure

About half of the problems with recognition in projects are found in label selection and paste positions, which deserve to be tested over time.

Material determines the label type: Metal surfaces must be labelled with anti-metal (including special suction material), liquid environment should be given priority with HF tags (frequency 13.56 MHz, better penetrating), common plastic and paper assets with normal UHF tags (frequency 860-960MHz, identification distance, lot reading speed).

Paste Locations Impact Reading RateThe label is designed to avoid metal masks and liquid contact surfaces, and then a visual test is done after pasting - to see if the asset is placed in a physical position of use and whether the reader can be identified. The same asset is recommended to be placed in the same direction, so that the batch scan can be easily scanned.

The code code is to be predefined.: The EPC area usually writes asset numbers (e.g. "Code + Asset Category + Serial Number") in accordance with the Enterprise Code, and user areas can write acquisition dates, liability and other extension information. Once the code is finalized, do not easily change it, otherwise there will be a problem with subsequent system docking.

Point 4: Data acquisition point and alignment of operational nodes

The RFID reader is not installed in the best position, but rather in a key node of actual business processes, which would otherwise produce large amounts of invalid data.

Four common key nodes

Select whether a fixed reader or handheld is the same for each node: a fixed reader fits where it must be automatically identified (door-barrel, line of production), a hand-held terminal fits the inventory that requires manual participation, and searchs for scene. The RFID middle is to be reprocessed -- the same label is read multiple times in one second by multiple antennas, and must be combined into an event by "first entry time + departure time" or the back desk will be flooded with noise data.

Point 5: Several pits that can easily be stepped on during landing

In the light of the experience of the projects we have done, several problems have arisen and early planning has saved a lot of back-to-work.

Metal and liquid interferenceThe metal cabinet, medical equipment, liquid containers weaken the RFID signal, and the reading rate falls from 99% to less than 60% in case of serious. The solution is to use anti-metal labels, read and write power, adjust antenna angles, and do on-site signal surveys if necessary.

Tab Paste UnstandardThe main reason for the drop in the project's later recognition rate is that workers on site are casually attached, mistook and covered with oil.

Reader antenna covers the blind zone: The angle of the portal antenna is not right, and there's a situation where you can read it, but you can't read it in a little further. The UHF antenna radiation angle is typically 60-90 degrees round, and you have to adjust it on site when you are installed.

and existing systems: The RFID project is not an isolated system, and ultimately it is going to be connected with ERP, MES, WMS. Predefined the data interface format (common RET API, MQ News queue, WebService), which is much less than the cost of ex post remediation.

Input output is clearer than calculation: Tags, readers, and platform development are upfront investments. The savings come from lower labor costs over time. A midsize manufacturer spends about RMB 200,000–300,000 a year on inventory labor. An RFID system typically pays for itself in one to two years.

Point 6: View specific dimensions when selecting the implementer

The RFID AssetTrack project involves hardware selection, on-site construction and system integration, and recommends several dimensions for the evaluation of suppliers. Shanghai-based Chettech, in its practice, focuses more on pre-situ surveys and tag sampling, doing small pilot reading rates at client sites, confirming that they are correct and then spreading them in bulk, which helps to improve the success rate of the project. It also depends on whether the implementer has a case with industry to visit, provides full chain delivery from labels to platforms, and is timely for post-delivery response, avoiding "unknown" cases.

Proposals for action: pilot from a small scene

If you're new to RFID asset tracking, start with one clearly defined problem, such as toolroom checkouts and returns, high-value consumables traceability, or tracking pallets in and out of a warehouse. Get one end-to-end workflow running before moving on to other assets. Sample testing through launch can generally be done in two to three months without covering the whole plant at once.