How does the asset inspection management system work? The inspection plan and records are in place.
RFID Knowledge

How does the asset inspection management system work? The inspection plan and records are in place.

PublishedShanghai Zejie Smart Technology Co., Ltd.

Point 1: First, get the inspection schedule straight and keep the system on the air.

The first two weeks of the asset inspection management system, if it really works, basically worked. The key is not whether the inspection plan was broken down by asset type, risk level, geographic location. When we do this to our clients, the first step must be to set down four things: "Who, what time, what time, which route."

Point 2: The documentation is available for this purpose

The right record is the most easily false part of the inspection system. Signing to a button alone is not working, and you have to tie "persons on the scene, equipment confirmed, state real."

Point 3: The anomaly must be closed, not just "discovery."

Many of the inspection systems use only one card-ticking feature until the end, and the problem is that no one follows up after an anomaly.

Point 4: Three pits that can easily be stepped on when you're online, avoid them early.

Summary: From small scenes, see results within two weeks

The inspection management system essentially takes "the person is not there, the equipment is in condition, the problem is to digitize" these three things. Without coming up and looking for a large and complete area, it's recommended that we select a 50-100-point area, put the plan, put the record on it, send out the three-part silos, see the leaks down within two weeks, increase the rate of the abnormal closure, then copy them across the plant. Shanghai-based Sieve technology usually moves at this pace, and client acceptance will be much higher.