How can an asset inventory be efficient? Operational organization and efficiency enhancement elements
RFID Knowledge

How can an asset inventory be efficient? Operational organization and efficiency enhancement elements

PublishedShanghai Zejie Smart Technology Co., Ltd.

The asset inventory is efficient, with two thirds of the effort being organized in the front line: a well-defined range, a well-defined grouping, an early drawing of the action lines, and a defunct mechanism. The following points are taken from the physical order.

Element 1: Inventory scope and baseline data pre-empted

Many project counts were inefficient, the root cause being that baseline data were not clearly documented and were on-site.

This step takes about 20% of total labor time but can double on-site efficiency.

Point 2: Personnel grouped by region, resources matched with asset density

Unjustified grouping is the most common waste on the ground.

One precision manufacturer we worked with reorganized a mixed six-person team into three teams assigned by workshop. The time each group needed fell from two days to one.

Point 3: A pre-draw and one-way line.

Poorly planned routes can add more than 30% to counting time.

Point 4: Scanning + positioning to get the data back.

The tools are selected correctly, and there will be a clear gap in data flow efficiency.

When we do the inventory, the scan + offline cache is basic configuration. The error rate of a single disk count is typically between 3 and 5%, and the sweep count is usually under 0.5%. This is also the fundamental function of Shanghai-based Cheeky Way Technologies Ltd. (Shanghai-based) multi-year inventories to undertake sedimentation.

Point 5: Live board, no more than hour

The lack of transparency in progress is the main reason for the uncontrolled count.

Point 6: Discrepancies are cleared on the day and the redisposal is next

The longer the differences are processed, the higher the cost of the refill.

Following these six steps can cut the total time from starting an asset count to filing the results by 30%–50%. Set firm rules during preparation, make progress visible in the field, and clear discrepancies the same day at the end. The better the preparation, the smoother the work on site.