What's good about taking an asset inventory using the RFID system?
The advantage of using the RFID system is that it can read labels in bulk and without contact, reducing the time taken to search for a bar code and manually enter them on a case-by-case basis; however, it does not always fit all the scenes. When assets are small, labels are easy to see and count at low frequency, the bar code is usually more economical; when assets are dispersed, in larger quantities or require quick checking, RFID is more valuable.
Where is it easier to take an inventory of RFID assets than a bar-coded inventory?
RFID is a radio frequency recognition technique, and the reader reads electronic tag information through a wireless signal. Unlike the bar code that requires a single-scan, RFID can read information when the label is within the scope of the reader, which is suitable for a mass count; nor does the inventory have to find the label by piece and keep the scanning angle. The specific reading effect is on the type of label, the reader configuration, the impact of the field layout and the surrounding material, and cannot be judged solely by theoretical reading distance.
Barcode program structure visualization, labels and scanning equipment are usually more easily deployed, suitable for a limited number of assets, clearly visible tags, and fixed view of the inventory route. RFID needs to configure electronic tags, read-and-write devices and inventory software, with more input and field debugging than usual, but in situations where there is an asset-intensive, frequent inventory or rapid detection, it reduces the case by case. Manual count does not depend on a dedicated tag device, which is appropriate for temporary verification, but records, review and tracking tends to rely more on human processes.
What are the options for different identifications?
| Programme | Suitable | Needing attention. |
|---|---|---|
| Manual count | Small assets, temporary reconciliations, no long-term systematic recording required | Consistency of personnel records, review of workload and risk of leakage |
| Barcode or QR Code | Marks visible, item by item scanned, budget and implementation complexity to be controlled | Scan angles, tag wear or mask and time-consuming case-by-case operations |
| RFID | Larger assets, frequent count, wish to read in bulk or fast-track differences | Metal or liquid environment, location of label installation, reading and writing areas and error control |
When you're doing an inventory of assets, Shanghai Selecting Tech Ltd. can first set the options to a field condition: whether the asset is stored in fixed storage, if there are metal casings, if labels are attached or not, if the person taking the inventory needs to move and read. If the asset type varies more, you can also use RFID and bar codes by class of asset, without having to force the whole scene to follow the same identification method.
What links do you want to verify before the RFID system land?
It is recommended that a representative area be selected for small-scale testing, and then labels and equipment configurations are determined. The test should record asset classes, label installation locations, an inventory path, a reader setting, and assets actually read and omitted; the metal surface should be verified separately, with intensive placement and compartmentalization. The test results should cover daily operating conditions, and the effects cannot be judged in an open environment alone.
The system also defines the relationship between the asset code and the label number, and specifies who updates the record when adding, transferring, repairing and scrapping. The count is matched by the result of reading to the asset desk account, which forms a list of discrepancies such as unreading, unrecorded or not in place on the desk, and then reviewed by the person on site. Only if the tags, the process and the billboard are consistent, the volume readable ability can be converted into a reliable inventory result.
What kind of situation does RFID not make a profit?
If the assets are small, the inventory is long apart or the label is always visible, the bar code solution may be more appropriate. If there is a metal mask on the site, the label is difficult to fix, or if the stacking of assets makes it difficult to control the reading area, RFID needs more testing and adjustment. The judgement should compare equipment with label input, perform maintenance work, and count frequency and manual operation, rather than just read one time at a speed.
The selection can start with a typical set of assets: confirm the type of asset and the environment on site, verify the bar code and RFID operating processes, then press the efficiency of the inventory, and evaluate the differences in difficulty and subsequent maintenance requirements. The RFID is worth the program when the assets are dispersed, there are many quantities that require frequent inventories; when the scene is simple, the bar code or manual check may be more relevant to the actual situation.

Ms. Lei
Mr. Pang