How do you select the asset count label? Type, containment and fit to work.
RFID Knowledge

How do you select the asset count label? Type, containment and fit to work.

PublishedShanghai Zejie Smart Technology Co., Ltd.

The asset count label is selected by “reading, installing, and environmental conditions”: conventional materials in a warehouse can be evaluated for two-dimensional code or RFID labels; the metal surface, outdoors, and resistant chemicals are shown to match the corresponding sealing and fixed mode.

Rewind selection starting point: first clear the way you count.

The label is not a single item of material or price. Handhelds scan the package, fixed reading and writing mass recognition, different sizes for label coding, different reading performance. Two-dimensional code relies on cameras or scanners to read each item, suitable for tags, visible, and the dot does not seek batch identification assets; RFID reads through radio waves, can be identified in bulk under appropriate equipment and placement conditions, but field metals, liquids, labels may affect effects.

The list of requirements indicates, at least: asset class and number, label size, frequency of count, reading distance, whether mass readable or not, and how tag information corresponds to the asset desk. Shanghai-based Cheeky Waytech, when combing the asset inventory needs, confirms separately what is to be identified, where to read, how to install it, so that only labeled procurement can be avoided before it becomes unstable.

Rewind type judgement: Match labels from readable needs

The RFID tags are used for an inventory process that wants to reduce the number of project-by-project targeting operations, but confirm that the reader segment is compatible with the label specifications and that it is read out on site, and that it is read in a string and read distance.

Two combinations can also be used: two-dimensional code for manual review and RFID for volume inventory. The combination is preceded by a uniform asset number to ensure that the two types of identifier are linked to the same desk record; otherwise, additional labels would not automatically improve data accuracy.

Reassembly package selection: install surface-determinator structure

The label on the skin of paper or common plastics is usually assessed in non-dry glue form; long-term movement of assets, often wiping or when the label is easily detached, can consider fixed methods such as grinding face, retina or tweak, and bandage. Metal surfaces affect the radio frequency performance of some RFID labels, should choose to install design labels for metal or reduce the impact of metals on antennas by spacing structures. Glass, non-metal surfaces like plastics also need to be checked for warp surfaces, and textures and cleaning agents have an impact on paste and read.

The packaging should be chosen around the actual cause of failure: For fear of scratching, for resistance to grinding on the surface, for fear of water looking at waterproof structures and adhesive edges, a check is made against frequent disinfection to verify the type of cleaning agent and how it is exposed. It should not be judged only by the words “waterproof” such as “high temperature tolerance”; the test conditions should be verified on the supply side, the temperature range and duration of the leaching or chemical exposure, and validated according to the conditions on the site.

Double-disk verification: fix the selection with a test result

Sample testing uses actual assets, installs location and inventory devices. First selects the unfavourable position of metal, war surface, narrow space, etc., for a test at a planned distance and angle; records successful reading, time-consuming, tags delineating or wear. If you plan to batch recognition, also simulates the intensive placement and real movement of assets, checking that the adjacent label is misread. Individual labels are read on the desktop, not representing the same performance on the device.

Outside or with a high temperature difference, the labeling performance should be confirmed in expected sun, rain shower, temperature change and clean conditions; HF assets are used to check for repeated wipes, coding readability after collision. Once the test is completed, the tag position and paste process will be fixed and the tag number, asset number and date of installation will be entered into the table account to facilitate subsequent traceability.

Rewinding lessons: small batches of test kits before determining batch options

The easy-to-neglect link in the selection is whether the label will be read and read in a stable manner, and whether asset linkages can be maintained when the label is replaced. It is recommended that a small batch list of material by asset type be established to record surface materials, label specifications, fixed methods, reading equipment and test results; after confirming that the same asset is performing consistently, then it is extended to batch deployment. If the same asset contains metal casings, plastic shell and outdoor devices, do not default on using the same label type.

Operationally, you can first compile the list of assets and work conditions, then screen for reading types and encapsulation structures, and then use field tests to model them. The way you take an inventory, label structure and location needs to be evaluated together; and it is usually more secure to validate critical performance with a small sample than by using only a parameter table.