What should be the capabilities of a professional asset management software?
RFID Knowledge

What should be the capabilities of a professional asset management software?

PublishedShanghai Zejie Smart Technology Co., Ltd.

The scaffold that can't be turned over in the warehouse.

Last year we took over a factory that did electronics, and there were more than 1,200 handheld terminals on the books, scanners and test instruments, and a clear financial depreciation statement, but the workshop manager broke one sentence: "I was going to use a scaffold last week, I got three people, I went over two shelves, and I borrowed them from the next workshop." The difference is the most common and painful problem in asset management. This is the mess of "a set of live" assets management software, which can be classified as five dimensions:Full life cycle desk accounts, dynamic location tracking, multi-dimensional depreciation calculations, mobile end-end synergy, and access to finance/ERP systemsWithout one, asset management would be deformed from "manage" to "manage".

A qualified asset system, with five bases.

Full life cycle desk accounts: every step from purchase to write-off

Assets are purchased, stored, received, borrowed, transferred, repaired and maintained until they are obsolete, and every step should be documented in the system. The "striped" here is not just a change of state, but a string of people, time, place, cause, associated documents (purchase orders, maintenance bills, scrap orders). We've seen some plants use so-called "assets", essentially Excel uploads, but there's only an additional access point, and history records can only find the last 30 days, all before it was broken points, and this system is basically useless.

Dynamic location tracking: key to consistency

The professional system usually requires each change of location to be coded, the responsible person, the change time, the new position, and the four reasons for the change are missing. Some more sophisticated systems introduce RFID labels or two-dimensional pasting schemes that make a count with a moving end, which is 3 to 5 times faster than the traditional manual count. When we do the project, we customarily customize the asset to be marked as -- tag content, sticker location, scan in terms of SOP (standard operating process), and the accuracy of subsequent counts can be mentioned at over 95% from 70%.

Multi-dimensional depreciation: financial and business reconciliation

Financial concerns are accounting for depreciation, business concerns about how long equipment takes and how much net there is to change. Professional systems need to move these two logics in the same data source, avoiding a "financial set of accounts, business set of accounts" situation. Common depreciation methods include average age, workload method, double-counting, sum of years, systems support at least 2 to 3 trade-offs, and automatically retrofit historical data after depreciation parameters change, rather than simple coverage.

Mobile-end synergy: On-site operations cannot be based solely on PC

Warehouses, workshops, and work places on outdoor sites are rarely equipped with computers, more mobile phones or PDAs. Asset management software is not available, or the move side can only "not" change, which is very awkward to land. A qualified moving end supports at least a scuffle of the disc, application for application, submission for correction, taking photographs from the scene to take evidence of four scenarios, and also temporarily store data offline, automatically synchronizes when you return to the network.

Communication with Finance/ERP: avoid duplication of entries

The asset data and financial ledger, accounts payable, ERP's material master data are naturally linked. If Excel is manually exported between systems, it takes time and can easily be wrong. Professional asset management software usually provides standard API (data interface) or intermediate-table docking programs that match with mainstream finance/ERP systems such as friend, gold butterflies, SAP, Oracle to support the level of proof. The test is simple: whether a financial voucher can be generated automatically when an asset is recorded; and whether gains or losses can be automatically carried over upon assets being written off.

Different industries, different focus.

The same asset management logic, which is applied to manufacturing, hospitals, schools, rental companies, varies considerably. The following are the concerns of the industries that we have tested over the past few years in our projects.

Manufacturing: equipment protection and spare parts management are at the top of the list

The machine bed in the plant, the Noter Shape, the detection equipment, high value, high frequency of maintenance, and failure to perform effects on the whole line. Asset management here cannot simply look at "assets card" or a PM, Preventive Maintenance (Physical Maintenance) program, check and record, and connect spare parts inventory. A preventive maintenance cycle for an Apostille is usually 500 hours or 30 days, and the system is able to automatically trigger point-checks based on long running time of the device, alert duty-bearers, and automatically generate maintenance work when the site is abnormal. When spare parts are below safety line, it is also necessary to procure them back-to-back.

Hospitals: compliance retroactive and section-level management

Hospital equipment management is governed directly by the Regulations on the Supervision and Administration of Medical Devices. Each device needs a complete purchase contract, registration certificate, inspection reports, repair logs, and mandatory verification records. Asset software must report by department, user, and device type. All original documents and images must remain traceable and be kept for at least five years after disposal. Large Class A equipment such as CT and MRI systems also needs a separate asset record for room conditions and radiation safety test reports.

Schools and administrative services: Conformity is a hard indicator of audit

Schools and government agencies face annual asset inventories and audits, where agreement between records and physical assets is a firm requirement. The system must quickly export data in the Ministry of Finance's formats for public-sector asset management, such as monthly asset reports, annual statements, and detailed disposal reports. It should also support bulk imports and disposals. A school may have thousands of desks and chairs and more than 100 computers, but only one or two asset administrators, so these efficiency tools matter.

Lease companies: contracts, rents and asset status

The asset management core of the operating leasing company is a contract. The status of each rental equipment -- in the lease, idle, maintenance, returned to disposal -- is automatically tied to the lease contract, rent calculation, late reminder, renewal changes are triggered by the asset status. The system needs to support a contract-based statement of three dimensions by type of asset, and physical location and performance of the asset-based asset-to-deficient, avoid "a contract that is still in performance, assets have been lost".

It's a few pits on the ground.

The system is very well-referred and the problems are not detected until it is actually online, with three pits being most common below.

First of all,The history data cleansing is on the line without solid.. Many businesses have tens of thousands of asset records with missing fields, inconsistent names, and disorganized categories. Importing them unchanged makes reports unusable. On one project, we spent six weeks standardizing names and category codes and completing vendor information. After launch, stocktaking was twice as efficient as the previous manual process.

Second,The moving end only has "see" function.Some manufacturers have made the mobile end a "skow tool" and the site has to check it out, get access and return it back to the office recorder, and you're going back to your old habits in practice, and the moving end is set. The eligible mobile end must support the field sweep and complete the change of status.

Third,The permission design doesn't take into account the bits.Asset management involves finance, department, user, and a variety of roles for foreign partners. The power is too thick to overpower the data, which can lead to a process in Cardon. It is generally recommended that the permission be configured by three dimensions: "Sector + Role + Asset Type" to cover 80% or more of the scene.

Before you pick, answer three questions.

Before you communicate with the manufacturer, it is recommended that you think clearly of these three issues and that you take less turns.

First, what are the total assets and growth expectations? Within 10,000 and above 100,000, the performance of the system is completely different. The former can be met by lightweight SaaS (twilight subscription software), while the latter usually requires private deployment (systems are installed on the enterprise's own server).

Second, is the industry strong? Generic asset management systems can cover common needs, but if industry regulations are high (e.g. medical, chemical and educational), it is preferable to select a manufacturer with a case of similar trade, with fewer pits of compliance.

Third, how many people are on the IT team? If there is no full-time IT traffic, SaaS mode transport will have the least pressure; if data are to be localized or Depthly interfaced with internal ERPs, private deployment would be more appropriate but 1 to 2 transport personnel would be reserved.

When doing asset-type projects, Shanghai-based technology usually takes one or two weeks to make a demand diagnosis, to map out the three problems and industry characteristics, then match clients with the deployment of programs and functional modules, and avoid pushing up the list of functionality. Asset management is not about "the last software," but about dispersing the past into Excel, paper documents, the state of assets in human brain memory, and settling into a sustainable retrospective data asset. The system is just a tool, behind which the management logic and downsteps are key.