What is an asset management system? Definition, composition and core values
The forklift that we can't find in the warehouse.
At the end of last year, an electronic components factory ran its year-end stocktake. Finance exported the fixed asset register and warehouse staff checked it against the equipment. More than 30 machines marked "in use" could not be found. Some had been borrowed and never returned, others had long since been scrapped but not written off, and several had never been recorded in the first place. Looking at the discrepancy report, the general manager called in the finance director and the head of IT and said, "If we can't keep track of our assets, they'll swallow up any profit we make."
The asset management system is a tool that is designed to solve such problems. It records all the fixed assets in the enterprise, from "buy in" to "show out": who's using them, where, how much they are worth, should not fix them, when they depreciate, and clearly sees them in one system. In short, it's a combination of "digital books + management processes" of assets.
Why is it always wrong to have the assets on the books and the scene?
The problem is that there are four words: "information is scattered." There are a few locations in which information about the assets of many businesses: there's a master record on the finance side, there's a warehouse account, and there may be an Excel watch at the workshop to record equipment maintenance. These three accounts are separate, nobody synchronizes with anyone.
Even more troublesome, the assets are moving within the enterprise. Today this equipment is in workshop A, it may move to workshop B tomorrow, and it may be loaned to the foreign company plant for a while. If these changes are not recorded in the system in time, the time frame will become normal.
There is another easy link to ignore: end-of-life disposal. A device has been in service for years, no maintenance value, and it should be disposed of by process. But the end-of-life form is required, and a write-off is required, and the whole process is written off from the books, less than a week or two. Many people who are responsible are troubled, put the equipment in the corner, "Let's go back." This one may be years.
What exactly does the asset management system do?
In short, it covers the entire life cycle of an asset. From the time of the procurement request to the examination of the revenue bank, the acquisition allocation, transfer of funds, maintenance, depreciation and accounting reconciliations, and, finally, to the end-of-life disposal, there are corresponding processes and records at each step.
The term "assets" is not the same in different businesses. The most common fixed assets are: plant, machine and equipment, office furniture, computers, vehicles, etc. Some companies also include land tenure, software use rights, and leased equipment. Systems usually distinguish between different types of asset by using the field "asset class", each category setting different management rules.
A standard asset card contains at least this information: Asset number, name, specification type, date of purchase, original value, current user, use department, location, depreciation method, expected useful life, net value. The card is the identity card in the system, and all changes are recorded around this card.
Which modules are usually included in a system?
| Modules | Main functions |
|---|---|
| Asset card management | Establishment and maintenance of asset master data, including numbering, classification, parameters, pictures, etc. |
| Procurement Treasury | Associated procurement process, registration of additional assets and automatic generation of asset cards |
| Transfer of authority | Record changes in asset adopters, departments and locations of storage to support inter-office redeployments |
| Maintenance | Registration of failure recovery, maintenance records, maintenance plans and associated spare parts consumption |
| Depreciation | Automatic monthly depreciation, which supports multiple methods such as straight-line and double-deductible balances |
| Inventory Management | Start an inventory, check with a sweep or a PDA to record the balance and losses of the disk |
| Waste disposal | Initiation of write-off applications, write-offs after approval and recording of disposal income |
| Analysis of the report | Multi-dimensional statement of asset distribution, summary of depreciation, idleness rate, maintenance costs, etc. |
The level of demand for these modules varies from one enterprise, which is dominated by office equipment, to the acquisition of transfers and inventories; to a plant with large production facilities, to maintenance and depreciation. The system’s modules can be activated as needed, without having to be fully opened at once.
What specific problems can be solved once they are used?
The clearest change is faster counts. With paper lists, reconciliation was item by item, and 1,000 assets could keep three or four people busy for a week. Apply barcodes and have staff scan as they go with PDAs. Counts become much faster and errors fall substantially.
Depreciation is automatically calculated from manual to automated. The financial account is charged every month, previously using Excel formulas and re-reconciling once. The system runs automatically according to preset rules, generating a monthly certificate of depreciation, and the financial requirement is only to check for anomalies.
The system clearly shows which assets are not used for long periods of time and what the idle rate is. This information can facilitate internal transfers or disposals, avoiding duplication of procurement.
The auditors need to look at the details of the assets, logs, depreciation certificates, and end-of-life processes.
A few pits that can be easily stepped on during the execution.
The first pit is greedy. The system comes up and tries to run all the operations, all the modules, and the process is stuck in half. It's a more stable way to run one or two core scenes, like "Proceding for Repossession + Access + Inventory" and then expand.
The second pit is the code rule. Asset numbers are the only identifier for asset cards, and it's difficult to change them if they are not clear from the beginning. It is recommended that you take time before the system goes online to set up the classification rules, numbering rules, field specifications are clear, and document them all.
The third pit is the poor quality of data migration. Asset data from old systems or Excel tables, not uniform, are in a bad format, and if you directly import new systems, there will be problems that are not right. Better do a data cleansing before moving, and then repeat, missing fields, obviously wrong records first.
The fourth is to ignore the training of people who use it. The system is better, and it will not be used in vain. If you count it without being skilled, or if you clean it wrong, or if you're missing, or if you're missing, then you can't do it once, you can arrange for questions and a flash drive within one month of getting online.
Shanghai's Technological Corporation, in its service to manufacturing clients, has compiled a list of implementations for these pedals, from demand research to online acceptance, with clear delivery and inspection points at each stage. The customers do not have to search for them, and they can walk less crookedly by following the list.
How to judge whether an asset management system is fit for itself
First, whether the process fit into its own reality. The asset management process is different from one enterprise to another, and the system should be a "fit-for-good" business rather than a "sliding" system.
Second, to see whether the data are secure and manageable. Asset data relate to the financial and operational cores, with storage modalities, authority controls and back-up mechanisms being identified in advance.
Third, it is a matter of whether the service team is good. Asset management seems simple, and real good work requires understanding of many areas of finance, storage, and equipment management.
The problem with enterprises that are poorly managed is not the tools, but the processes and habits that are not built. A suitable system, combined with continuous operations, can make asset management "a problem only discovered at the end of the year" and "a problem discovered as soon as it occurs." This is one of the most real values that digitalization brings to an enterprise.

Ms. Lei
Mr. Pang