UWB positioning applications in asset management: real-time tracking and loss prevention programmes
It took half an hour to find a wrench between the two o'clock of the morning.
Last winter, a shop supervisor at a precision machining plant told us a story that stuck. At 2 a.m., an urgent order came in and needed a torque wrench with a specific setting. The shift crew searched three tool cabinets and two temporary racks without finding it. They finally retrieved it from the home of a veteran operator who had just left the night shift. Rather than lock it in the cabinet, he'd slipped it into his bag. That one wrench stopped the whole line for nearly 40 minutes.
What did the wrench cost? Less than RMB 2,000. But the loss from shutting the line down for 40 minutes was far greater.
The tools, the detection instruments, the molds, the semi-finished trays, the high book value, the high-value, moving, and unlocked assets in the factory are the hardest part of asset management. UWB (Superbroadband, Ultra-Wideband) has been increasingly used in these types of scenes over the years for the simple reason that it can get an asset from "presumably in a warehouse" to "on which shelf level" and can keep reporting on how each asset is moving in real time.
The hidden cost of asset loss is much larger than the book number.
Many factories count their assets at a purchase price. But the real bookkeeper tells you that the cost of losing or misplaced is at least three layers:
- Direct costs: Repurchases are often more expensive than the tool itself, with increased freight costs.
- Cost of shutdown: Key tools not found, production lines were shut down; molds not found and orders were extended.
- Implicit costs: People spend time on "searching for things." There's a saying in manufacturing that, on average, 8-12% of line workers work on tools and materials, which is backed up by time count in multiple factories.
If you move to the hospital, you cannot find a pump, a monitor, or a wheelchair. The nurse station will make one round of calls and the guard will run several more trips.
The common feature of these problems is that assets are moving, people are moving, and static billboards are not keeping up with the dynamic reality. They can't be solved by Excel labeling or by a monthly count.
Three weak sides of traditional management
Before the UWB was introduced, many factories had tried several ways but did not really solve the problem.
The first is the RFID electronic label.The RFID header's identification range ranges from a few centimetres to a dozen metres, and it can "check in and out of the warehouse." But its problem is: something goes into the warehouse, not in the warehouse. Readers only tell you that it passed through this door, and they don't tell you that it's in the rows.
The second is Bluetooth Beacon.The BLE (low-energy blue teeth) position is usually between 1-3 metres in accuracy, and a rough regional location is sufficient but it is strong when it reaches the specific shelf, the specific platform. And bluetooth decays significantly and is less stable in a metal-intensive environment.
The third option is QR codes with manual scanning.The lowest cost, but relying entirely on the human mind. Once the data is cleaned, it is wrong. Take a count, correct the missing data, often longer than the inventory itself.
The three options are short-sets: either in terms of accuracy, or not in real time, or rely on human means. To be "real time tracking" + loss prevention, a technology that can keep up the position and locate with sufficient precision is required.
Why UWB, not Bluetooth and WiFi?
UWB, called Ultra-Wideband, has a fundamental difference in positioning principles with Bluetooth and WiFi. Understanding this difference is the prerequisite for determining whether UWB fits your scene.
Precision difference: 10 centimetres and 10 metres of actual gap
The UWB signal is a narrow pulse of the nanosecond, with an extremely wide bandwidth (usually covered by 3.1-10.6 GHz bands), which allows it to press errors to the centimetre level at range. Common UWB positioning systems can be 10-30 centimetres in a good environment of vision (LOS, Line of Light).
By comparison, WiFi's positioning accuracy is usually 3-10 meters; BLE is typically 1-3 meters; GPS can be a few metres outside, but it's basically gone.
30 centimetres of precision. It means that the system can tell you, "This wrench is in the 2nd floor of shelf 3 and 4th place from left to right." This particle level, when looking for something, doesn't have to go over a whole wall again.
Interference resistance: metal and multi-path dilemma
The hardest thing in the factory is that there are more metals, and people move more. Metals reflect electromagnetic waves, which create multi-routing effects; people move and block signals at short intervals. UWB, because of the very short pulse (narsecond level), has a much better resolution of multiple paths than narrow band signals (Bluetooth, WiFi), and it is clearly more stable in metal-intensive workshops.
But UWB is not all-powerful. It's completely metal-closed space (e.g., in a steel cabinet, in a closed metal box), and the signal is blocked; that's why UWB labels usually need to be hanging or attached to asset surfaces, rather than hidden in metal shells.
The cost of service and the continuation of flight.
UWB labels are less effective than many imagine. A large button battery (such as CR2477) usually allows the tag to work for 1-3 years, depending on the frequency of reporting. It is very different from a second to a minute to continue. In asset management scenes, conventional configurations are reported every 1-10 seconds, which is useful and can run for more than two years.
How to deploy on the ground: from the structure
A UWB positioning system, which usually consists of three parts:
- Tag:Plugged or hung on an asset, actively launching UWB pulses.
- Base station (Anchor):Sets a fixed position at the known coordinates, requiring at least 3 base stations to locate two-dimensional positions and more than 4 three-dimensional positions.
- Positioning engine + Application platform:Receives data from the base station, calculates the label position and pushes it to the board, App or docking operating system.
Begin with a site survey. Base station layout, density, and coverage gaps vary by workshop. On projects Shanghai Zejie Technology Co., Ltd. has handled, a 10,000 m² workshop typically needs 30–80 base stations, depending on ceiling height, rack density, and obstructions from metal.
The second step is the positioning algorithm. The most common are TDoA (time difference), ToF (flight time), AoA (attachment angle). TDoA requires high-alignance but less powered tags for clocks; ToF labels and base stations communicate in two directions, with a slightly higher and more accurate energy; AoA needs antenna arrays that can be used to provide an angleal support. In an asset management scenario such as "high labels, to save electricity".
The third step is to connect the platform. Location data are of limited value, and they are tied together with asset desk accounts, access processes, alarm rules, so that they can develop a complete management capability. Examples are: assets leaving an authorized area for automatic alert; static signals for long periods of time may be lost or forgotten; inventory will automatically generate a list in the library.
How do we respond to the metal-rich, protected environment?
The metal environment at the plant site is the most painful part of UWB deployment.
Cover the question:UWB signals can penetrate wood boards, plastics, plaster walls, but they are shielded by metal. The base station's dots must avoid the metal structure right behind it and if necessary, be sprouted with an antenna to extend out. If the shelf itself is metal, each layer of label should be as visible as possible outside.
Multi-path question:The reflecting signal is superimposed with the straight-to-the-point signal, resulting in a twitching of the location. The solution is two types: an algorithmic layer filters and smoothing of position points over time; and a hardware layer keeps as many distance paths between labels and base stations as possible.
Batteries and casings:Metals hide UWB signals, so label casings are usually plastic or engineering plastic. If the asset itself is a metal shell (e.g., some detectors), then the label can be fixed to the location of the asset in the form of "exterior tag + asset binding".
I'll save you time and money when I get online.
On the basis of the actual project, two of the most direct benefits are derived from UWB assets when they are located online:
The time to find something is significantly shorter.The first-line workers feel the most when they find that "the system can tell me where it is after a report has been lost" and use will rise rapidly, and the self-contained wear and co-operation will improve.
The cost of the inventory has been significantly reduced.Traditional counts need to be cut, shut down, drawn people, UWB systems can do "non-contact" -- open the backstage, where assets are, in non-existent, and whether they were removed from the workshop, as you can see. In some projects, time spent on inventories is reduced by more than 70%.
There are also a number of benefits that are not easily directly accounted for but which are tangible: the loss rate of high-value assets is reduced; audit, inventory reports are automatically generated; asset transfers and access are documented; and the location of assets can be traced back after an accident.
We have to think about a few questions before we go online.
The final series of pedals is provided for those who are assessing:
- Not all assets deserve to be labelled.The cost of single labels, plus the costs of deployment, platform, determines that UWB is suitable for "high value, high mobility, and high cost of loss." A $50 tool does not deserve a few hundred-dollar tag.
- "No one is bad."UWB does not have 100% accuracy of position, and there are always a few points drifting or blind. It is more realistic to locate it as a "substantially reduced search range" tool than to promise an "absolute precision".
- Electricity and offline are hard costs.If you cannot get a line from the site, you need to consider whether the PEE power supply (which transmits both electricity and data through the grid) or solar power base stations are to be considered.
- The industrial adaptation of labels is confirmed.The protection level for oil pollution, high temperature, vibrations and label casings in the workshop is at least IP65 (dustproof and low pressure water column wash) and special conditions such as cold storage and oil immersion workshops are subject to further assessment.
Ultimately, UWB asset positioning is not a new concept, but it can really be used in factories, rooms, hospitals, and it's based on respect for the complexity of the site -- no one is "just loaded" -- surveying, algorithmic tectonics, platform docking, each step of the way, and it's decided to end up. When Shanghai does the project, it would take another week or two more to do the survey, rather than go back online.

Ms. Lei
Mr. Pang