Porcelain rfid electronic tags for high temperature tolerance and containment applications
How high can the ceramic RFID labels last?
The core value of the RFID electronic label is high temperature tolerance. Conventional PET surfaces or paper RFID labels, which appear in an environment above 150°C, are subject to a bubble of face, chip welding, antenna breaking and so on, and essentially scrapping. Instead, the RFID labels that use ceramic plates, depending on their containment process and material grade, are usually read in a stable manner at a continuous high temperature between 200°C and 300°C, with some special containment programs having a short impact of more than 400°C. The upper limit for heat tolerance depends mainly on the combination of ceramic plate materials, the chip welding method and the antenna metalification process.
Why does ceramic material fit into high-temperature RFID labels?
The ceramic substrate is the backbone of a ceramic tag. Common materials are alumina (Al₂O₃) and aluminum nitride (AlN). Both melt above 1,500°C, are chemically stable, and have low thermal expansion. At high temperatures the substrate resists deformation and outgassing and does not react with the chip or antenna, providing a relatively stable structure for the chip.
The RFID chip itself has a temperature tolerance limit, and the working temperatures of the high-temperature special chips that are common on the market are typically between -40°C and +250°C. The ceramic plate is designed to "protect" the chip, while keeping the antenna line fixed, avoiding the break or resistance to drift at high temperatures. Thermal properties of ceramics also help -- when temperature changes, heat is distributed more rapidly within the baseboard, reducing damage to the chip from local overheating.
Moreover, ceramics have almost zero (and far below 0.1%) water intake and in a combination of wet and hoter conditions, they do not expand into stratification as is the case with resin panels. This is critical for many industrial scenarios.
What does the ceramic RFID tag sealing do?
Seal is a key element in determining the ability to withstand temperature. Two main routes are currently HTCC (high-temperature co-burning ceramics) and LTCC (low-temperature co-burning ceramics), which vary significantly in temperature, process and cost.
HTCC High Temperature Co-Borner Process
HTCC uses aluminium oxide or aluminum nitrogen as a tile-based belt, first printed on the raw china with hard metals such as tungsten or molybdenum (which are high melting points and do not melt in subsequent sinters), then paste or bury the chip into it, then form it by burning at one time at temperatures above 1,500°C. The process is extremely hot, materials are well condensed, ultimately become more cyanobservable, and have higher upper limits for the tolerance of temperature, usually for military work, aerospace, etc.
The disadvantages are also clear: high sinter temperatures mean energy consumption, good rates are difficult to control and thallium is less conductive than copper, so HTCC labels usually have a shorter reading distance than LTCC.
LTCC Low Temperature Co-Borner Process
LTCC sinter temperatures range from 800°C to 900°C, and can use silver, copper, and high-conducting metals for antennas, with a good distance. Base materials are usually glass ceramic complexes, thermal expansion factors are more flexible in terms of demand. LTCC is the current mainstream programme for the RFID labels of ceramics in industry, which balance heat tolerance with cost.
The way the chips are fixed is also the way they are fixed. It's common to stick the chips on ceramic plates with high-temperature-resistant voltage or nanogilized saliva, and to air-sealed them with metal or ceramic laminates. The sheet and the plate are sealed with glass or welded, completely isolating water vapour and pollutants. This step has a significant impact on temperature resistance and long-term reliability.
Test after the encapsulation is completed
The sealed labels are subject to several key tests: high temperature aging (continuous work at target temperatures of hundreds to thousands of hours), cold heat shocks (-40°C to +250°C fast cycle) and air-classified detection (helium mass spectrometry leak). Only by the labels of these tests will the corresponding temperature tolerance level be marked.
Where do you use the ceramic RFID tags?
The application is basically tied to "high temperature." Here are some of the more typical areas.
- Steel and metal smeltingSteel track, troupe identification, and model management. Temperatures often exceed 200°C and normal labels fail in days.
- Automobile manufacturingPainting workshops, welding workshops, engine assembly lines, baker at temperatures above 180°C and need to be labelled for readable as a whole.
- Chemical and glass manufacturing(b) Crematorial site identification, flow tracking of the moulds, high temperature and associated dust and chemical corrosion.
- Electricity and energy: high-pressure switch cabinets, transformer circuits, asset management of the parts of the turbine, some of which require long-term labelling at over 150°C.
- Military and aerospaceEngine parts are retroactive, weapons and equipment are managed throughout their life cycle, and extreme requirements for temperature resistance and shock resistance.
For example, a factory that does auto parts has a dry-scrap shop baker temperature of 180°C to 200°C. Used to use an average non-dry glue RFID label, each batch was replaced with a new series of RFID tags, which not only cost a lot, but also often "not readable" on the line of production leads to a retroactive break. When you turn to ceramic labels, the label is repeated in the oven, and reading rates are above 99%, and the trace links are complete.
What parameters are the selection and procurement criteria to be considered?
Not just the business name "heat-resistant" but the parameters and conditions of use. Here's some real-employer advice.
- Confirm the "suspendable working temperature" and "short-time shock temperature."The continuous working temperature is the maximum temperature that labels can expose over time; short-time shock temperatures are the limit that labels can bear for a short period. If you apply the high temperature, focus on the former.
- Know the encapsulation process route: The cost and performance of HTCC and LTCC vary significantly. If your ambient temperature does not exceed 250°C, the LTCC program is more expensive; if it exceeds 300°C or requires air sealing, it will be considered for HTCC or special containment programs.
- Focus on reading distance and protocol: ceramic labels because of the high base plate electrical constant, have some effect on antenna performance and read distance is usually shorter than normal labels. Make it clear whether your reading/writing power and antenna design match.
- Tests to recreate your real job.: Let the supplier provide a sample, and do a small batch of measurements on your own line. High temperatures are just one of these variables, and vibrations, dust, metal reflections affect actual reading.
- Consider mechanical protection.: The ceramic plate, though temperature-resistant, is more clenched and less resistant to shocks than plastic casings. In a scenario with a collision risk, the choice of ceramic label products with metal or plastic shell is possible.
In Shanghai, the project of technology-based selection services, many customers came up with a "300°C" label and they couldn't read it. Then the screen was checked out, not the temperature itself, but the antenna interference from metal cabinets, plus the failure to move the reading and writing power. In this case, the light-for-higher labels are useless, and need to be adjusted together. That is why an on-site assessment of the environment variables is best done before the selection takes place.
The limitations of the ceramic RFID labels are also to be understood.
The ceramic label is not a panacea, and there are several obvious short plates to be counted.
- Higher cost: several times to ten times the normal label, and a small amount is more obvious.
- It's very crayony.: The ceramic plate is vulnerable to shocks, bending is almost impossible and adhesive methods are limited.
- Short distance to read: The high medium constant absorbs a portion of the radio frequency energy, and remote reading requires higher reading and writing power.
- No bend.: The form is usually a hard card or round/tube, and cannot be arced like a soft label.
So, before you choose the type, do you really need to be warm or just occasionally touch high temperatures? If it's just short-lived, low-frequency high-temperature exposure, there may be more economical alternatives.
Let's wrap this up.
The heat resistance of ceramic RFID electronic labels comes from three things: stable ceramic base plate materials, high-temperature chip welding and reliable air sealing. The three combine to keep the labels stable in an environment above 200°C. The selection focuses on continuous work temperature, sealed routes, read distance and real performance tests, not just nominal parameters. If you can communicate with suppliers with specific temperature data, read distance requirements and install them, the program will be much higher and less curved.

Ms. Lei
Mr. Pang