How does the equipment spare parts management system work?
RFID Knowledge

How does the equipment spare parts management system work?

PublishedShanghai Zejie Smart Technology Co., Ltd.

The key to selecting a spare parts management system for equipment is not the number of modules as good as possible, but whether inventory, procurement, access, maintenance and finance can be aligned around the same set of material and equipment data.

Cost comparison: separate bookkeeping or modular synergy

Starting with a table or single inventory module, software and implementation inputs are usually small, suitable for the few material types, access to a low frequency, and maintained by a small number of people; however, when procurement requests, stock levels and maintenance records are dispersed, duplicate entries are easily recorded and inconsistent. The first costs of the modules are higher, material coding is required, inventory rules, approval authority and historical data are processed, and subsequent cross-sectoral reconciliations can be reduced. An assessment can take an inventory of the quantity of materials, average monthly access to the bank, the number of emergency purchases and differences in the inventory, and it is not appropriate to compare only software offers.

Effect comparison: whether the module runs or shares data

The basic synergy links of the system are: maintenance or production requirements to generate spare parts requests, inventory module check-up available; inventory is transferred to procurement approval when stock is insufficient, and the acquisition is entered into the warehouse upon arrival; the receipt is reduced and records of spare parts use are linked to equipment maintenance orders. The inventory module is responsible for quantity and storage, procurement module tracking applications, purchase orders and arrival, maintenance module records equipment failure and usages, finance or cost module is classified according to rules.

When Shanghai selects these systems, Shanghai Tech recommends that a high-frequency business chain be selected for validation: for example, to initiate a spare parts application from the maintenance worksheet, to check whether the approving authority, inventory retention, receipt deductions and cost aggregation are passed as expected, and then gradually expand to procurement and inventory. Receiving and inspection can be done using a physical checklist, checking document status, inventory changes and operating records, rather than simply confirming that page functions exist.

Applicable scene comparison: light management or full process management

If the enterprise is primarily required to know what it has, where it has been given, how much it has received, then you can start using the material desk accounts, access to the warehouse and inventory; if you want to control equipment maintenance usage, procurement cycle, approval authority and spare parts cost, you will be better equipped with maintenance, procurement and finance modules. Multi-warehouses, multi-shift groups or units with critical equipment should also be identified with minimum stocks, maximum inventories, emergency access and cross-ware transfer rules. Parameters should be based on actual consumption and replenishment cycles, avoiding replicating common values.

Common pit: function online, process not connected

Common problems include inconsistent material names, mixed units of measurement, non-verified initial inventory data, too wide a permission set and system processes not consistent with the way in which they are received on site. Clearing duplicates before going online, reconciling the number of accounts and physical quantities; recording applications during trial operations, entering the library, taking over and exiting the unusual situation; regularly reviewing inactive spare parts after stabilization, low stock alert and maintenance records. Module selection is based on actual management issues, first running key data and responsibility nodes, then adding functionality, usually easier to land than one-time spread.