How do you choose the RFID asset management label? Type and use specifications
A common error: the RFID label is not "readable."
Many candidates are RFID labeled with the first reaction: price. In fact, frequency, sealing, protocol is wrong in three dimensions, and there's a problem of not reading, not reading or putting it on for a long time, but getting back to work with more money. Set the frequency, then book the seal, and finally look at the protocol, which is a more secure choice.
First tier: frequency determines the reading distance and scene
The RFID labels are divided into three broad categories by frequency of work, each with a very different characteristic.
Low frequency (LF, 125-134 kHz):Short reading distance, usually within 10 cm. The advantage is that it is permeable, free of water and metal interference, often used for animal traceability, simple door-to-door prohibition.
HF (HF, 13.56 MHz):The common protocol is ISO 14443 and ISO 15693, with a reading distance of about 1 metre. Ban cards, library book labels are all this type, and NFC phones can read and write directly.
UHF (UHF, 860-960 MHz):Read range can reach 3–10 m or more, with bulk reading of hundreds of tags at a time. This makes it the prevailing choice for asset counts, logistics, and warehousing. It is sensitive to metals and liquids, however, and requires a design suited to those conditions.
The simple logic of the frequency selection is: do you want to read it in bulk at a distance? Yes, just UHF; as long as close-range identification is sufficient, HF or LF will be sufficient.
Second floor: the seal is to be put on.
The labels of the same frequency, their shape and materials have a direct impact on their availability.
Inlay (naked/dry glue tag):The chips are on the antenna, which is a PET or paper sheet, and can be printed on the equipment surface.
Hard Tag (hard tag):The outer casings are usually ABS or PC plastics, which are resistant to falling, waterproofing, high temperature-resistant and suitable for outdoor equipment, tools, medical devices.
On-Metal Tag (anti-metal tag):add an isolating layer between the chip and antenna and are designed for metal surfaces such as server cabinets, transformers, and steel shelving. Applying a standard UHF tag directly to metal can reduce read range from 3 m to a few dozen centimeters, or make it unreadable altogether.
In addition, there are laundry tags for high-temperature water washing, cable tags with laced cords and wristband labels for people to manage, which can be selected by the use of the scene.
Third level: protocol and chip decision compatibility
The most common agreement for UHF labels is the EPC Class1 Gen2 (also known as ISO 18000-63), which is supported by mainstream readers.
- Common chips are the Alien Higgs series, the NXP UCODE series, the Impinj Monza series, etc.
- The EPC area (used for the sole identification number) is generally between 96-496 bit, and is sufficient depending on how much information you want to encode.
- The TIID area is the sole number of the plant and cannot be rewritten, often for use as a security or traceability.
The HF labels are separated by ISO 14443 (A/B) which is a close-to-door agreement (e.g., door-barrel, bus card) and ISO 15693, which is more remote to read and write and suitable for asset management labelling.
Selection and use norms
Re-selection by asset type:The three-tier chaining of principles above would allow for more visual labelling of assets.
Office IT equipment(computer, printer, server cabinet): A row of a wheeled cart can be cleaned when the count is passed using UHF against metal labels, side or top of the counter with a reading distance of 3-5 metres.
Tools and instruments(Wrench, oscillator, portable equipment): With a hard or taped UHF label, strapped to the handle or placed on the shell, anti-oiled, grinding.
Archives and file cabinets:HF does not dry glue labels or UHF print tags, which are placed on file boxes or cabinet doors. People go close to the disk and use HFCs; if you want to read them from a side of a closet, then use the UHF.
Outdoor assets(Electron equipment, containers, well covers): Stabilize with a hard metal-resistant label, or a bolt or nail.
Medical equipment:HF or URHF hard labels, which are materials that are resistant to alcohol wipe and high temperature disinfection.
The posting is also a technical job:A nice label, and it's not readable.
- Cleaning of surfaces:The sticker is cleaned with alcohol and the oil and dust are removed, otherwise it will rise for a long time.
- Avoid metallic naked:The UHF anti-metallic label requires the entire metallic layer to be attached and not to leave bubbles; normal UHF tags are placed on plastic or wood surfaces as far as possible.
- High-level consistency:A lined cabinet should preferably be labelled at the same height to facilitate alignment of the reader antenna.
- Coding harmonization:The EPC code suggests that the inventory data be recorded directly in the accounts by a rule code, such as "Category Designator-Asset Category-Serial Number", without any further re-collation.
- Batch tests:Tag a small batch first and scan it to confirm the read rate, usually required to be above 99%, before scaling up. Shanghai Zejie Technology Co., Ltd. saw one project deploy over 1,000 tags without a small-batch test. Ten percent would not read, and ultimately the entire batch had to be reworked with new chips.
- Retain document:The label batch, the TID section and the loading position are recorded and the corresponding batch is found directly after several years of trying to replace or add.
The core idea for choosing labels
Set a frequency (or not to be remote), then set a seal (on what material) and then see the protocol and chip (or not to connect with the existing system). Any one step wrong will cause problems in the use of the back.
When starting RFID asset inventory, test a small batch of about 100 tags before buying in volume. Verify range, the proportion of tags read, and the mounting process. We've used this more reliable approach for several warehouse and manufacturing inventory projects.

Ms. Lei
Mr. Pang