What are the functions of the rfid smart channel, door-to-door control and data-motion analysis?
Many people are stuck on the same issue when they choose to block them: is it enough to install a common-branch brusher or do you go straight to the RFID smart channel? The criteria for judging are not complicated -- if you just run dozens of people in and out, the normal-calibling machine is sufficient; if you need to identify a large number of items at the same time, the entry and exit logs will be able to show the value of the RFID walkie mechanism directly to the system that comes to you. This article is from a door-barrier control, data connection, application, four dimensions of the usual problem, and clear about the functions and boundaries of such devices.
Door-ban control: From "Recognize a card" to "A group of labels go through it."
The traditional gate with IC card readers can read only one card at a time, identifying the distance of 5-10 cm and not determining direction. The RFID smart channel works in very different ways -- with an UHF (UHF, commonly used in the country, 840-925 MHz) antenna arrays, which are remotely read by electromagnetic waves and pasted on the electronic labels of the clothing, trays, assets or archives.
In practical terms, single-stage devices can identify more than 200 labels at a time, and read distances can be reconciled between 0.5-6 metres (through power and antenna configuration). Several employees walk through the channel, and the system records everyone's entry and exit, direction, time stamp, without having to brush the cards.
The other is the ability to be asked about directional judgment. There are two common approaches: one is to install an antenna set at each end of the tunnel, and which group is read in the direction of entry and exit by label; the other is to make a second confirmation with infrared re-shooting or camera. We have seen only RFID-based orientations in the warehouse project, and we have encountered two people passing through closely, occasionally miscalculating them, and then stabilizing with a pair of infrared sensors.
The subject of tail-proofing is also indiscreet. It is only by RFID that it can be established that "the labeled thing passed," and it is not clear whether an employee carries a load of goods or a group of employees each. So most scenes will link the RFID channel with the wing gate, three gates, and then see the legal tagging machine, without reading the label or blacklist label, the switcher is still moving, the beeper alerts.
Data connection: How did the tag event get into the business system?
Looking at the RFID channel alone, it produces a record of events "who, when, from which direction, through which channel." The record is of limited value in itself, and the real value is that it can enter WMS, MES, ERP, these business systems, and become operational data.
In the case of warehouses, where electronic and warehouse labels are read at the same time as the goods are entering and leaving a corridor, the system automatically generates a bill of contents or a bill of contents, stores are updated in real time, and the manual sweep is saved. We have seen similar usages in manufacturing projects -- semi-finished trays go through the next workshop, and automatically record process switching in MES, so that the head of the workshop does not have to press Excel any further.
There are three types of agglomeration, which are sorted in terms of flexibility:
- Intermediate delivery: Channel machines push identification data to message queue (MQTT, Kafka all), business systems subscribe to and process them themselves with the highest flexibility and minimum cost of change
- API interface: HTTP interface check events for the active conduit of the operating system, suitable for a low-volume scenario and simple
- Database direct connection: open the incident schedule of the walkie-talkie to direct querying of the operational system, most economical but highly condensed, and later in a troublesome situation
The link to video surveillance is also a high frequency requirement. When the passer-through reads an abnormal label (blacklist, unauthorized tag), it triggers a camera grab, saves the image and tag ID together, and then traces it back. Shanghai-based Chosen-Tek will recommend that clients tie down the event and the video slices over time in some of the projects with high reconciliation requirements, which are significantly more efficient when problems are detected.
Apply scenario: what really fits on the RFID channel
Not every access control application needs an RFID portal. These units cost considerably more than standard gates, typically RMB 20,000–50,000 per lane before tags and back-end software. They are not worth the expense if the application does not need them.
The scenes that fit on are typical of several types:
- Warehouse logistics: bulk-to-volume movement, requirement for automatic inventory counts and access to warehouse registration
- Archives or books: If you have to trace the movement after a label, the RFID channel can replace the original bar code scan with manual registration
- Production workshop: Flow control of work-packages, semi-finished trays, automatic nodal recording by RFID channel
- Personnel management on large campuses: Thousands of daily entries and exits can overwhelm conventional card taps. RFID badges enable identification without stopping.
In turn, office doors are closed, sector entrances and entrances are accessible to dozens of people. There is no need for RFID walkie-passes, and a regular gate is enough for brush cards or face recognition.
Several pits common to deployment
The RFID walkie-cliper looks simple, has a lot of experience in the actual project, and several experiences are available for reference.
Metals and liquid environments interfere with identification.The UHF label works on electromagnetic waves, the metal is reflected, the liquid (water, chemicals) is absorbed, so the tag recognition rate on the metal tray will drop, and the labels around bottled liquids are not read in full. The solution is to use an anti-metallic label or adjust antenna angles and power, but it has limited effect.
Antenna power cannot be at the top.Some customers want to read as far as possible, and pull the launch power near the regulatory limit, so a few metres outside the channel can read the labels, and the tags on the passersby are misread into the system, instead they pollute data. It is generally recommended that, while ensuring that there is steady reading within the corridor, the power be kept in excess of it, and the access door is shielded.
The label paste position is well-regulated.The identification is much less effective when attached to the metal surface, in the back of the body, and in the coatings.
The docking with the back-office system is not to wait until the equipment arrives.Passage machines are generally responsible only for pushing events to the middle or open interface, and business systems are to be deciphered, linked, and re-entry logicd in advance of the IT team, without which data cannot be installed into the system and the value is significantly reduced.
Summarizing: The core value of the RFID smart channel is not "replace a lock" but "to turn people and objects into data that business systems can use." The selection starts with a good idea of whether there are many labels in the scene, whether or not they need to be connected to the system -- these two questions have clear answers, then evaluate specific equipment and integration options before going on a curve.

Ms. Lei
Mr. Pang