rfid Distinction from bar code: comparison of storage logistics scene application differences
RFID Knowledge

rfid Distinction from bar code: comparison of storage logistics scene application differences

PublishedShanghai Zejie Smart Technology Co., Ltd.

Element 1: The maximum efficiency is determined by the reading and writing mode

Barcodes are read by optical scanners, and must be accurate, close, sweep-by-scanning; RFID (radio frequency recognition) is transmitted by electromagnetic waves, and tags enter the reader antenna to be read automatically, without being matched or unboxed. A fixed RFID reading channel can be identified on the production line with more than 200 labels, usually 1 second scan of 1-2 times for a single scanning gun. This difference directly determines the ability to swallow at the vault, the count, the gap in the intake capacity of the out-of-stock: every day access to a warehouse under 5,000 items, the scan and PDA are sufficient; above this scale, the mass reading value of RFID begins to reflect.

Element 2: Data capacity and rewriting

A one-dimensional bar code usually contains 8-30 characters, QR code (QR Code) can reach hundreds of bytes but can hardly be changed after it is written; the EPC (electronic product code) area of the RFID label is generally 96-496 bit available, and the user area can be extended to KBs and support multiple writing. This means that RFID can carry SKU (inventory unit), batch, active period, storey, flow status etc., more dependent on back-office system connections. Shanghai-based technology, when it comes to programming for its clients, uses this "labeled information volume" as the first indicator -- it determines whether to change the label or change the system later.

Element 3: Cost structure differences depend on the full cycle

Single price, bar code labels are a few cents, and the RFID tags usually vary significantly between 0.5 and $3. But the warehouse scene calculates total ownership costs: Sweeping requires a person-by-person operation, with labour costs rising linearly with throughput; RFID input readers, tunnel channels or robot count devices, followed by low marginal costs. A customer who makes a shoe-shoe split measure: In a warehouse that swallows 8 million items of clothing each year, the RFID program returns approximately 18 months, and the annual savings in manpower and error cost is over $600,000.

Point 4: Applicable boundary in the storage scene

Disassembly the storage into several typical links, and it will be clearer for care:

Few of the warehouses in the real-life process are only one, more than a "full-of-the-art RFID+ zero barcode" hybrid.

Element 5: Environmental adaptation and reliability

Barcodes are resistant to stains, wrinkles, faded colour, oil pollution or condensed water cover may not be read; RFID labels can withstand –40°C to 85°C, water washes, anti-oil, but metal and liquid environments block signals, which require a metallic tag or an adjust to the antenna layout. Cold chains, chemical chemicals, car parts, etc., have more obvious stability advantages; common day-to-day distribution centres, bar code-and-overhead labels already meet most of the requirements.

Point 6: Several practical suggestions for selection and landing

First, consider volume. RFID pays off more clearly at warehouses that move over 10,000 items a day, handle many SKUs, and hold high-value goods such as electronics, pharmaceuticals, or precision parts. Otherwise, barcodes are more economical. Second, pilot before rolling out. Choose one category and one aisle, collect three months of real data, and then decide whether to expand. Third, don't buy tags on price alone. UHF (860-960 MHz) tags vary widely in price, and inconsistent chips directly lower read rates. Verify with a small batch first. Fourth, plan the WMS and tagging system together rather than adding a tagging strategy after building the system.

Point 7: The hybrid structure is the final form of most warehouses

It's common error to use RFID and barcode as alternatives. They are essentially tools for different identification accuracy: RFID solves "volume, distance, rewriting" and bar code addresses "low cost, zero deployment threshold, readable." A mature solution embeds them into the same process -- tray-mounted RFID, box-coding, key item-loading, one RFID, access to a reading pipe, zero with a PDA tube. In some of the projects we do, mixed structures can press 30% to 50% of the label costs of pure RFID, reducing the size of the plate by more than seven percent, which is a more realistic path for most medium-sized warehouses.