What are the types of rfid handheld terminals, functional differences and an analysis of selected thinking?
RFID Knowledge

What are the types of rfid handheld terminals, functional differences and an analysis of selected thinking?

PublishedShanghai Zejie Smart Technology Co., Ltd.

Many people think that RFID holds the same kind of stuff.

The key to determining whether it can be used is three things: frequency, form, software. First, you know what frequency band labels are to read, in which environment, and then you go to the model list and choose configuration, and not the other way around. Model selection is actually a spectrometric of scenes, not a stack of parameters.

I. Frequency slots determine which labels to read

UHF (860-960 MHz)

Logistics warehousing, retailing of the inventory, electricity inspection of these scenes mostly uses UHF, which corresponds to ISO 18000-63 / EPC Class1 Gen2, an international universal agreement that typically reads at distances of 1-10 metres, and can read at a group speed of 50-200 labels per second (manager specification calibration). Group reading is the core value of an UHF handheld, and no more scanned loads are required.

Weaknesses are also evident: the metal and liquid environment will be expected to deplete signals significantly, requiring a combination of anti-metal labels or media pads.

HF (13.56 MHz)

The reading distance is usually not more than 10 cm, which is close enough to the scene, such as a door store for cash, book loan, ticket checking. The protocol divides ISO 14443 and ISO 15693 in two branches: the former is secure, more closed, bus cards; the latter is object identification, more used in books, jewellery labels.

Low frequency LF (125-134KHz)

New projects are less useful, mostly compatible with established systems.

If a project has both a personal identification card and a cargo label, it can select a dual or multiple-frequency handheld, without changing equipment at the cost of volume and price.

II. Form determines whether or not the work space is available

Handheld machines are common in three forms: PDA straightboard, gun handle (with handles and triggers), demoliable modules.

The protection level is another key parameter. Warehouses, sites, cold chains, which require at least IP65 (dustproof low pressure water column), freezers or outdoors may require IP68 (premination). Falling specifications are common 1.2 m, 1.5 m, 1.8 m, and 1.5 m cover the general floor in basic terms, with a better choice of a size of 1.8 m or more for high-level work on stereo banks.

III. Performance parameters depend on the actual performance

The specification table is very large, and a few of the real impact statements are available.

Distance and Group Speed

The UHF handheld is labelled as having a reading distance of more than 10 metres, which is measured by a special label under laboratory conditions. The main point is that the group reading speed (number of labels per second) and error rate are normal.

Resuscitation and battery

UHF modules are more power-consuming, with normal 4000-5000 mAh batteries scanned at full capacity for approximately 4-6 hours. If a shift of 8 hours and the scan is dense, it would be better to choose between 6700 mAh and above, or to have several more cells rotated.

Connectivity

Wi-Fi is the basis, and an enterprise-level handheld usually supports 802.11ac. 4G/5G is suitable for large-scale mobile operations such as long-distance transport, outdoor inspection. Bluetooth is used to host externals like printers, headsets, PDA bracelets. GNSS (GPS/BeiDou) provides asset inspections that require location, vehicle dispatching.

System and interface

Android is already the dominant industry, applying eco-improvements, and redevelopment costs are low. The old project is also using fewer Windows CEs, mainly for compatibility concerns. SDK openness directly affects the software team's workload, and API files and illustrative codes are more worth comparing than brands themselves.

IV. Configuration by scene reverse

Shanghai Select Tech Ltd. has learned an lesson from project delivery: drawing a scene before choosing a model is much more efficient than holding a model list. Below are the configurations of several common scenarios.

scene Recommended frequency bands Form Key parameters
Clothing/retail stores UHF PDA Straight Easy, group reading 100 sheets/s above
Storage/logistics separation UHF Gunshot. IP65 and above, trigger durable, re-engage 8h+
Electricity/pipe inspection UHF + GNSS Industrial protection IP68, high and low temperature. Long stay.
Paper/book/member HF PDA Straight Support ISO 14443/15693, optional NFC
Refrigeration operations UHF Gunshot. - 20°C, working, battery-low temperature.

V. Several hidden costs that are easily ignored

VI. Recommendations for procurement

Answer three questions before looking at the model list: first, the type of label to read and the distance; secondly, whether it's an outdoor/cooler/metal-intensive area or an operating environment; thirdly, which system is the data that will be sent back to, and can not be redeveloped. These three questions are clear, and the model is a configuration list.

If the budget allows, rent several demo units and run them for a week or two in real conditions. Only on-site tests can show what read range, bulk read speed, and grip comfort are really like. One scan on the shop floor tells you more than reading the model list ten times.