rfid handheld manufacturer selection, after sale, to support customization
RFID Knowledge

rfid handheld manufacturer selection, after sale, to support customization

PublishedShanghai Zejie Smart Technology Co., Ltd.

The choice of rfid's handheld machine is similar to the specifications, and what really opens the gap is the speed of the post-sale response and the sincerity of custom adaptation. After six months of deployment, it is the factory that is willing to follow up and change.

Point 1: Don't look at the parameter table, first look at your own scene.

The RF-handheld, the UHF reading and writing distance is almost 0-10 meters in this area, the protection level IP65 starts, and 1.5 metres drops are basically a standard. These parameters are enough for one glance, and it's your specific scene that really determines the type:

Point 2: Respond speed after sale, check before signing.

Just listen to the "24-hour response" that sells. It depends on how the contract works. Ask a few specific questions:

Point 3: The customization capability is three-tiered, vaguely "supplable"

The custom is very shallow in the factory:

The quick-test question: "Can you change the trigger logic so that the scan key only triggers a read card when there's an object within 30 centimeters?" Answer "yes" immediately, with a second level of customization; say "go back and evaluate" -- probably not as much as it is.

Element 4: Frequency of solidware updates and long-term support commitments not to be ignored

The rfid handheld solids will be obsolete. New tag chips will fit, EU regulations like RED will be updated and the group-readout rate bugs will need to be repaired.

We encountered this with a customer counting utility assets. Its original handheld reader had been discontinued, but hundreds were still in service. As soon as spare parts dried up, maintenance costs soared. When Shanghai Zejie Technology Co., Ltd. helped the customer switch solutions, it required the new manufacturer to commit to supplying spare parts for at least five years before signing the contract.

Point 5: Supply chain stability, after which the epidemic becomes a hard indicator

In the shortage of chips in the 2021-2022 wave, many manufacturers have dragged their delivery cycles from one or two months to more than half a year.

Element 6: SDK openness directly determines the cost of integration

A closed SDK may add 2-4 weeks to your development cycle. To complete the SDK document, focus on:

Point 7: Run the sample test, it'll work better than any endorsement.

Take 2-4 weeks to do a small POC check, not just the sales:

Point 8: How does the short list go?

Shortlist no more than three suppliers and put each through these five checks:

  1. Responding to SLA's contract.
  2. SDK Document Full Available
  3. A commitment to at least three years of firmware support
  4. Identification of customization capabilities at the second level and above
  5. The real reference that you can reach.

The rfid handheld is not a one-time purchase, but is to run with you for three or five years.