RFID electronic labels for goods vs bar codes: comparison of costs, efficiency, functions
RFID Knowledge

RFID electronic labels for goods vs bar codes: comparison of costs, efficiency, functions

PublishedShanghai Zejie Smart Technology Co., Ltd.

In the area of commodity identification techniques, RFID electronic labelling of goods and bar codes are two mainstream programmes, with differences in cost, efficiency and functionality determining the difference in their application.

The bar code has a... advantage in terms of cost. The traditional paper bar-code labels are only 0.01-0.05, and the printing equipment is low-cost, suitable for low-cost, large-volume commodity identification. The RFID goods electronic labels are 0.5-2 dollars, and additional readers and data systems are required to provide high initial input, but after scale application, the long-term combined costs are reduced by increased efficiency.

In efficiency, the RFID label is over-scanning. The bar code requires manual scans on a piece-by-case basis, one-piece recognition takes 1-2 seconds and is susceptible to stains, wrinkles, and impacts identification success. The RFID tag supports non-contact mass recognition, with dozens of labels within 10 metres read at the same time, thousands of commodity inventories taking only 5 minutes, and efficiency is 50-100 times the barcode, especially for high frequency disk locations such as warehousing, retail and so forth.

At the functional level, the advantages of RFID labels are more comprehensive. Barcodes can only store 13 bits of commodity code, information is single and non-modifiable; RFID tags can store hundreds to thousands of bytes of data containing complete chain information such as batches, logistics tracks, and support rewriting. In addition, RFID labels are strong anti-polluting, they work in damp, oil-contaminated environments, and barcodes cannot be identified if they are tainted. In the area of security from pseudotrace, RFID encryption chips can effectively prevent imitation, and bar codes are easily copied and less secure.

In a combination, bar codes are appropriate for low-cost, low-frequency-recognised scenes, such as flat-speed fast-forwards; RFID labels are more suitable for areas with high requirements for efficiency, data depth and safety, such as high-end retailing, pharmaceutical cold chains, etc. As technology develops, RFID costs are declining, and they are gradually replacing barcodes in more scenarios.