RFID Industrial carrier vs Traditional bar codes: good and bad comparison in industrial automation scenes
RFID Knowledge

RFID Industrial carrier vs Traditional bar codes: good and bad comparison in industrial automation scenes

PublishedShanghai Zejie Smart Technology Co., Ltd.

In the industrial automation scene, RFID industrial carriers and traditional bar codes are used as mainstream information tagging techniques with each of their respective advantages and disadvantages, and selections need to be combined with the needs of the scene.

In the interactive way of information, traditional bar codes are scanned by optical, needing to be labelled visible and close-ranged, and automated production lines can be disabled by the shift in the position of work items, such as car welding wires, mechanical arm grabs may block bar code, leading to failure to read. The RFID industrial carrier reads and writes through radio frequency signals that are not contactable, penetrating oil pollution, dust, completing data interaction within a few metres, without... placing it in place, significantly increasing automation continuity.

Environmental adaptation, traditional bar code resistance to disturbance, high temperature, damp, oil-contaminated environment, food workshop bar codes are often blurred and storage dusts can be overwritten by bar codes. The RFID industrial vehicle is designed according to industry standards, with -40 °C to 250 °C temperature differentials, antivibration, chemical corrosion protection, metallurgy plant steel plume tracking, chemical workshop material management, etc., all stabilizes.

The data management capability is that traditional bar code storage information is fixed and limited in volume, with only 12-20-bit characters, cannot update production data, and needs to be traced to a database. The RFID carrier can dynamically store large amounts of data, record processing parameters in real time, quality check results, etc., supports full life cycle traceability, and electronics plant PCB Board production allows updating of data with the process, and problem-searching becomes more efficient.

In terms of cost and efficiency, traditional bar code is low, easy to make, suitable for low frequency, static identification scenes like batch marking. But bulk recognition is inefficient, so you have to scan them one by one. The RFID carrier is expensive at first, but can be used again, with several hundred UHF labels per second, more than 80% of storage point efficiency, and more economically more widely applied over time.