RFID hands-on reading and writing devices to test the practical skills of reading and writing distance
RFID Knowledge

RFID hands-on reading and writing devices to test the practical skills of reading and writing distance

PublishedShanghai Zejie Smart Technology Co., Ltd.

In using RFID's hand-held reading and writing device, it is important to know how far you can read and write. This is directly related to the application of the device in different settings.

... that the environment is fully considered for testing. In the environment, factors such as electromagnetic interferences can have a significant impact on reading and writing distance. For example, in the storage environment of metal-mounted rims, metals are shielded and reflected to radio frequency signals, leading to signal decay. Therefore, areas that are empty, free of large metal barriers and with small electromagnetic interference should be tested as far as possible, such as open indoor sites or outdoor spaces away from electronic devices, to obtain more accurate basic reading and writing distance data.

The RFID has a power-regulating function for the launch. Properly increasing the power of the launch, which increases the intensity of the signal and thus the distance from which to read and write. But it needs to be noted that the power of the launch is not as high as possible, that it can cause interference with other equipment and may violate the radio regulations. Usually, at the time of testing, the device's default power can be increased gradually by a small amount and the corresponding reading and writing distance changes are recorded, and the power set can be found.

The choice of labels also has an impact on the test results. Different types, dimensions, material RFID labels have different properties. For example, large size labels are usually more capable of receiving and reflecting signals than small size tags, and read and write at a distance. At testing, tests should be based on the actual application scene to select the corresponding type of label to ensure that the results are close to real use.

In addition, there are techniques for the operation during testing. Maintaining the device and labels vertically and evenly, avoiding excessive or slow movement that leads to a signal instability. At the same time, the height of the test needs to be noted, as well as placing the label at a level similar to that used in practice, such as in the logistics package recognition scene, where the simulation package is tested at the height on the conveyor belt, which more accurately reflects the reading-writing distance of the device in the actual operation.