RFID Anti-Metallic Label Test Environmental Critical Care, Shanghai-based Smart Technologies Ltd.
In all industrial production, logistics storage and asset tracking scenarios, RFID anti-metal labels are a unique feature that effectively solves the problem of general labels being disturbed in metal environments. To ensure their reliability in practical applications, it is essential to set up a test environment, which is the following area for focus on testing.
Temperature affects on-metal RFID tags ... . Electronic components are temperature-sensitive. Heat can cause circuit drift, abnormal reads, and even changes in how the tag adheres to metal. Cold can slow response and delay transmission. During testing, simulate the temperatures expected in service, such as -20°C to 60°C in industrial environments, and ... observe performance at different temperatures.
The moisture factor is also not negligible. High humidity environments can form water vapours in the labels that are exposed to metal surfaces, and penetration into the interior may cause short circuits, damaging labels. In some wetty-sensitive industries, such as food cold chain logistics, labels need to respond to humid conditions. Test environmental moisture should be based on actual scenes, generally controlled at 20 to 90 per cent relative humidity, monitoring the stability and reliability of labels within this humidity range.
The metal environment is the core consideration for testing RFID Zon-metal tag. Simulates multiple metal materials and surface conditions, such as smooth stainless steel, rough iron plates, because of the reflection of different metals on radio frequency signals, with different absorption properties. At the same time, adjusting labels to metallic alignments, distances, labels closely bound to metal, and if there are a small gap, signal performance will be different. Using a full simulation, evaluates the ability and stability of the label to read signals in complex metal environments.
EMPs are unavoidable. RFID technologies rely on radio-frequency signals, and the associated powerful electromagnetic interference sources, such as large telecommunications bases, industrial welders, can seriously interfere with the interaction between labels and readers. The test site should be remote from these types of interference sources or use electromagnetic shielding to ensure that the signal is pure in the test, and to accurately measure the distance between the reading and writing properties of the labels and their transmission in a complex electromagnetic environment.
The light conditions also work on the metal-resistant RFID labels of some special mass. Long-term, high-light directs can cause the label surface material to age, change performance, and influence the treatment of radio frequency signals. If the label application scene is photometrically applied, the test must simulate the relative light strength and duration, taking into account the long-term effects of the light on the label's performance. Only at a full range, scientifically controlled test environment factors can you obtain... credible RFID anti-metal tag data that provide a solid basis for its wide application.

Ms. Lei
Mr. Pang