RFID Non-Dry Electronic Label Test Environmental Critical Care, Shanghai-Shanghai-Shanghai Smart Technologies Ltd.
The choice of the test environment and control is essential when testing RFID's non-dry glue electronic label. The right environment ensures that the results reflect the label performance and provide a reliable basis for its application in the actual scene. The following are the areas of focus in the test environment.
The temperature conditions cannot be ignored. The electronic components in RFID are less sensitive to the temperature. At high temperatures, label internal circuits may undergo a functional drift that leads to signal reading anomalies, which may even reduce dry glue viscosity and affect the sticker ' s strength. At low temperatures, the response speed of labels can slow down and data transmission is delayed. Therefore, testing should simulate the temperature range used by labels, such as the common 0°C to 40°C, to assess their performance at different temperatures.
The same is true of humidity. High humidity conditions make label surfaces condensed with water vapour, and if the water gas penetrates into the interior, it causes short circuits and damage to labels. In some applications with higher moisture levels, such as fresh storage, fruit and vegetables logistics, the tags are tested. The moisture of the test environment should be based on the actual scene, generally controlled at 30-80% relative humidity, monitoring the stability and reliability of labels within that humidity range.
Electromagnetic interference is an important consideration in the test environment. The RFID technology relies on radio-frequency transmission data, and the sources of powerful electromagnetic interference around it, such as large telecommunications bases, industrial welders, microwaves, etc., can seriously interfere with the interaction between labels and readers. The testing site should be far from such a source or use electromagnetic shielding measures to ensure that during the testing process the signal is pure and to accurately detect the reading and writing properties of the labels at a distance from the signal transmission.
The light conditions also affect the non-dry RFID ZRFID tag for some of the special mass. Long-term, direct light can lead to an ageing of label surface material and a change in colour, which in turn affects its reflection and absorption capacity with regard to radio frequency signals. At the time of testing, if there are photogenic factors in the label application scene, it is necessary to simulate the relative light strength and duration of the light, and assess the long-term effects of the light on label performance.
The physical environment needs to be adapted. The test environment should simulate physical contact in use, friction, etc. For example, in logistics transport, labels can be squeezed by goods, friction. The tests can be conducted with a certain device that puts pressure on the label, simulates friction, observes whether the label is damaged or not under physical external force, and reduces performance. Only if it is comprehensive, scientificly considered and controls all elements of the testing environment can it be obtained accurately, reliable RFID data are not dryed by electron tagging, and is built to underpin its wide application.

Ms. Lei
Mr. Pang