What is the definition of spare parts for spare parts? Distinction from consumables and accessories
RFID Knowledge

What is the definition of spare parts for spare parts? Distinction from consumables and accessories

PublishedShanghai Zejie Smart Technology Co., Ltd.

The spare parts are spare parts that are stored for equipment repair and replacement, which can normally be reused or have a longer life cycle; the consumables are gradually consumed in use, while the supporting materials are used for production or maintenance processes, which do not normally constitute core components of the equipment.

Start of the reset classification: first look at what the item is to solve.

The type of material that you judge is used to restore the function of the equipment. For example, the bearings of the storage equipment, the transmission charger or control module, which needs to be replaced and put back into operation after damage, usually as spare parts for the preparation. The lubricating oil, the cleaning sheet, the filtering materials, etc., will gradually consume or expire in use, more closely to the consumption material. Welders, glues, washing agents, etc. are used for processing, assembly or maintenance processes, which are typically classified as auxiliary.

Rewinding boundary determination: not just name, but post-use status

The spare parts are often used to repair a component, the old parts may be scrapped, sent back to the plant. The material is replenished by use or use cycle, such as the core being replaced after the replacement period, and the printer paper is continuously reduced during operations. The supporting materials are usually used for ancillary processes that can be consumed, volatile, mixed or left on product surfaces, such as cleaning parts, sealing glues for sealing.

Some items are classified in different scenarios. Filter filter cores can be classified as consumables if they are regularly replaced during the operation of the equipment, and as consumables; if they are specialized components of critical equipment and are managed as spare parts for maintenance, they may also be included as spare parts for spare parts. The determination should record the link between the equipment, whether it is repaired, consumption patterns, access to and inventory management requirements, and allow for consistency with procurement, warehousing, equipment and financial calibres.

Reassembly management results: classification should guide inventory and access

The management of spare parts for the provision focuses on equipment suitability, criticality, delivery cycle and maintenance needs; the management of consumables focuses on unit usage, supplementary cycles and warranties; and the management of ancillary materials focuses on process use, access to quotas and storage conditions. Shanghai-based & Technological Co. Ltd. recommends that at least “uses, associated equipment or processes, consumption patterns, repairability, replenishment cycle” fields be set out, and classification and inventory rules are then determined. Items with similar names but different uses should be coded separately, avoiding mixing procurement, count-taking and cost accounting.

B. Reassessed conclusion: classification by actual use

Simple judgements can be summarized as follows: for maintenance, replacement of equipment components, priority checks are made for spare parts; for the majority of items that are continuously reduced in use or replaced on a cycle basis; for production or maintenance processes, usually ancillary. Once the classification is completed, the access records and inventory changes are reviewed periodically, especially for items with both maintenance and consumption applications, to ensure that rules are consistent with field usage.