What's a nfc card?
What is a NFC card? First, give me a clear definition.
The NFC card is a non-contact smart card working at 13.56 MHz high frequency, which usually has a reading and writing distance of 10 cm, powers and transmits data from the RFID field, which is the short distance of the RFID family, the high frequency, but because it uses two models for point-to-point communication and card simulation, using a more flexible scenario than the traditional RFID card. A simple sentence: the NFC card is a smart card under a close communications protocol.
What's the NFC card working on?
The core mechanism of NFC communications isElectric connection.Think of it as two coils transferring energy without contact. The reader continuously emits a 13.56 MHz alternating magnetic field. When the card's internal coil antenna enters that field, it generates a voltage that powers the chip.
When the chip is activated, it is able to reset the internal data to magnetic fields by ISO/IEC 14443 protocols, and the card readers decompress these signals, and they complete their data reading. The whole process does not require batteries, so the NFC card can be in a thin sticker or key button form.
There are three types of work that NFC needs to distinguish between:
- Card reader mode:Actively read cards on mobile phones or special devices
- Card simulation mode:A cell phone or card is simulated as a card to be read by the reader
- Point-to-point mode:The data is passed between the two NFC devices.
What's the internal structure of the NFC card?
Open a common NFC label and see four layers:
- Alternation:PVC, PET or paper-based material to determine the thickness and appearance of cards
- Print level:Visual information such as logos, text, and QR codes
- Inlay:Core, comprising chips and a wire.
- Bottom:Compensatory and protective layer
The chip layer is the most critical process. The antenna is etched on a 3-7-circle pelvis of copper or aluminium wire, and the circle numbers and shapes directly affect sensor distance and direction. The chip home body usually has only 1-2 square mm, wrapped in a soft panel with an antenna, then presses it to the middle of the surface.
When Shanghai-based Cheetah Technologies, when it labels its products as tracers, they adjust the antenna size to the distance (3cm or 8cm) and fitting (plastic shell, metal surface, paper box). The metal environment shieldes the magnetic field, requires a magnetometer, or is directly retrofitting the anti-metallic label.
What are the common types of NFC cards?
By agreed criteria, the mainstream has these categories:
ISO/IEC 14443 Type A/B:The most widely used NFC card agreement, which is the basis for all public transport cards, door-barriers and identity cards.
ISO/IEC 15693:Also known as the Vicinity Card, which is more distant from reading and writing than 14443, can reach about 1 metre and is used for book management, warehousing counts, asset tracking.
JIS X 6319 / FeliCa:The Soni-led agreement in Japan, which is used by Suica, PASMO and ICOCA, is relatively rare in the country.
NFC Forum Type 1-5:The NFC Forum's tag types correspond to different chip implementations. NXP's NTAG213/215/216 chips ship in the greatest volume in this category and are commonly attached to products for authentication and traceability.
By form, the following are common:
- Standard PVC card (credit card size)
- Label sticker (smash, to paste)
- Anti-metal labels (with a magnetosphere)
- Alien card (key button, wristband, watch form)
- NFC (card simulation)
By storage capacity: NTAG 213, approximately 144 bytes, NTAG 215, approximately 504 bytes, NTAG 216, about 888 bytes, which is sufficient to store a section of the web site, text or small JSON data.
What difference does it make between NFC cards and RFID, Bluetooth?
These three are often confused, but they are at different levels:
NFC vs RFID:NFC is essentially a HFFRID, working at 13.56 MHz, within a distance of 10 cm. The RFID family also includes low frequency (125 kHz, animal earmarks), hyperfrequency (860-960 MHz, logistics storage, reading distance up to 10 m) and various frequency bands, with very different characteristics.
NFC vs Bluetooth:Bluetooth works at 2.4 GHz, a distance of about 10 metres, and is highly effective. NFC is almost zero pairs, so it can connect with one touch. Bluetooth is for file transfer, headphone link, NFC for identification and small data exchange.
NFC vs contact IC card:Contact IC cards require slots, NFC cards are not. They share ISO 14443 protocols, but they have different physical interfaces.
What are the actual applications of the NFC card?
The NFC card has infiltrated many corners of everyday life:
- Transportation payments:Transit and metro cards in most major Chinese cities use NFC-compatible formats, including Beijing Yikatong, the Shanghai Public Transportation Card, and Lingnan Pass. Tapping a phone to pay a transit fare also uses card emulation.
- Inter-door ban:The use of NFC cards in writing buildings, block closures and company work cards is much more secure than the traditional ID card (125 kHz).
- Product Anti-Perceptive Atrocities:Luxury goods, medicines and agricultural products are labelled as NFC, so consumers can check production information with a mobile phone.
- Mobile payments:Apple Pay, Huai's wallet and Mi's wallet are all bank card messages written on the NFC chip, and POS machines are paid as soon as they are paid.
- Device pairing:Bluetooth speakers and smart home devices can be quickly paired with NFC, saving the process of entering a password.
- Interactive marketing:Posters or displays are embedded in NFC labels, and they jump into public names or trade details pages.
What parameters should NFC be taken into account when selecting cards?
If the project is being selected, it is recommended that these points be confirmed:
- Compatibility of the agreement:Is the card reader 14443 or 15693? The card must match.
- Read distance:Do you need more than 5 cm? Is it attached to the metal surface?
- Storage capacity:Do you want to save only URLs (tens of bytes) or do you want to store certificates, encrypted data (a few KBs)?
- Security:Do you need to encrypt or explicitly rewriting? The Crystal 1 algorithm for MIFARE Classic has been decrypted, and a high-security scenario suggests MIFARE DESFIRE or NTAG424 DNA.
- Source of chips:NXP, ST, and RVM are mainstream manufacturers, with attention to retreading films and fakes.
In doing the enterprise-level NFC project, we generally recommend that clients start with sample card testing and run through the reading distance, interference resistance, data writing speeds and down the order of lots to avoid instability in the availability of chips or problems with the compatibility of readers.
Let's wrap this up.
NFC cards are based on a non-contact smart card for RFID, which works within 10 cm of the HF13.56 MHz, and is wired to work without batteries. It has various protocol standards such as ISO 14443, ISO 15693, Felica, corresponding to public transport, door restrictions, security, payment, etc.
The choice of type is based on the recognition of card reader protocols and reading distance requirements, then on a storage capacity and safety level, and finally on the availability stability of chip manufacturers.

Ms. Lei
Mr. Pang