nfc Label Door Ban Application: People Channels and Permission Management
RFID Knowledge

nfc Label Door Ban Application: People Channels and Permission Management

PublishedShanghai Zejie Smart Technology Co., Ltd.

The power model is not clear. It's all filled in.

The most problematic aspect of the NFC door is not hardware, but a power model. We see many projects that run through the first version of the system, and we find out: an additional department has to change the rules once, and separated employees can sometimes brush open. The root causes are that the design of the authority is not abstracted into "role plus time plus area" three-tiered structures.

Shanghai is a quick way to divide people into several broad categories, such as regular workers, casual workers, visitors, foreign agents, each category of staff, and the corresponding group of default privileges. Then break down the traffic area into several logical doors, each door being independently configured for the role and time period allowed to pass. When you hang out with the other person, re-routing the permissions can be synchronized to all the relevant gates.

Time control also takes into account the hours worked, shifts, and temporary overtime. A simple set of three fixed slots is enough, so we give a schedule of rules at a specific hour level, which is sent down from the backstage to the reader, where the reader is checked locally, even if the network is shaking.

Three Details of Reader Placement

Reader placement directly affects usability. At one warehouse, workers approaching with forklifts had oily hands. The tap area became coated with oil and read success dropped below 70%. Moving the reader from the wall to a post kept the read zone away from the contact surface and restored reliable reads.

Several specific parameters can be consulted:

If you share a wall, the center of the reader will be at least 1.2 metres away. Otherwise, a card may be read on both sides simultaneously and lead to error.

Card selection: the physical card is considered separately from the NFC

The NFC key card is a common type of IC card: the MIFIARE Classic series, which supports the virtual card that the NFC model is designed to be. The former is cost-effective, stable, and a blank card is a little bit more than a penny, and it's a very large-scale factory. The NFC card has the advantage of not bringing a physical card, and employees can open the door with their cell phone close, but it needs to be configured backstage, and the staff member's mobile phone type and system version will affect compatibility.

We usually use a two-track system in factory projects: real cards for employees, NFC cards for management and frequent incoming and outgoing suppliers. Both cards share the same back-office access system, which harmonizes data with only identifying media.

If only NFC is considered in the project, you have to pre-describe the type of machine supported in the procurement contract and prepare a backup. For example, some employees use old Anzul machines that do not support NFC, which require re-discharges with an entity card.

Intersect with existing door-barrier systems

Many factories do not have a door-to-door ban, but there is an old IC card system that needs to be integrated into the NFC. The most stable approach is to use Wiegand, a data-communication format between a door-ban controller and a card reader, to access the old control, with the permission to pass on to the new backstage, where the old system only controls locks and log records. This way, two systems synchronize people's information through the middle table.

The specific steps are: First, to confirm the number of Wegen digits (26 places, 34 places, 66 places) on the old controller, and then to select a matching type of reader output. Backstage regularly synchronizes the list of people to the old system, with the new system's permission changes being pushed to the controller by an intermediate. We did a warehouse retrofit that took less than two weeks to replace all the readers.

If the budget is sufficient, the old controller can be replaced by a new device that supports both NFC and IC cards, which will be fully integrated into a system. But such a programme would be long and suitable for new construction or large-scale renovations.

We've stepped on these pits. Next time we'll avoid them.

The rights of the employees who left were not recovered in time.The process of separation in the earlier version was manual and often missed. Now it is connected to HR, with a change in staff status, and automatic synchronization of privileges.

Pipe II: Temporary visitor cards are not collected.Some of the visitor cards are not available after they have been sent out and there is a risk that they will be reused.

Pipe Three: Logs are unrecovered.The system has been running for six months to find people following in and out of the area.

Pre-implementation check sheet

These were over before the project started, and it saved us a lot of trouble:

The door-to-door system appears to be a hardware project, with the core being power and process. Hardware selection is not very different for long periods as long as parameters are right, stability is over. Designing the privileges model and people's processes well, and matching the appropriate readers and cards, it can be stable for two or three years without major changes.

We Shanghai-based Skill, Inc. have all NFC-proscribed deployments in factories, parks, and writing buildings, and each project is configured to fit the situation on the ground. If you're evaluating the program, you can fill out the check sheet above, and get it to the supplier.