How does the fixed assets radio frequency tag management system work? Label coding and binding rules.
Fixed assets are managed by a RFID, with the core being to tie "physical assets" and "electronic files" to an automatic identifiable carrier, avoiding a manual inventory of missing disks, and wrong discs. The tag code determines how much particles the system can recognize, and binds rules to determine whether the matching of the asset and the label is affordable for count and audit. Both things are not clear, then change systems, and change labels are all defunct.
Code: EPC or custom
The long life cycle of fixed assets (5-10 years) and the first consideration for coding is "Can future change systems read it out?" The current mainstream program is divided into two groups:
- EPC Class1 Gen2(ISO 18000-63)RFID industry common standard, with a tag with a TID (the only one worldwide) and an EPC code written by the user, double-check. Most of the UHF readers on the market are supported, and they have the widest use.
- Custom Private Agreements: Some legacy or industry-specific systems use proprietary codes tied to their own readers. It may work in the short term, but if readers are discontinued or the vendor exits five years later, the tags are likely to be orphaned.
Once the label is on the device, you do not want to tear it down again. Select the EPC common standard, even if you change the supplier in the future, and Zreader will read it again. When Shanghai is doing a project for the company, the coding layer is basically on the line of EPC Gen2, so that the client is not abducted by a private family at a later stage.
How to allocate the label memory: TID, EP, User
A compliance RFID label is typically divided into three storage areas, each of which is clearly assigned to its own purpose before it is used:
- TID(Tag ID): When the label is removed, it is solidified, the only one in the world.Unable to rewriteIt's used to make a false and unique face-down -- even if the EPC is wiped or damaged, the TED is still there.
- EPC sector: For the storage of asset codes, read and write. This is the fastest section to read on the count (usually 1 ms complete identification).
- User Region: Readable and written space (in hundreds to thousands of bytes) for the storage of extended information, such as purchase dates, use departments, duty-bearers.
A common error in the exercise is to put all information into the EPC. The EPC usually has 96–128 bits of length, and a long string of slugs slows down recognition speed and increases reading and writing errors. The general practice is that the EPC only places a core index like “assets number” and other information back to the database.
Rules of binding: one signature or one signature
The binding method directly determines the efficiency and consistency of the inventory, with both approaches having their own context:
One signature on one piece (one on one)
Each asset is labelled with a label, coded only, and corresponds to an asset file. It is appropriate for a unit price, and requires a separate tracer of equipment such as servers, medical instruments, precision molds. The inventory takes place with the end in hand, and it will pop up all the information on the asset directly, with the highest accuracy of the reconciliation.
One signature for category I (one pair more)
In the same series, a label is shared for assets of the same type, such as bundled cables, office chairs purchased in bulk. It is suitable for low unit prices, large quantities, and managed separately for less significant assets. The advantage is that labels are less used and bind to smaller tasks; the disadvantage is that they cannot be located on a particular item and can only be written off in batches if lost or damaged.
Criteria for judgement: For a single asset with an original value of more than $5,000 or with a need to trace it to the specific user, select one item and select one category that will save much of the work.
Timing: first build the file or first tag
The order is the opposite, and it's normal to keep the data in the back. The correct sequence is:
- (a) The asset files are built in the asset management system and the asset numbers generated by the system are obtained;
- Write this number to the EPC section with the RFID reader;
- (b) Placing the label on the corresponding object and scanning it once to confirm that reading and writing have been successful;
- Links the tag TID and asset numbering to the database in the system.
Step 4 is the easiest to be saved, and it turns out that EPC wrote but TID was not tied, and did not read the TID at the count, or any other file. We saw a real story: an factory that jumped off the TID at the beginning of the line, discovered that more than 200 tags and asset files were not matched in six months, and then only manually checked them out for two weeks.
Common pits.
Reading failure in metal environment
Server cabinets, metal casers are labeled directly, and the reader cannot read them as soon as he approaches. The solution is to put them on a metal-resistant label (a layer of suction material on the back of the label), or a tumble cotton with a metal surface mat of 3-5 mm. Shanghai is in the machine room, before the scenes like the production line, they will be tested at site level, so that the tags do not paste until they are unread.
Malformed Tab Paste Location
The rule is that the label is as close as possible to the device, where it can be held by hand and where there are no shades around 5 cm.
EPC Code Code Unharmonized
Some departments use only numbers, others use alphanumeric codes, and lengths vary. Inventory software can misinterpret them. Publish a companywide coding standard specifying length, permitted characters, and the meaning of each segment. For example, four digits for the year, six for the category, and six for the serial number. Every department should follow the same rules.
Label life and asset life mismatch
The normal RFID label has a life outside the house of 3-5 years, and after several years of posting to an outdoor device, the print is blurred, the chips are ageing, and the count is becoming less read. If it is outdoor or hot, high-humid scenes, you choose an industrial label (over IP67, protected) with a lifetime of more than 10 years.
Summary of judgement criteria
The tag coding and binding rules of the radio frequency label management system do not circumvent three judgements:
- Encoding SelectionCommon standards (EPC Gen2)- without the risk of a private format;
- TieAsset value and management precisionOne to one or more, not one size;
- When you land,We build the files and tag them.,TID and asset number must be linked to the library.
The three matters are identified before the system is online, and the back count, transfer, and end-of-life full process data will be cleared and less work done.

Ms. Lei
Mr. Pang