What are the functional modules of the corporate asset management software?
A complete set of corporate asset management software typically contains 8-12 core functional modules, which are covered from the acquisition inventory to end-of-life disposal. The key is to see if they do not represent a good way to work, and whether they can solve the three main problems of accounting for the discrepancies, the inefficiencies in the counts, the troubles with accounting for depreciation. Below is a module grouping that explains what each module does and how it falls down.
Point 1: Asset desk module — basic data must be solid
The billboard is the root of the system, there are no clean billboards and all the following modules are going to run away. This module does three main things:
- Asset card: one card per asset, recording basic information such as name, number, type, specification, supplier, date of purchase, original value, department of use, etc.
- Classification and Encoding• Set a set of coding rules for each category, by major categories, such as fixed assets, intangibles and low-value, vulnerable goods, down to facilitate retrieval and aggregation
- Attachments and PicturesProcurement contracts, invoices, photographs can be posted under the card, and directly removed during audit or inventory
It's suggested that the code rules be fixed as soon as we do the project. We see companies, pre-encoded in a mess, and later consolidated statements when we find out that "computer" and "computer" are actually the same type of asset, but we can only go back to lot change and waste time.
Element 2: Life cycle management module - from inventory to end-of-life line
This module links the asset to its state and records every step of operation:
- Library: Procurement and acceptance-based recording system, automatically generating asset number
- Access/allocation: user of the record, location and change of location
- Loaned/repatriated: time-limited cross-sectoral or inter-corporate borrowing
- Repair/maintenance• Cost per maintenance, cause of failure, time off
- End-of-life/disposal: Clean up the desk after leaving clearance and automatically transfer the residual value
Equipment-intensive sites such as factories, print shops, and hospitals particularly need this module. An injection molding machine may be in service for more than a decade, changing departments and undergoing repairs several times before disposal. Without linking those records, you cannot determine what it actually cost.
Element 3: A stocktaking management module - bar codes and RFID are matching
A manual inventory of a digit is inefficient and prone to errors.
- Barcode TabPrint on the asset when entering the library, sweep with a scrutinizing rifle and automatically return information
- RFID Tag: Fits to a lot count of valuable equipment, hundreds of assets are cleaned up at once without having to match them one by one
- Move a peer point: a walk with a mobile phone or PDA can be completed, data is synchronized in real time
- Discount of excess/losses: Autocomparison of the results of the inventory, with discrepancies directly generated to be processed
All who have done an inventory are aware that the reconciliation rate can be up to 95% from 80% of manual counts, and it's about reducing the leakage and the error.
Element 4: Depreciation and accounting module - Financial data to match
Depreciation of assets relates to the financial accounting, a module that typically includes:
- Various ways of depreciationLine, double-balance reduction, sum of years and number (different ways to apply different types of asset)
- Autocount:: Automatic monthly depreciation and production of vouchers, provided that the financial system is accessible
- Impairment.:: Impairment treatment when the value of assets is below book value
Finance and asset management often argue over depreciation data. Shanghai-based Quest Technology, Inc., usually recommends single point alignment of the asset and finance modules to avoid monthly manual data.
Element 5: Approval process and authority management module
Changes in assets involve money and accountability, and must be subject to a process that is contained:
- Custom Passage: Access, transfer, multiple approvals for end-of-life, e.g. 50,000 or more required signature by the Director General
- Roles and Data Permissions: Ordinary employees can only look at their own assets, and financial resources can look at the whole company so that managers can change basic data
- Mobile approval: Approving officers can also handle the process on their mobile phones when they are away from work
Element 6: Report analysis and early warning module
Data should be visible and useful when they come in:
- Common reportsTables: assets, department distribution, category summary, depreciation breakdown
- Visualize the viewerTotal assets, net value, usage rate, idle ratio
- Early warning function: maturation of warranty period, depreciation due, prolonged idle, automatic alarm for assets awaiting end-of-life
The idle assets are costs that businesses often ignore. A 100 million-dollar manufacturing company that collects over a year, and the unoccupied equipment may consume more than 5 million, and the early warning module is a proactive way of putting these assets on the table.
Element 7: How to compare this list when choosing a model
After reading the list of modules above, you're advised to follow these three steps:
- First, we'll list the two or three of the worst scenes in the company, like "the time-consuming count" or "depreciation and financial incompatibilities."
- Match the modules and pain points in the list to see which are necessary and which are more detailed.
- Ask the manufacturer to go through the process with his real data when he's doing a live presentation, not just looking at PPT.
The modules of the asset management software look very different, and the differences are in detail. They are also a stocktaking module, some with bar code support, others with direct access to RFID channels; some approval streams can customize to nodal level, and others only have fixed processes. Try it with their own problems, which is much more useful than looking at product brochures.

Ms. Lei
Mr. Pang