What about the plant's fixed asset inventory? Workshop scene inventory organization analysis.
The workshop fixed asset inventory, often stuck to two things: "Put paper and pen or top-sweeper/RFID" and "cut off the day drive or use a shift-off. The test is straightforward -- looking at the number of assets, value density and cut-off costs. First, group by asset type (production equipment, mobile tools, shared work clothes), then choose the tools and methods for matching each group, which are much better than one.
Comparison of cost inputs
Different approaches to inventory, the pre-input and hidden costs vary considerably.
Paper sheet plus manual count
Upfront costs are almost zero: you only need a few ledger books. But manual transcription typically has a 3%–8% error rate, particularly on workshop floors where equipment often looks alike. Each mistake requires rework, so the hidden labor cost is far above the cost of paper. A midsize plant with about 500 pieces of equipment often needs four to six people for two to three days to finish a full count, costing several thousand yuan at local labor rates.
Barcode plus PDA (handheld terminal)
Equipment includes an industrial PDA at around CNY 2,000–5,000 and a tag printer at around CNY 1,000–3,000. With consumables and inventory software, the initial investment is roughly CNY 20,000–80,000. Scans are recorded directly, keeping errors below 0.5% and rework costs low. This suits workshops with 200–2,000 assets.
RFID Electronic Label
Individual electronic labels cost $1-10, and the price of anti-metal tags for fixed assets is higher, with readers and antennae arrays, which typically input more than 200,000. But mass reading speeds are fast, high-value, mobile metal equipment and work packages can be used to scan areas in short time without going on production.
The cost of downtime is often overlooked. An hour of downtime on an automotive body welding line can cost CNY 30,000-50,000. A poorly scheduled one-day stocktake can cost as much as a year's investment in scanning equipment. Calculate time and cost savings together.
Accuracy versus efficiency
Manual Paper Undisc Point
The two seemingly identical CNC beds in the workshop are next to each other, with similar branding positions and an image-based selection of operators is common. Plus light, noise, high-level interference, it's normal for a pure manual disc error rate of over 5%.
Bar-code scanning disc
Each asset gets a unique barcode. Scanning it with a barcode scanner or PDA enters it into the system and immediately flags an incorrect read. In practice, the error rate can be kept below 0.3%. A trained operator can scan 80-150 asset records per hour, more than twice as fast as working from paper lists.
RFID Batch Read
Readers can read dozens to hundreds of labels in seconds, suitable for warehouse shelves and semi-open assembly areas.
Apply scene comparison
The logic of the selection of the inventory options varies from workshop size to management base:
- Small workshop (assets 100): Small number, concentration of products, paper sheet plus Excel, with emphasis on the regulation of asset numbers and location tags.
- Medium workshop (100-1,000 units)The bar code plus PDA is the most expensive combination of value for money, and Shanghai's alternative approach to service such customers is usually the recommended route.
- Large workshops (over 1,000): It is recommended that the subregional parallel inventory be carried out, that core high-value equipment be supported by RFID and that normal equipment remain bar coded.
- Multi-shop cross-plant• Need to harmonize coding rules and centralize databases to avoid the difficulties of consolidation caused by separate workshop numbers.
Inventory organizational processes
Tools are only tools, and organizational processes are the key to landing.
Before the count
The asset desk reconciliation is completed two weeks in advance, and new, end-of-life assets are cleared on the books. Set up an inventory team (financial plus asset manager plus workshop head plus audit) to clarify the division of labour: who is responsible for which lines, who is responsible for checking, who is responsible for recording. Put a notice of the stocking in the workshop in advance, let the operator cooperate with the device that is being blocked.
Accusations
It is recommended that the "Close Clip + Uninterrupted Clip" strategy be combined: The core production line is scheduled to stop at weekends or shifts; assistive equipment and assembly areas can be counted in unstoppable time-lapse. Each group of inventory operators is accompanied by a workshop staff (with familiar location for the equipment), and a recorder. Real time data are recorded, an abnormal immediately marked mark is detected, and no check will be made after all the checks have been completed.
After the count
Export the inventory data against the system desk account, generating a list of the excess/loss. The loss of assets is first identified as "lost" or "unupdated" and many are transferred or maintained without updating the billing. The surplus/assets (physically but not systematic) are tracked for purchase or homemade sources. Once the analysis of the reasons for the discrepancy is completed, then the accounts are updated in one way or another.
Common pedals.
The workshop took stock of the most problematic links:
- Just "we can see."Assets borrowed, under maintenance and temporarily redeployed are the most vulnerable to leakage and must be cleared prior to inventory.
- One size, no type.: Combination of production equipment and low-value, easy to consume, slows down and reduces accuracy.
- The cut-off arrangements are inadequate: Half of the production line is to be turned on, the inventory clerk is interrupted and data reliability is significantly reduced.
- A list flow to formThe next inventory is still a problem. The inventory should be the starting point, not the end point, of the asset management in the closed circle.
- Encoding ChaosThe different workshops have different codings and labels, which makes consolidation and reset difficult.
The core of the workshop fixed asset inventory is to align "accounts, things, bits." Tool selection depends on size and type of asset, organizational processes need to balance production continuity with differences. Discrepancies are closed. All three things are set, so an inventory does not become a formalism every year.

Ms. Lei
Mr. Pang