How does the VAMS work? Vehicle identification and movement management
The VMS is not finished with the recording of vehicle information into Excel. Its core is to connect "identify" and "scruise" lines — to take real-time position and status of each vehicle by means of license plate recognition, GPS positioning, etc., and then to use automatic data dispatches and dispatches. Useful, it depends on the validity of data and the inappropriateness of rules.
Let's get this straight: What does vehicle asset management really do?
When people first come to the system, they think it's "Vehicle Records Management" -- register the plates, models, annual check dates, and this static information. This is only half of the understanding. A complete VAMS system, which covers at least four levels: basic vehicle files, current operational status, real-time location trajectory, and dispatch instructions based on these data.
Taking a logistics company that's going to be a city distribution company, the vehicle file tells you it's a 4.2-metre van; operating status tells you it's not active now, empty or full, and how much oil there is; positioning track tells you where it's on the road and how long it's been parked; and dispatch instructions combine mission lists, vehicle condition, distance, and give "where to send" advice. The four floors are connected, with any layer missing, and the system's value is reduced.
How did you "identify" the vehicle?
Three mainstream identification methods need to be developed.
License Recognition (LPR)The most common is that the camera is installed at a gate or parking space in which the vehicle enters and leaves, and the OCR algorithm (i.e., the translation of text from the image into an identifiable character) automatically reads the number of the licence plate. The recognition accuracy rate is usually over 95 per cent when the light is good, with the right angle, mainly for fixed access.
RFID TagsThis is for closed site management. A non-active label on the vehicle, a reader in the station, and a "read" when the vehicle passes. The label itself does not require batteries, with a life of 5 to 10 years, but only identifies the vehicle, and can't tell you where it is.
GPS/BeiDou locationaddresses tracking while vehicles are on the move. An onboard terminal reports longitude and latitude at regular intervals, typically every 1–10 seconds, sending the data back to the platform over 4G or via an IoT SIM. This is a standard setup for vehicles operating over large areas, such as at mines or in urban distribution.
When you actually land, the entrance and exit are quickly identified by license plates, moving through GPS, and the closed site is using RFID to do a chassis check -- Shanghai-based Chetting Tech uses this combination in several projects, three-way recognition and cross-checking, which can effectively reduce errors resulting from a single method of failure.
How did dispatch management work?
Early vehicle movements are largely dependent on the presence of people — dispatchers watching micro-clans, walkie-talkies and Excel — to show manual orders. This method is difficult to sustain after a fleet of over thirty or forty vehicles, with leaks, re-assignments and slow-slows being common problems.
The systematic movement is essentially a process of disaggregating "solicited decision-making" into input variables, with priority rules to calculate.
Input variables typically include: the mission ' s point of pick-up and destination, the earliest and latest time window, the mass of the goods; the real-time position of the vehicle, current load, current idle state, oil or electricity; and the driver ' s status and qualifications (certain dangerous chemicals must be transported with a specific qualification).
The rule engine defines a single order of assignment - for example, the first-to-be-to-the-first-to-heavy driver, who is closest to the distance, the preferred load matching and the preferred driver with specific qualifications.
The actual landing is that a medium-sized logistics enterprise can generally compress the single time of the assignment from 5 to 10 minutes to 30 seconds, and vehicle traffic can be reduced by 10 to 20 percentage points, depending on the degree of disruption in the original movement.
From identification to dispatch, a complete working link.
Identification and dispatch are not separate modules but one workflow: site equipment captures data, sends it to the platform, and the platform updates vehicle status and location. The dispatch engine uses the latest data to generate assignments and sends instructions to the driver's app or onboard terminal. The driver sends back the status after completing the assignment.
This link is a certain requirement for real-time. GPS data are usually delayed in 2 to 5 seconds, from the driver's receipt to the vehicle's startup departure, and within 3 minutes. Any chain is stuck, and the movement of the back is not working. So when you select the system, the platform is more important than the number of faulty designs for an abnormal network environment.
It's a few pits on the ground.
The identification data is not verified and goes directly into the library.Rain and snow, strong reverse light, night scenes will notice a marked decrease in the recognition of cards and all movement plans will be affected if data are dirty without manual review or multiple equipment cross-checking.
dispatch overruled.The rules must allow for manual access and special circumstances permit dispatchers to be reassigned.
Driver experience is ignored.The APP is slow to open, the single-plugs are silent and the map cannot be loaded -- once the driver does not trust the system, the first reaction is to turn off the APP's phone back. A better backstage algorithm, with no co-operation at the front end, is useless.
The data is not accessible on the island.Vehicle data and financial results, fuel consumption management, insurance management were not linked and identification and movement control were performed only in a semi-stop system.
Most of these holes up there are "not looking serious, but they're not exposed until you get on the line." If you don't ask about the data validation mechanism, the rules are configured, the driver gives feedback, and you can easily step in. The real value of the system is not how much, but whether the three things that are "identify data, dispatch speed, field landing" are possible at the same time.

Ms. Lei
Mr. Pang