How do you operate the RFID asset system inventory? System connection operation
Industry News

How do you operate the RFID asset system inventory? System connection operation

PublishedShanghai Zejie Smart Technology Co., Ltd.

Many people think that the RFID asset count is a quick-checking of the tag with the handheld. The practical operation depends on a three-step "label identification -- data validation -- asset system update": reading the asset, then judging its status and finally writing back to the system before it can be traced back to the inventory record.

The core of the RFID asset inventory is not "sweeped" but "confirmed".

The RFID labels are transmitted by wireless means, the reader is collected, and the system is responsible for converting the number to the name of the asset, the responsible department, the location and current status. Only when a label is read, it can only indicate that the device has appeared in the area of identification, cannot directly prove that the asset belongs to it, is located and is in the right place and in the right state of use.

A complete inventory data usually contains at least the following fields: Asset number, Label number, Asset name, Batch count, Read time, Read device, Location of inventory, Responsible department, Inventory result and unusual type. Asset number should not be mixed with label number, which corresponds to the managing object, and Wireless Identification carrier.

Data Entry Role Common Validation Method
Asset number Determine an inventory object Matching with asset desk.
Label Number Wireless recognition completed Check for repetition, lapse or unbound
Organisation Determine whether assets are located in the designated area Combining area labels, door-stopping points or the reader position
Inventory Results Development of management conclusions Distinction between normality, absence, misplacement, repetition and pending review

Values such as number of times read in text, time window etc. are examples of implementation configurations, from the system configuration method used for this document, 2025; actual parameters should be calibrated on-site according to label material, space layout and equipment models.

We need to get the system and site ready before we count.

Before an inventory is started, the system should have a base account of available assets. The account must at least specify the asset number, name, specification, department, responsible person, place of registration, status of assets and label binding. No tags are bound, even if read, only enter the " unlabelled " list, which cannot be directly counted into the normal asset.

Four basic categories of data to be prepared

The location of the label is also checked on site. Metal surfaces, liquid containers and dense stacking areas may affect reading effects, and the position of the label should be determined by a test reading. If there are multiple readers, the system needs to record the device number and the area number, so that the same asset is not duplicated by multiple devices.

The system-connected operation can be carried out in five steps.

  1. Creates an inventory task.Selecting the inventory range in an asset system allows tasks to be generated by department, location, class of assets or custom list. The system should fix a task snapshot to avoid changes in desk accounts during the inventory process that make it impossible to compare results.
  2. Sending tasks and initializing equipment.The task number, the inventory area and the execution permissions are synchronized to a handheld terminal or fixed-type reading/writing device.
  3. Collects information on labels.Staff scan as they move through each zone. Fixed devices collect data during preset time windows. Consider filtering duplicate reads, for example by keeping only one valid record when the same tag is read three to five times in succession. This is an example setting and should be adjusted based on field tests.
  4. Real-time comparison of asset desk accounts.The system matches the read results with the task list, identifying normal assets, off-list assets, unread assets, non-displaced assets and duplicate labels.
  5. Review and submit the results.The results of the confirmation are returned to the asset desk account and the original reading records are maintained for subsequent retroactive purposes.

During the inventory, it is best for the system to separate "read to" from "check through." For example, an asset label is read, but the reading position is not consistent with the registration location, and the result should be marked as "unusual" rather than as a direct mark. This does not leave out the asset or hide the misdirection of the asset flow record.

The anomaly is the decision whether the count results are available

Unusual System judgement Process Action
The billboards are on the record, not read on site. To confirm missing Expand reading, check tags off and asset loan records
Read on the spot, there's no record of it. Unbound or added assets Verification of origin of assets and prohibition of direct entry into official desk accounts
Label read. Locations are not consistent. Location Abnormal Identification of transfers and re-recording of changes
The same label corresponds to multiple assets The conflict is tied. Freezing of unusual records and checking tags and asset numbers
Multiple labels of the same asset Repeat Tabs Keep valid labels and handle obsolete or mislabelled tags

The system connection should also consider breaking the web scene. Handheld terminals can save the read records locally, restore the network and upload them by task number. The upload requires a double check to avoid being written twice over the same batch of data because of the network reconnection. Fixed devices should keep the device number, collect time and original tag numbers, and allow for error reading.

When designing the RFID asset system, Shanghai-based Stygian Technology Ltd. can decipher the inventory mission, equipment acquisition, desk reconciliation and unusual review into separate links, then link it to a single asset number. This is not about adding additional steps, but about returning each count to a specific task, equipment, time and people.

Once the inventory is completed, it's to be traced.

Upon submission of the inventory results, the system should maintain at least three types of records: original reading records, manual review of records and table account changes. The original record indicates when the equipment is marked; review records indicate who confirmed the anomaly; desk account changes indicate where the asset is located and when the responsible person or condition changes.

Managers can view the number of completed items by a count batch, normal numbers, abnormal quantities and amounts to be processed, or filtered by department, region and asset class. If the system sets a statistical calibration, the formula should be fixed, for example, "The completion rate = the total number of assets counted completed = 100% of the total number of mission assets " . The results are to indicate the size and time of the count, and cannot be compared directly with different instalments.

When you actually land, you can select an area with a modest number of assets for the test disk, focus on tag reading distance, regional boundaries, repeat data filtering, offline cache and abnormal review process. Once the test is passed, it is easier to detect problems on site than if you were directly on full-scale. The key to the RFID asset inventory is to allow the identification device, the business system and manual confirmation that the same number and rule are used, which ultimately leads to a valid record of assets that can be reviewed.