How does the RFID asset management platform work? functionality and integration
Industry News

How does the RFID asset management platform work? functionality and integration

PublishedShanghai Zejie Smart Technology Co., Ltd.

Late last year, an electronic components distributor ran a year-end count of more than 3,000 boxes in its warehouse. Four staff spent five full days scanning them one at a time and still found more than 30 boxes that didn't match the records. The problem wasn't a lack of care. With paper records and manual entry, errors can occur at any stage from receiving to dispatch. An RFID asset management platform replaces those manual steps with automatic reads, making every asset traceable from arrival to disposal.

From a table to the pit: Why must you go to RFID?

The error in the inventory is usually due to three reasons: one is that there is no record of asset movements, the other is that it is difficult to find after position changes, and the third is that manual entry is too inefficient when the number is large. The RFID labels are placed on the assets ' surface, and the reader can read hundreds of labels in bulk within a few metres, without having to scan them individually.

A typical RFID system consists of three parts: electronic tags (small chips attached to the asset, inner antennas and storage units), readers (also called readers, responsible for launching and receiving radio frequency signals), antennas (determinating the scope and direction of reading). The three are working with "identify-collect-up."

Core modules of the platform set-up

The RFID asset management platform is usually divided into four levels to consider:

When doing such projects, Shanghai usually combs the existing asset management process with its clients, identifies the most vulnerable links, and decides on which assets the labels are placed, where the readers are deployed. This sequence avoids spreading hardware too widely at the outset.

Data acquisition and hardware integration

RFID tags come in two types: passive and active. Passive tags draw power from the reader's electromagnetic field. They are inexpensive and small, making them suitable for office equipment, tools, and files, and typically have a read range of 1 to 10 m. Active tags have their own batteries and can be read from tens of meters away, or even beyond 100 m. They cost more per unit and are suitable for long-range monitoring of large equipment, vehicles, and shipping containers.

The frequency selection is also well-defined. UHF, 860-960 MHz, has a long distance to read, and mass reading is the most common frequency segment of asset management. HF, 13.56 MHz, has a short distance to read, but is relatively better resistant to metal interference, often used for people's doors or small items.

When the reader is deployed, the antenna angle and position directly affect the reading rate. For example, a corridor between the shelf of a warehouse suggests that each channel should have a set of directed antennas at its top, so as to avoid misreading the labels of the adjacent route. The metal shelf reflects and shields the radio frequency signals, and if necessary, installs suction material on the back side of the label.

What functionality software systems are to achieve

A functional RFID asset management platform, covering at least the following functions:

This section of the report is financially correct, so field names, data formats are best aligned with the asset module in existing ERPs, otherwise the exported data will not be used by the financial side and will have to be manually modified.

and existing systems

The RFID asset management platform is rarely run on its own, and most enterprises already have ERPs, financial systems, or even OA. When the platform is set up, these systems need to be accessible in three common ways:

  1. Databases are directly linked: Synchronize the master asset data to the other side system through an intermediate table, suitable for a low volume of data and stable field scenario
  2. API Interface: Real-time data exchange with RSTful interfaces, such as simultaneous updates of financial accounts when assets are transferred
  3. Message middle: By arcade in message queues (e.g., Kafka, RabbitMQ) suitable for mass synchronization with high data volume and low real-time requirements

Interface fields are the most problematic step in defining. The different systems often have different naming and taking rules for "assets number" "place of deposit" "use status", so that a field comparison table is made when integrating them to avoid an mismatch between the data on the back side of the line. Shanghai-based Quitsei will be specializing in running full data validation before project delivery, confirming the total number of assets in both systems, and change records will be fully consistent before receiving or inspection passes.

A few details that can easily be ignored in landing.

First, label printing and pasting is regulated. It is recommended that a two-dimensional code and RFID code be printed in a special label printer at the same time, to be placed in an asset level, where it is not easily worn. When metal surfaces are pasted, anti-metallic tags are used, and normal labels are used to read distance on metals that shrink significantly.

Second, more antennas are not always better. Too many can interfere with one another and lower read accuracy. Two to four antennas per reader setup, with a coverage radius of 3 to 5 meters, generally works well.

Third, data security. The RFID label itself contains only one ID code and sensitive information is placed in the back-office database. Communication between a reader and a server suggests that TLS encryption be enabled to prevent data from being intercepted during transmission.

Fourth, training costs. A better platform, managers don't use it for nothing. It's much more useful to arrange a day or two of hands-on training and get first-line people to walk through the inventory process with their own hands than to issue an operations manual.

A set of landing steps.

The above-mentioned elements are grouped into actionable steps:

  1. Combine the range of assets: list the asset types, quantities and values to be managed, and determine priorities
  2. Field survey: knowledge of layout, distribution of metals, network conditions
  3. Selective Test: select 2 to 3 labels and readers for field testing, and record reading rates
  4. Platform development: development or procurement management platform based on business needs, identification of interfaces with systems such as ERP
  5. Pilot Run: piloting of a regional or class of assets, validation process
  6. Full outreach: Gradually expand to all assets after the pilot is done

The entire process usually takes two to six months, depending on the size of the business. The more varied the assets and the more systems to integrate, the longer it takes.

Back to the stocktake error at the start. With RFID in place, three warehouse staff could have walked the warehouse with handheld terminals for an hour and automatically generated records for more than 3,000 cartons, with far fewer errors and omissions. Building an RFID asset management platform is as much about the workflow as the technology. First clarify the asset management process, then apply RFID to the steps most prone to error. That is how to make the solution work in practice.