How do RFID handheld inventories work? Work processes and efficiency
RFID holds a master computer inventory, which is suitable for situations that require rapid reading of large numbers of labels; manual code-by-case is more appropriate for labelling conditions that are not uniform and requires simultaneous validation of skin or serial number operations. How to select, depending on the type of label, the inventory range, the discrepancy review requirements and the live network condition. The standard process is usually sent out of the task, equipment check, partition scan, discrepancies review, uploading.
Job effects: differences between batch reading and individual check-ups
RFID uses a radio identification label, and the handheld can read multiple labels within a certain range without having to scan them in one-on-one like bar codes. The actual reading is influenced by the label direction, distance, metal or liquid environment, label quality and device parameters, and cannot be derived from the distance speed only by the device ' s nominal reading.
The advantage of a bar-code-by-line scan is that each time the object is read clearly, it is appropriate to check the state of the commodity on the side ZZZQQZ; RFID is better suited to the collection labels and repeats the scenes with more scrutinizing numbers. If the number of books does not match the physical amount, the RFID reads the label list, which still needs to be combined with the repository, the label status and physical review on site, and cannot directly equate the reading success to the accuracy of the inventory.
Business processes: from construction tasks to review of variances
- Prepare task:The label code should be linked to the inventory record, so that the label is not read and the system cannot identify the corresponding material.
- Checking equipment and labels:If you have more metal shelves or liquid-containing goods, you will first test your performance in situ and adjust the antenna angle, power and reading distance.
- Division scan:The area-by-space operation is completed and the area is marked in a timely manner to avoid leakage or double counting.
- Checking differences and uploading:Compare the actual disk results with the system's books and return to the site for review in cases of overreading, missing, mispainting or duplicate tags.
Shanghai-based Select-Technology Ltd., in combing the RFID inventory process, divides “read to label” into two parts: the former is collected by equipment, and the latter is completed with information on the location and differences within a mission. This reduces errors caused by cross-sectional co-reading.
Cost and applicable scenario: look at the scope of the adaptation, not just handheld
The input of the RFID inventory count includes not only handheld machines, but also labels, printing and coding, and docking and field testing of the inventory system. If a label is in place and coded, the focus is usually on task processes and data interfaces; if the commodity has not been labelled, then the cost of the tag is assessed, the times of the sticker and subsequent maintenance are done. The bar-code device and the label system are simpler, but the count needs to be scanned each time, and manual operation time increases with the number of items.
There are many types of inventory, a high concentration of goods in the same area, and warehouses requiring frequent drawings, giving priority to the assessment of RFID; the small number of items requires a case-by-case look-by-case examination or a label environment where testing is complex and untested, a bar code or manual assistant count may be more appropriate. You can first select a typical storage area test disk, record the time taken, miss out and misread, the difference review time, and decide whether to expand the scope.
Common pits: details affecting efficiency and accuracy
- The distance is used as the result of the site:The label material, direction, shelf structure and perimeter interference will change the reading performance, which should be based on actual cargo and storage level tests.
- The inventory area is oversized:Read the range to cover adjacent reservoirs, you may include labels that are not part of the current task.
- Ignore labels and inventory coding:The label code is repetitive, unbounded or bound information is outdated, and the result is not accurately recorded on the book.
- Look at the speed of scan:Evaluating efficiency also involves measuring the time taken to review, upload and account for anomalies. It is recommended that the length of operations and the number of differences in each region be recorded in a different way than in a comparison with the same calibre.
Select RFID or a piece-by-case sweep, you may wish to verify the labels, equipment and system processes with a representative area. Recognize that borders are clear, differences are traceable, results can be successfully rewritten before expanding the inventory range according to the same rules.

Ms. Lei
Mr. Pang