What are the advantages of RFID labels for asset management?
The main advantages of RFID tags for asset management are contactless batch identification and long-lived data storage. Barcodes have to be aligned and scanned one at a time, while an RFID reader can read dozens to more than 100 tags at once in a few seconds. Stocktaking is typically 10 to 20 times faster. Tags can be rewritten more than 10,000 times and last 5 to 10 years, making them suitable for long-term tracking of equipment, tools, and containers. With fixed readers or handheld terminals, businesses can move from manual asset registers to digital records that trace asset location, status, and movement.
Batch recognition: Just move the count from "sweep-by-sweep" to "over."
This is the clearest benefit of RFID and often the first that companies experience. Barcodes must be lined up with the scanner and read one at a time. Counting 100 assets takes at least half an hour. A UHF RFID reader can read hundreds of tags in a single pass from 3–8 m, in under 10 seconds. In a comparison run by Shanghai Zejie Technology Co., Ltd. at an electronics factory, counting 800 jigs and fixtures in one workshop went from two people working together for two hours to one person making a 15-minute round with a handheld.
Another advantage of lot recognition is that it is read in non-visual distance. Bar code is blocked, light is insufficient, surfaces are worn out; RFID labels are read as long as they are not in a metal shield and not fully wrapped in liquids, boxes, folders, dense trays.
Durable and reusable: a label and "run" for five to ten years.
The RFID label used for asset management is typically a shell or PET seal, which is commonly IP67 to IP68, and is resistant to oil pollution, dust, -20°C to 80°C in the industrial environment. Ordinary dry tape tags are not working on metal surfaces, but special anti-metallic labels (back-cover suction material) work steadily on machine beds, emulations, steel shelf.
The labels usually have more than 100,000 emulsible wiping times, with data preservation periods exceeding 10 years. Assets need to be updated when they are maintained, borrowed, returned, simply rewritten by a reader, and no new labels need to be printed like bar codes. A digital control bed from the plant to decommissioning, the same label can record every maintenance and change of location in full.
Real time location and loss: turn "no known" into "just checking."
The simple RFID label only tells you "is there" and "where is it?" There are three common ways:
- House-ban reader(a) Installation of a workshop entrance, warehouse door openings to record one entry and exit time at the time of reading the label, suitable for access control and unauthorized alerts;
- Regional reader(a) Installation at each working place, above each liner, and the introduction of a label into the antenna coverage triggers an update of position, with accuracy in positioning usually at the room or post level;
- RTLS Real-time positioning system• Deployment of multiple base station positioning stations in the plant area, with active tagging, to achieve accuracy of 1 to 3 metres and for real-time tracking of valuable equipment and medical devices.
In our medical equipment management project, we often loan breathing machines between sections, monitors, low-resilient returns from manual registration, high non-conformity. Once RFID tags are added to the door-described writer, the weekly count difference is reduced from 8% to 1%, and lending time out triggers system alarms.
Selected experiences in selection and implementation: where to post, how often to use
There are many cases of RFID project crashes, and problems are often not in the reader but in label selection and paste.
- Frequency SelectionUHF (860-960 MHz) reads distance, speeds, suitable for warehouses and production lines; HF (13.56 MHz) resists metal and liquid interference, suits tool cabinets, medical devices, single-grade management. Mixed scenes suggest two separate systems.
- Metals and liquids: Use on-metal tags on metal surfaces and prioritize high-frequency or liquid-tolerant tags in environments with liquids. For more reliable performance, leave a 1–2 mm air gap between the tag and the metal.
- Paste LocationThe same device, where the labeling can be doubled in different locations. Metal surfaces are to avoid large area flats and as far as possible are to the outer edge of the shell; handheld terminals are to be read in a way that takes into account human mechanics.
- Code CodeThe tag EPC code (electronic product code, unique global identifier) suggests that it be matched to the asset code and bound at the time of entry, without re-modifying the EPC during the asset flow, or triggers a large number of items.
♪ and the existing system: making data really flow ♪
RFID hardware itself only addresses the "read to label" layer, which is expanded by a back-end system. There are two common docking paths:
- Connect to ERP: the label EPC corresponds to the asset number in the ERP, and the reader automatically updates the location and status field of the asset by pushing it through the middle to the ERP after reading the label;
- Intersect with MES or WMS: The assembly, semi-finished flow of the product on the production line can be replaced by a bar code scan with RFID to trigger process recording and material deductions.
The middle is a loop that is often ignored. Reader brands are numerous, protocols vary (commonly the EPC Class 1 Gen2, ISO 18000-63), and intermediates clean data, filter, and link to the business system. Select the medium ' s s scalability, docking costs, and the difficulty of doing it together, not just read writer quotes.
Taken together, the value of RFID labels in asset management is not a single point function, but rather a combination of "volume recognition + long-life + rewritten + non-vision" that puts previously separated, manual, error-prone management into a digitized mode that can be traced, statistically and searchable in real time. It is recommended to enter from a specific scene, such as tool-to-tool count, protection against loss of valuable equipment or workshop-worker flow, and then expands to the entire plant after running process, which will be more stable.

Ms. Lei
Mr. Pang