How do you operate the rfid inventory handheld, check the tasks and data analysis
RFID Knowledge

How do you operate the rfid inventory handheld, check the tasks and data analysis

PublishedShanghai Zejie Smart Technology Co., Ltd.

The RFID handles the CD-ROM, four steps at the core.

RFID counts how the handheld is operated. In short, it's "loading the task-site scan-data back-discrepare." The device itself has few keys, gets hands on, and really determines whether the task is configured or not, and if a check mechanism is in place after the return.

I. Hardware and mission readiness before inventory count

Before taking a stock, get the equipment and mission ready.

Hardware Self-inspection: After turning on the handheld, check three things: whether the battery has enough charge (at least 80% is recommended), whether the antenna is screwed on tightly, and whether the SIM or Wi-Fi connection is working. UHF RFID handhelds typically read at 3–8 m, but tag size and nearby metal can affect range considerably. Before beginning, test two or three tags at the warehouse entrance to verify that the range and power settings are appropriate. We make this the first item in the startup SOP when handing over a project.

Task & & & & & & & & & & & & & & & & & & & & & & & & & & & & & & & & & & & & & & & & & & & & & & & & & & & & & & & & & & & & & & & & & & & & & & & & & & & & & & & & & & & & & & & & & & & & & & & & & & & & & & & & & & & & & & & & & & & & & & & & & % name Qam @ % on the %s %s on and %s on the on the as %s on and %s on and %s on the on the and %s and %s and %s on and %ssssss: When creating an inventory job in the backstage, it is recommended that all three dimensions of the library, SKU, batch, be taken, not just one SKU. The task will be overloaded, and can easily be closed to the middle section; too small and frequently switched. A mission would cover between 800 and 1,500 items, and split by a vault or area would be more prudent.

II. Operational elements of on-site scanning

The scans appear to be simple, with a few details not noticed and more missing and repeating.

Scan Mode Selection: Handhelds typically have three modes of "relay reading" "one read" "trigger reading". Store shelf is set up, and the most efficient is to read continuously when labels are aligned; and when shelf spacing is small, adjacent vault labels are easy to read in a string, it is recommended that you use the trigger read instead, press each shelf and read after.

Speed of movement: When read in a continuous manner, it is more appropriate to keep people moving at 0.5 to 1 metre per second, too fast for handhelds to handle returns, and the missing is significantly higher. Many people actually go very quickly, with an 80% count rate, then have to double-drive later, and then slower.

Repeated Read Processes: The same tab is recorded many times after two or three seconds within a valid reading range. Once the "deweight" feature is activated in the task configuration, the system will be automatically merged before return. Local cache capacity is limited and it is best to upload a repository once after a library has been cleaned, avoiding loss of data piles.

III. Data returns and preliminary checks

The clean-up was not done directly after the report, but rather by retransmitting it and then making a preliminary check.

RevertHandhelds generally support the three types of feed: WiFi, 4G and USB. If there is a wire network in the warehouse, use WiFi as a priority, fast and free of traffic; and if you do not have a net, you can return 4G, but be aware that the weak signal storage is vulnerable to upload failure and need to see the " uploaded" tag on the handheld.

Initial check: Once the data is in the system, you can first make a round of "book number vs actual sweeps" comparisons. This step does not require full consistency, but it is much more efficient than reporting "discounted" directly.

IV. DISAPPEARANCE ANALYSIS AND DIRECTION processing

The initial check was simply to present the anomaly, and the real inventory value was in variance analysis.

Check for missing reasonsWhen the count rate is below 95%, it is recommended to look in three directions: label itself (defared, blocked), environmental factors (metal shelf, liquid shielding frequency signals), operational problems (too fast, antenna angles are not right). The different ways of remedying the problem -- labels need to be changed, environmental issues need to be adjusted and operational problems need training.

Compensatory Disk and Confirmation: For missing entries, make a double-reduced disk more reliable than allow the original inventory officer to sweep back. The fillet is marked as "Runset" in the system before it is used to avoid mixing with new data. After the patched data is uploaded, the system automatically merges into the original job and generates the final discrepancy report.

V. Several experiences in improving the accuracy of inventories

After conducting a multi-industry RFID inventory, we have drawn up several experiences that have been repeatedly validated:

In general, the RFID handheld CD-ROM is a tool that is guaranteed by standardized SOP and detailed back-checking. The process of task configuration, field scanning, data checking is fixed, and the count accuracy is usually stable at over 97 per cent -- which is also the conclusion that Shanghai-based Scrutinistic Technologies have repeatedly validated in multiple project delivery.