RFID Tool Management: Tracking Checkouts and Returns Online
RFID Knowledge

RFID Tool Management: Tracking Checkouts and Returns Online

PublishedShanghai Zejie Smart Technology Co., Ltd.

In fact, the core of RFID tools management is not "replace paper cards with electronic labels" but rather to use them, return them, take a count of these three actions in a system that can be traced, and then each tool has its place, go, and it is proven. The key thing to determine is whether the system actually landed, and it's three things: whether the label is read in a metal environment, whether the tag is used in a way that matches people and tools, whether the number and state are automatically verified when returned.

Why is it so messy to run a work kit?

Many factories appear to have systems in place for the management of their furniture, which are signed and returned for registration, but there are problems at the site with lost tools, wrong tools, and overstays. The problem is often not responsible, but rather interrupted processes themselves.

The natural defect of a paper registration is that it is after-effects -- the recipient does not necessarily read the tool number when signing, or the warehouse does not check it one by one when returning, and the consistency of the account is discovered through monthly count counts. When a wrench is found missing, it is difficult to pursue and retriev it for a month or two.

The value of RFID is to make every move a system record, not a manual memory. Each tool has its only electronic label, and each access library automatically generates records, who received it, when received it, when returned, and what was clearly in the system.

What exactly does "Closed Ring" mean?

The online closed loop for the return of the claim is from application to confirmation of restitution, which is run out in the system without a wired supplement and after-entry.

The first step is...AccessThe operator automatically reads the tool number through the RFID label on the device for the fixed identification device at handheld or in front of the storeroom, and identifies the recipient with a person's card or face, matching the work order and generating the application record.

Step two is...Return chain. The same scanned labels are used when returned, and the system compares to whether the tool is in service, the recipient is consistent or exceeds the loan term. All normal updates are automatically made in the library; damage is detected and the repair process is triggered.

Step three is...Data flow and reconciliation. The access and return record is written in real time into the back-office database, where the manager can see the location, status, history of each tool at any time. The over-recovered tool allows the system to send a reminder.

A complete closed ring is a three-step walk, and any less can lead to loopholes.

What do you do with hardware when you land? The metal environment is the core test.

Most of the equipment is metal material, which is the main technical challenge for RFID to land. The normal paper labels are placed on the metal surface and can fall from 3-5 metres to a few centimetres or not read at all. So the first thing that happens when you land is to choose the right label.

For metal tools, the choice is to use an anti-metal RFID label, which has a suction material inside it that isolates interference signals from the surface of the metal. Common are the screwdriver tags for the ABS shell, the strapped cable tags, the embedded wrench tags, and in different forms, just choose between the shape of the tool.

In terms of reading equipment, two types of scenes are used. The entrance to the storeroom is controlled by a fixed type reader, which can read many tools at the same time; and the handheld PDA is more flexible when taking an inventory and searching for it during field operations. Shanghai-based Quiz Technology Ltd. found that the working frequency of the library readers was appropriate for the UHF (860-960 MHz) view, with distance and disturbance resistance.

There is also a more easily ignored detail: how the labels are installed. Tools experience vibration, oil pollution, high temperature, and when they are glued, the labels are easy to break out. More reliable by hooking, laceration, screw fixing, etc., rather than spending more hours in advance, avoiding frequent post-fixing.

How does the software system fit? It's valuable to get through to existing MES/ERP.

RFID itself addresses only the problem of identification, and it really depends on software systems to move data. Common functional modules include basic data management, people privileges, access return process, inventory function, report analysis, etc.

Ideally, integrate the system with the plant's existing MES (manufacturing execution system) or ERP. For example, checkout can automatically verify that a production work order exists, and checking an item back in can generate a maintenance order if a repair is needed. Shanghai Zejie typically maps existing processes before deciding whether to build from scratch or integrate with an existing platform, avoiding duplicate work.

For data interfaces, the selection of RFID intermediate (the software layer that converts the original reader's data into business data) is critical. A stable middle can handle multiple readers and send them together, resist label collisions (which are correctly distinguished when multiple labels are read), and filter invalid reading signals. These technical problems are poorly addressed, and caldon will be used to improve the front end.

A few pits that can easily be stepped on -- details determine whether the system is going to run.

The RFID equipment management does not sound complicated, but some of the actual pits landed are recurrent.

The first pit is a label that does not match the description of the reading and writing distance.The plant is named 5 metres, which may be only 1-2 metres on a metal-intensive tool rack.

The second pit is incomplete process retrofitting.Some factories are on the RFID system, but old habits are not changed, so they take the walk-through system, return it or register it manually.

The third pit is the data that nobody looks at.Even with a system full of checkout and return data, missing tools will stay missing if no one analyzes it. Set automatic rules, such as notifying someone when a tool is three days overdue or flagging a tool that has not been checked out in three months for possible disposal.

How impact is measured - several quantifiable indicators

The real functioning of RFID equipment management can be judged by several quantitative indicators:

Behind these numbers is a shift in the management logic: to conduct back-to-back accountability into process control and from experience management to data management.

Summary

The real value of RFID tools management is not just that it uses some high-tech technology, but whether it can take the lead back, and take a count of these three actions in a complete closed loop. The focus of landing is on: anti-metallic labels, library readers deployment, interface of software systems to existing platforms, and overhauling of field processes. Any chain drops back into the system. Can the system run, three-point technology, seven-point processor and live implementation.