Designing an RFID Warehouse System: Architecture, Equipment, and Acceptance Testing
The key to the design of the RFID warehouse logistics system is not stacking, but composing "goods move, information syncs automatically" in a solid manner. The system is four layers: sensory layer (label + reader + antenna), network layer (median + gateway), application layer (WMS module), interface (interfacing with ERP/MES). Equipment configuration is set in terms of size of the warehouse, shelf density, and commodity class, without one set of parameters that are valid for all the world.
Element 1: first determine the structure and coverage, then select the equipment
Many projects start with a rush to buy readers and labels at competitive prices, and then they find the signal dead end, with only 80% reading out, which in turn adds antennas, power modulations, re-painting networks, and more expensive. We usually do two things first in the project:
- (a) Draw a plan of the warehouse, indicating the physical location of the shelf, the corridor, the entrance and exit, the sorting area;
- Whether to confirm the core actions to be managed — whether to check in, take stock, out and review the entire process — or to trace them? Different moves, different hardware locations.
A specific example: a warehouse for the wholesale of shoes, with emphasis on error control and door-to-door review of the exit corridor, RFID will only have to read at the port of delivery, which is two key nodes on the review counter, without having to be covered in full; and a factory for electronics, which needs to be applied to one item of a process, that reads the reader will be deployed to the production site, the test area, the entrance to the library, the vault position. Determine where "rereads" and reading the particle extent", then reverses the number of readers, the skyline towards the label selection.
Element 2: Hardware Selection - Readers, antennas, labels
These are the three components of the RFID system that affect most read-through effects and total costs. First, frequency: UHF (UHF, working at 860-960 MHz) is the main repository logistics scene, with work distances of 3-10 metres, which can penetrate paper, plastics, wooden trays, suitable for mass reading; HF (HF, 13.56 MHz) is short, suitable for single-product proximity recognition. The usual scenario has the majority of UHF.
- Reader:Fixed general 4 or 8 channels, single stations with a range of $3000-15000, are responsible for wide-scale reading and pass recognition; handheld 5,000-20000s, used for inventory counting, searching for goods, spot checks; industrial-grade integrated machine readers are usually integrated into antennas and support PoE (electricity with the utensils network), suitable for deployment at the port of delivery.
- Antenna:The Circumpolar antenna is wide-ranging, suitable for shelf areas and irregularly placed goods; it reads far, penetrating well, suitable for fixed channels or transports. Each reader is typically equipped with 2-4 sub-astrodes, looking at the width of the channel and the depth of the space.
- Label:Paper-free glue 0.3–1 yuan/mem, suitable for outer boxes; ABS metal resistant label 1-5 yuan/made, suitable for metal trays, cabinets; clothing plaque 0.2–0.5 yuan/mule, which washes up and withstands high temperatures. Depending on whether the material contains metal liquids, there is a need to read and write repeatedly to choose.
Point 3: The label is well-placed, don't mislabel it.
The best equipment, the mislabelled label position is also white. The most common error is to place the UHF tag in the middle of the metal surface, leading to a read distance falling directly from 5 m to 0.5 m. The correct approach is:
- (b) Metals are given preference for metal-resistant labels with a layer of isolation or for the tumbled cotton, which is 3-5 mm thick, between the label and the surface of the metal;
- (b) The labels of liquid bottled products (cosmetics, alcohol) with foam buffers to the extent possible;
- The outer box labels are suggested to be placed at a side distance of 5 cm from the top, in the direction of the main channel and avoid being covered with transparent tape and oil;
- Tray labels are suggested to be attached to the side and allow for quick scan by forklift or door reader.
In practice, the link and initial printing are synchronized and it is recommended that the sticker SOP (Standard Operating Process) be left behind and that new staff do as they wish.
Element 4: How to unplug down the functionality modules of the software system
The system function is not complex, but it needs to be solid and contain at least these:
- Basic data management:Goods files, repository coding, vendor/client file, label code rules (common EPC 96 bits, SGPIN code).
- Treasury management:• Automatically cross-check the purchase order with the upboard guidance (recommended by store) and complete the inventory.
- Out-of-house management:The sale/transfer order generates a swipe-scave, swipe-swap, review-through, read-in, autocheck, wiping out the library.
- Inventory management:Handheld scanned place by location Auto-generated a surplus/loss statement of the margin and balance review process.
- Inventory queries and statements:Real-time inventory, stock age analysis, flow of water to and from the warehouse, operational logs.
The key is that every action triggers an automatic physical-system check and presses the manual entry link.
Element 5: How to connect to ERP / WMS
The core function of the RFID intermediate (part of WMS or stand-alone module) is to filter, weight, and link the raw label data that are read to, and generate structured events.
- Direct writing:The RFID system is a submodule of WMS, which directly reads and writes the same database, develops small amounts and is suitable for projects starting from scratch.
- Intermediate interface:The interface with existing ERP/WMS is made by RESTTful API (a program-to-process interactive data protocol based on HTTP) or message queues (an intermediate channel for sequential data transmission), suitable for large enterprises that already have an ERP.
Interface fields typically include: EPC code, business document number, operating type, operation time, operator, coding code. Once the field is set, the two sides IT are connected and run for a period of 1-2 weeks.
Point 6: Several key parameters for field deployment
The signal strength and reading rate are two hard indicators of the project's acceptance. We usually look at these numbers when we adjust:
- Read distance:Handhelds are labeled on containers with a 3 to 5-metre steady reading; portal-door readers with 4 to 8 metres.
- Read rate:For stationary goods with all tags facing the same way, the requirement is ≥99%. For goods moving through a portal at 10 m/s, the requirement is ≥95%.
- And read:The single channel is stable to read 50-100 labels per second under a mass overload.
- Anti-interference:The metal shelf environment needs to be field tested and it is recommended that the metal poles be fitted with shield reflectors to avoid multi-routing interference (irradiation signals are offset by reflections on multiple paths).
The "ideal value" provided by the supplier is not to be trusted until the environment is measured.
Point 7: Step in, step out.
Shanghai-based Scratch Technologies come down from a number of storage RFID projects and find a common pattern: the phased landing is much more efficient than one-time spread. The recommended pace of advancement is:
- Phase I (2-4 weeks):(a) Select a small high-value scenario pilot, such as a port of receipt or a single warehouse area, running through the "poster-entry-deposit-take" process;
- Phase II (1-2 months):Extension to several storage areas to verify mass readability stability;
- Phase III (2-3 months):(a) Full-silo coverage, full interface with ERP/WMS and training of operators;
- Phase IV:Continuous optimization to address long-tail problems (reading of special goods, label printing efficiency, stock count enhancement, etc.).
Each stage is defined as a "success criterion" -- for example, 99% of the pilot period readings are going to go to the next stage, or we can solve the problem of unreadability.
Last paragraph
RFID warehouse logistics management is not just a stack of equipment, but rather a real bite together between perception, data, and the three layers of business. It takes an extra week to do architecture and site mapping, much less than a month to go back to work at the implementation stage. If you are assessing the feasibility of this system, you suggest that you go from one of the most painful links (such as high error rates in the database review, delayed inventory data) to pilot it, and then verify it with real data, ROI, and decide whether to expand your input.

Ms. Lei
Mr. Pang