How is the spare parts warehouse managed?
When equipment is shut down, the maintenance staff arrives in the spare parts warehouse and it takes half an hour to find a suitable item because of lack of model and location identification on the shelf.
Start with "No found": first divide the storage area by material characteristics
The trouble that is common in the storeroom is to mix high frequency, heavy weight, precision and consumables: to flip a box when needed, and to bump into it when moving. Planning starts with the size, weight, storage conditions, frequency and equipment attribution, and then partitions, not just by the shelf space.
The storage area may be classified as a receiving-and-checking area, a qualifying storage area, a special safekeeping area, a material distribution area and a discharge or disposal area. HF spare parts are placed near the drop point, where they can be easily removed; heavy pieces are placed on lower floors, and the shelf carrying capacity is confirmed; precision items, which are vulnerable to tideware are dustproof, and tidal measures are required for their custody. Fire escape routes, exit and removal corridors should remain open, with specific width and facility requirements approved in accordance with applicable field specifications.
Shanghai-based Cheeky Way Technologies, while combing the spare parts management, will first match "material properties - conditions of storage - access frequency" to discuss shelf and storage. This would avoid only space utilization, but would increase the pick-up distance and safety risks.
The cargo is starting to get confused: using code and tagging for position.
Once the shelf is installed, if it is only in person's memory, people can still find faulty when they are on shift or temporarily replaced. The only-place code can be set by "Case area - shelf - layer" and then put to the shelf for example, B-03-02-04; material labels record the names, specifications, models, units of measure and equipment that apply.
The same place contains as much material as possible, which is clearly distinguishable. Parts that look similar but have different specifications are to be separated and the model varies; small pieces can be separated from boxes to avoid mixes. For a safe period, batch or first-in-first-out requirement material, record batch and date of entry, and be performed according to the appropriate rules when the material is delivered.
Irregularity: turning the collection start into a fixed process
When entering the library, check the name, specification, quantity and appearance of the purchase or transfer document and the physical object; material that needs to be inspected should be placed in the inspection area, confirming its conformity and then on board. The place and quantity should be registered after the shelf, avoiding " something is in the library but not recorded in the system " . The labels are found missing, the quantities do not match or the packaging is broken down, and records should be kept for processing.
When you take the application, check the material model, use and quantity against the information requested, and deduct inventory in a timely manner after release; return items distinguish between unused, reusable and unobserved, and cannot be directly mixed back to the eligible goods position. The account tool can also be updated simultaneously from the form or inventory system, with emphasis on designating the responsible person, harmonizing fields and allowing time, quantity and hand-recording of each access library.
The inventory is always in a temporary raid: review according to risk arrangements
The time frame for the collection is often difficult to trace. The frequency of receipt and the impact of the shortfall can be determined by material importance: common use, increased frequency of review of critical spare parts, scheduled spot-checking of low-frequency materials; equipment overhauls, centralized access or repositioning of storage, and timely verification of the inventory. The specific period should be determined in conjunction with stock size and on-site management capacity, so it is not appropriate to carry fixed figures.
When discrepancies are detected in the inventory, the undesired receipt and dispatch of the relevant cargo position is suspended, then the immediate entry into the warehouse is verified, access, discharge and transfer records are checked, the reason is confirmed, the accounts are adjusted and the tags or process loopholes are filled. The manager can keep track of the reconciliation of accounts, and the emergency cases are searched for time-consuming and inactive stock changes, using these results to determine whether the area planning needs to be adjusted.
From one search to control.
The spare parts warehouse management is not finished by placing the shelf in order. First, it is clear the storage area and then harmonizes the coding of cargo and material, then connects the inventory, access, refund, transfer to the inventory records, so that the storeroom can be easily located, properly captured, and accounted for. You can first select a device area to try, record common errors and problems, and then revise the rules according to actual usage.

Ms. Lei
Mr. Pang