High temperature-resilient label RFID Selection Guide: From material to performance, read a book about choice of product
In high temperature scenarios such as industrial, automobile electronics, aerospace, and so forth, the common RFID label is prone to data loss, and the tag drops, and the choice of heat-resistant labels is key to ensuring asset back-to-back efficiency. The selection needs to focus on two core dimensions: material and performance, avoiding a single error zone that "only looks at temperature-resisting values."
The material selection is the basis for high temperature tolerance labels. There are three main types of primary base: PI (polymamine) has a much more resistant range - 40 °C ~ 260 °C, which is flexible and suitable for paste paste, such as car parts; ceramic foundation can be up to 1200 °C, hard, anti-corrosive, syllable metal, casting, etc.; glass matrix is about 500 °C, sealed, often used for medical high temperature treatment. The adhesive also needs to match temperature, silico-based glue is e.g., and is not easily unfouled in high temperatures.
Performance parameters are to be matched with actual scene needs. The temperature tolerance range is to "remain a surplus" if the long-term temperature of the engine module is 80 °C ~ 150 °C, and the labels above 200 °C should be selected to avoid instant high temperature damage; storage capacity is chosen according to data requirements, only by a retroactive asset number of 1K ~4K bytes, and recording production parameters is required for more than 16 K; reading distance is to combine use environment, workshop flow lines are mostly read at close range (1 metre), suitable tags for handheld equipment, and storage shelf back-to-back support is needed for ZUHF (UHF) labels that are read remotely over 3 metres.
In addition, environmental compatibility needs to be considered, such as the chemical site needing to select a label that is resistant to chemical erosion, and the wet environment need to focus on water-resistant levels. Through a double screening of "Meths Match Temperature + Performance Fits the scenes" it is possible to choose an appropriate, stable high temperature resistance RFID label, which avoids the cost waste of repeated changes.

Ms. Lei
Mr. Pang