The application of soft electronic labels in logistics traceability: How to address the pain point of a packaging curved landscape?
In logistics traceability, curved scenes such as box folding and soft packaging squeeze often lead to the loss of traditional rigid labels and circuit break-ups, while flexible electronic labels become central solutions through the targeted design of materials, structures and technologies.
Material compatibility is the basis for dealing with bends. For repeated bends in logistics packaging, labeling base materials prioritize polyester (PET) or polyamide (PI): PET material costs are controlled and can be subject to a 180° double folding without breaking; fit for express delivery boxes, bag-loading goods etc.; PI material is more resilient, even if the packaging changes slightly in form due to freezing rigidity ( -40 °C) in cold chain logistics, the label remains structurally intact. The adhesive formulation uses high-strength pressure-sensitive glues that bind up to 5 N/25 mm or more, which can be closely bound to different materials like vashing paper, plastic film, etc., to avoid falling off the labels at curved times.
The structure designs further strengthen the ability to resist bending. The label circuit layer uses a "soft-wire" process, which produces conductive ink into waveform or grid-like lines, replacing traditional straight-line circuits - when packaging bends, wave-shaped lines can be reduced by form-to-convey, reduce the risk of break-up of the circuit, tested for over 5,000 times 180 degrees bend and less than 3% of the passivity decline. Also, some labels add flexible buffers (e.g. ultra- thin silicon) between the circuit and the base, further absorb the impact of the curve, adapt to the frequent squeeze in fast-scrubing, stacking scenes.
Technology optimizes the stability of trace data. For disruptions that may occur from curve, labels use UHF (UHF, 860-960MHz) frequency bands and are accompanied by jamming design: on the one hand, the UF frequency band supports 1-10 m remote reading, even if the label is moved by the packaging bend, it can be captured by scanning equipment; on the other hand, the tag internal signal booster chip can automatically regulate the signal strength when the curve leads to a change in antenna angles, ensuring real-time uploading of back-to-back data from the entire logistics chain (storage, transport, sorted), resolving the pain point of traditional labels “writeless”, and achieving a full-scale retroactivity of goods from the vault to the sign-off.

Ms. Lei
Mr. Pang