Soft electronic label production: How can print electronic technologies enhance label flexibility and durability?
RFID Knowledge

Soft electronic label production: How can print electronic technologies enhance label flexibility and durability?

PublishedShanghai Zejie Smart Technology Co., Ltd.

In areas such as logistics tracking, smart packaging, wearable equipment, soft electronic labels can fit irregular surfaces, adapt to the complex use of scenes, and gradually replace traditional rigid labels. At the heart of this change is the re-engineering of labelling processes by print electronics -- which break through the light of the traditional electronics manufacturing dependence, and corrodes hard processes, with "print" at its core, to achieve...dwelling in circuits and functional layers on flexible base materials, both giving preference to labels and enhancing durability through the coordinated design of materials and processes.

From substrate selection to printing functional layers, printed electronics make it possible to produce flexible tags throughout the manufacturing process. Conventional rigid tags generally use PCBs, whereas printed electronics use materials such as polyimide (PI), polyester (PET), or ultra-thin flexible glass. These substrates can be less than 25 μm thick, can be bent to a radius as small as 5 times their thickness, and remain structurally intact after repeated bending. This is what gives the tags their flexibility.

Functional printing is a key link in increasing flexibility and durability. Unlike the "facility" wiring (disruptional base softness), printed electronics use “plus-facilistic” printing, which produces conductive ink (e.g. silver nanolines, graphite-based ink) to form circuits directly on flexible base materials through dim printing, soft-forming or ink-jet printing. For example, in the case of cont printing, it transfers the conductor oil ink... to the base surface, with a wide electrical route within 10 micrometres, and with oil ink bound together with the base material, even if the labels experience more than 1,000 bends, the channeling capacity declines less than 5%. At the same time, some processes are also printed on the surface of the circuit, using friction-resistant materials for polyurethane or epoxy resins that allow labels to withstand temperature fluctuations - 40°C to 85°C, and daily frictions, erosion in wet environments, which significantly enhance dilatoryity.

Moreover, the “roll-to-roll” production model of printed electronics further optimizes the flexibility and consistency of labels. Under this model, flexible base materials are continuously printed in a roll form, dry, solid processes, etc., can be produced at a rate of more than 10 metres per minute, and during continuous processing, the combination of ink and base materials is more evenly balanced, avoiding possible local stress concentration in batch production - which makes the label more balanced when it bends, less prone to break-ups or fallout, and further enhances the stability of softity and durability.

Today, with the help of print electronics, flexible electronic labels have been able to stabilize signals on the wrinkled surface of a delivery package, work normally in low-temperature cold storage environments for food packaging, and even fit human skin for health monitoring. This dual advantage of “soft plus durability” is driving the upgrading of electronic labels from “identifying tools” to “multifunctional smart carriers.”