Low-cost flexible electronic labelling curriculum: material selection and process step elaboration
Keeping flexible electronic tags affordable means choosing materials and processes carefully so basic performance is retained without driving up the cost. This approach suits small or midsize prototype runs and DIY projects. Materials: Cost-Effective Options Substrate: Start with PET film 50–100 µm thick, at about RMB 0.50 per A4 sheet. It combines flexibility and heat resistance for most nonextreme conditions. Kraft paper or PVC film can cost less, but kraft paper is not waterproof and is suitable only for dry environments. Conductive material: Substitute water-based conductive ink containing carbon nanotubes or graphene for expensive metal pastes. A 500 mL container costs about RMB 80 and can print 500–1,000 tags. For hand production, conductive silver paint costs about RMB 15 per bottle and suits small runs. Other supplies: Use clear tape to secure the circuit, scissors, and a standard inkjet printer to print a circuit template. No specialist equipment is needed. Process: A Simple Workflow Prepare the substrate: Cut the PET film to size, for example 5 × 3 cm, and wipe it with alcohol to remove oil so the conductive material adheres firmly. Design the circuit pattern: Draw a simple circuit, including the antenna and chip pads, in software such as CorelDRAW. Save it as an image and print it on the substrate with a standard printer as a template. Print the conductive layer: Follow the template and use a brush or squeegee to apply a uniform 50–100 µm layer of conductive ink. Avoid pooling, which may cause shorts. Cure: Air-dry for two hours or speed up drying with a hair dryer on low (≤60°C). The conductive layer should be fully cured and not tacky to the touch. Attach the chip: Align the leads of a UHF or HF chip, which costs about RMB 1–3 apiece, with the circuit pads. Secure it with conductive adhesive and let it set for one hour. This approach keeps costs below RMB 5 per tag without specialist equipment, suiting price-sensitive applications such as e-commerce packaging and small-scale logistics. A desktop screen printer costing on the order of RMB 1,000 can replace manual printing to speed production and bring the cost below RMB 2 per tag at scale.

Ms. Lei
Mr. Pang