Industrial RFID carrier standards and protocols: selected and system interface under ISO
The standardization of industrial-grade RFID carriers is central to ensuring intersystem compatibility and data interoperability, where the series of norms developed by ISO (International Organization for Standardization) provides a key basis for selection and system interfaces and forms the basis for smooth flow of data in intelligent manufacturing.
ISO standards cover important technical parameters for RFID data carriers. For air interfaces, the ISO 18000 series is particularly important. ISO 18000-6C covers UHF and supports long-range reads and writes and simultaneous identification of multiple tags, making it common in warehouse logistics and automotive production lines. ISO 18000-3 covers HF and is used for accurate short-range identification in electronics manufacturing. For data formats, ISO 15963 defines unique identification rules for electronic tags to ensure IDs are globally unique. ISO 15962 defines the syntax and encoding for reading and writing data so devices interpret it consistently. For environmental performance, ISO 16750 sets industrial requirements for vehicle-mounted RFID equipment, including vibration and high-temperature resistance. ISO 9001 governs production processes from a quality management perspective.
When using ISO standard selection, you need to combine the application scene matching criteria. Autowelding workshops are required to select an ISO 18000-6C UHF anti-metallic label that meets long range recognition and high temperature environmental needs; electronic components are traced back to ISO 18000-3 standard HF tags that are more appropriate for identifying micro-components. At the same time, check if the label is certified through pre-rigging ISO 17712 to ensure data security.
The system interface follows the ISO communication protocol. At hardware level, RFID readers are required to support ISO 15693 protocols in order to communicate with high frequency carriers; on the software interface, using ISO 24753, a seamless connection between the reader and PLC, MES systems can be achieved. Data interactions follow the code rules defined by ISO/IEC 19762 - 5 and avoid data-format conflicts between different systems. For example, when MFIS at auto plants reads the data via an interface that meets ISO standards, it is possible to share the data directly with ERP systems without additional data conversion.

Ms. Lei
Mr. Pang