How does the RFID inventory program work? Identification of selection and operational design
The core of the RFID inventory is not to buy equipment first, but to define the inventory object, route, distance and data rules. The scene suitable for RFID usually has three conditions: a label that can be fixed, mass readable, and relatively manageable in the area; when metal, liquid density or labels are severe, field testing should be used before setting up.
Rewind one: first, clear the inventory target and boundary.
The result is not ideal, and the common reason is not that the reading/writing power is inadequate, but that the inventory target is not defined in its entirety. It needs to be confirmed first whether the inventory is a single item of material, a swing box, a tray or all assets in the storage area, and clearly what problems are being solved by the count: check numbers, check locations, check status, or trace access to the library records.
- Account objects:Determines whether the label is bound to material, packaging or asset-based and avoids re-labelling of the same object.
- Inventory range:The warehouses, workshops, shelves, temporary storage areas and areas of separation are to be demarcated and the areas not included in this operation identified.
- Data results:At least keep the label number, material code, batch, repository position, time of count, location of the reader and state of inventory.
- Operating frequency:The equipment input, label durability and data validation differ from day to week or month to month.
For example, if the target is just to confirm the amount of the warehouse, a fixed-reader can be used to match the route identification; if you want to identify which liner a box is located, you need to encode the storage and design a partition inventory or handheld review process. The more specific the target, the easier it is to control the cost.
Redisposal II: Identification of the selection is to be pushed from the field material.
The RFID label's identification distance, direction and stability is influenced by metal, liquid, dense stacking, packaging materials and installation positions. It cannot be purchased only on a " long distance" or "high sensitivity" basis, but should be tested with real material in the label sample.
| Conditions on the ground | Selected Focus | Suggested means of verification |
|---|---|---|
| Paper boxes, plastics boxes, wooden trays | Size, sticker and mass reading capability of generic labels | Test static and mobile readings on actual stacking quantities |
| Metal shelf, metal container | Separating structures and installed space for metal-resistant labels | Test the sides, suspension and edge position separately |
| Liquid or high water content material | Distance between labels and materials, direction of antenna | Test in full load, no empty packaging to replace |
| High temperature, damp, oil-contaminated environment | Float, glue, sealing and resistance | Simulate cleaning, handling and storage cycles before reading |
In the engineering design, UHF may use a working distance of approximately 3-10 metres as an initial test range, depending on labels, antennas, power, environmental and local frequency band requirements. This area is part of the program validation proposal, which is derived from RFID project engineering design experience, 2024-2025, and should not be directly considered as the result of on-site acceptance.
The label code also sets rules in advance. It is recommended to use the only tag number generated by the system, and then to relate to the material code, batches and asset properties; do not write too much business information directly into the label. This way, when changing the material properties, you simply change the database and not re-create the label.
Reverse III: Readers and antennas should be configured by operation
The device configuration should be built around "How People Walk, How Goods Pass, Where Data Generates." Fixed-style readers are suitable for access, door-barbing and transmission lines, hand-held readers are suitable for shelf-by-place count, desktop devices are suitable for initialisation and sampling of labels. Three types of equipment can be used in combination, without all tasks being performed by one device.
Fixed Identification
The fixed-form scheme addresses both error and omission. The channel side sets a directional antenna, using a shield structure, ground-based marker or trigger sensor to limit the area of reading. It is recommended that vehicles or persons be defined as an inventory event and that they record the start time, end time and event number. The number of antennas should not be estimated on the basis of the area covered only, but in combination with the height of the goods, the width of the route and the label should be tested point by point.
Handheld Count
Handheld devices are more suitable for shelves, storage spaces and discrete assets. The interface should show the current area, the number of pallets, the number read and the unusual number; the operator will switch to the next area after completing a warehouse slot. Project tests can keep the time of reading over a single repository at about 5-15 seconds and avoid impact on the person's time spent by "no repetition of tabs" (the value is an operational design reference, based on project test recommendations, 2024-2025.
Mixed Configuration
When goods are transported through the receiving and sending channels, they are recorded with fixed equipment, and regional review is done with handheld devices during monthly or quarterly inventory counts, which makes it easier to balance automatic collection with unusual processing. Shanghai-based Cheeky Way Technologies Ltd. uses tag tests, field motion lines and data fields in the same round of validations, avoiding the selection of equipment but not having a match to business records.
Rediscretion IV: The job design is to write "how the drive" into a step
A set of land-capable inventory processes should include at least five actions for preparation, collection, matching, review and archiving, but each action must have a clear input and output and cannot simply read " an inventory with a handheld " .
- Inventory readiness:Freezing or marking access to the vaults in the inventory area, downloading the list of the current inventory ranges and locations, and checking the electrical capacity, network and label status of the equipment.
- Regional collection:Operators move in the order of their library position, read labels and record areas, time, equipment numbers and personnel numbers.
- System Match:Matches read-in labels with the book listing, and produces results in four categories: accounts that match, books that are not, accounts that are not and duplicates the labels.
- Unusual review:Reread the missing labels to change location, direction or distance; if still unrecognized, confirm using bar code or a manual number.
- Results archive:Maintain original reading records, adjusting records, reviewing personnel and processing time to avoid retaining only modified stock quantities.
If the transaction cannot be completely stopped during the inventory, the time stamp and operational status of each record should be added to the count, so that "changes in pre-take inventory" are calculated separately from " post-check adjustments" for "clip changes" before "exposure inventory". This allows for back-reading, unregistered movements or access to the library during the inventory.
Redisposal V: Receiving and inspection indicators are divided into identification and business levels.
The acceptance and inspection are at least in the identification and operational levels: the identification level is to see if the collection can be stabilized, and the operational level is to see whether the results of the collection can be correctly accessed into inventory, assets or traceability systems.
| Receiving and inspection items | Suggested indicators | Method of determination |
|---|---|---|
| Label Readability | The test target can be set at no less than 98%. | Repeated tests by real material, real stacking and prescribed path |
| Error Control | Non-target area labels should not enter the official count results | Border testing in adjacent repository locations against labels |
| Repeat Count | The same label produces only one valid result in a single mission | Repeat the readout and check the system to reset the rules. |
| Data Sync | Offline records can be used to re-route and abnormal records can be searched. | Test break-nets, restore networks and duplicate submissions |
The above indicators are project acceptance recommendations, not industry-specific; values are derived from engineering test design proposals, 2024-2025. For a high-density metal environment, the direction of liquid material or labels is irregular, baseline should be established and targets set based on a business-permissible rate of error, and it is not appropriate to use a single value directly.
Redisposal VI: Leave the anomaly in the program
The actual inventory must contain damaged labels, delabelling, multiple signatures of the same object, external material and reading of adjacent area tags.
- Label damage: Replace with a re-post label, retain old tag numbering, replace reason and operator.
- Repeat label: Suspend the number adjustment of the object and check the binding relationship before processing.
- External items: Separate lists to be confirmed are generated and not directly incorporated into official inventory.
- Missing object: Change the reading angle and position recheck, using a manual number to bottom if it is still unsuccessful.
- Regional Threading: Reduce reading, or adjust antenna orientation or add regional triggers.
Before rollout, pilot in one shelving area or along one lane. Include at least three material formats, two stacking arrangements, and one exception review. Once the pilot passes, replicate the setup elsewhere to reduce rework from a full rollout at once.
Conclusion: On-site validation before equipment and budget are determined
The RFID inventory program should be developed in a sequence of "Definite Object and Results - Test Label - Design Identification Paths - Configure Devices - Develop Workflows - Set Acceptance and Inspection Indicators." For metals, liquids, dense stacking and multi-area parallel count scenarios, field testing is more valuable than parameter tables. It is recommended that a material and area test table be formed, and then label type, number of readers, antenna position and system interfaces be determined.

Ms. Lei
Mr. Pang