What are the advantages of RFID labels for asset management?
Industry News

What are the advantages of RFID labels for asset management?

PublishedShanghai Zejie Smart Technology Co., Ltd.

The main advantages of RFID tags for asset management are contactless batch identification and long-lived data storage. Barcodes have to be aligned and scanned one at a time, while an RFID reader can read dozens to more than 100 tags at once in a few seconds. Stocktaking is typically 10 to 20 times faster. Tags can be rewritten more than 10,000 times and last 5 to 10 years, making them suitable for long-term tracking of equipment, tools, and containers. With fixed readers or handheld terminals, businesses can move from manual asset registers to digital records that trace asset location, status, and movement.

Batch recognition: Just move the count from "sweep-by-sweep" to "over."

This is the clearest benefit of RFID and often the first that companies experience. Barcodes must be lined up with the scanner and read one at a time. Counting 100 assets takes at least half an hour. A UHF RFID reader can read hundreds of tags in a single pass from 3–8 m, in under 10 seconds. In a comparison run by Shanghai Zejie Technology Co., Ltd. at an electronics factory, counting 800 jigs and fixtures in one workshop went from two people working together for two hours to one person making a 15-minute round with a handheld.

Another advantage of lot recognition is that it is read in non-visual distance. Bar code is blocked, light is insufficient, surfaces are worn out; RFID labels are read as long as they are not in a metal shield and not fully wrapped in liquids, boxes, folders, dense trays.

Durable and reusable: a label and "run" for five to ten years.

The RFID label used for asset management is typically a shell or PET seal, which is commonly IP67 to IP68, and is resistant to oil pollution, dust, -20°C to 80°C in the industrial environment. Ordinary dry tape tags are not working on metal surfaces, but special anti-metallic labels (back-cover suction material) work steadily on machine beds, emulations, steel shelf.

The labels usually have more than 100,000 emulsible wiping times, with data preservation periods exceeding 10 years. Assets need to be updated when they are maintained, borrowed, returned, simply rewritten by a reader, and no new labels need to be printed like bar codes. A digital control bed from the plant to decommissioning, the same label can record every maintenance and change of location in full.

Real time location and loss: turn "no known" into "just checking."

The simple RFID label only tells you "is there" and "where is it?" There are three common ways:

In our medical equipment management project, we often loan breathing machines between sections, monitors, low-resilient returns from manual registration, high non-conformity. Once RFID tags are added to the door-described writer, the weekly count difference is reduced from 8% to 1%, and lending time out triggers system alarms.

Selected experiences in selection and implementation: where to post, how often to use

There are many cases of RFID project crashes, and problems are often not in the reader but in label selection and paste.

♪ and the existing system: making data really flow ♪

RFID hardware itself only addresses the "read to label" layer, which is expanded by a back-end system. There are two common docking paths:

The middle is a loop that is often ignored. Reader brands are numerous, protocols vary (commonly the EPC Class 1 Gen2, ISO 18000-63), and intermediates clean data, filter, and link to the business system. Select the medium ' s s scalability, docking costs, and the difficulty of doing it together, not just read writer quotes.

Taken together, the value of RFID labels in asset management is not a single point function, but rather a combination of "volume recognition + long-life + rewritten + non-vision" that puts previously separated, manual, error-prone management into a digitized mode that can be traced, statistically and searchable in real time. It is recommended to enter from a specific scene, such as tool-to-tool count, protection against loss of valuable equipment or workshop-worker flow, and then expands to the entire plant after running process, which will be more stable.