UWB Beacon UNC14

Model: L-LAPBE01-UNC14

UWB Beacon UNC14 product picture
The UNC14 is a battery-powered UWB beacon for indoor positioning. It can be mounted without network or power cabling at each beacon location.

Product Overview

The L-LAPBE01-UNC14 is a fixed UWB beacon for indoor positioning. It runs on battery power and mounts with 3M adhesive or screws. Use it to add positioning coverage in factories, industrial campuses, power plants, and visitor sites without routing power and network cabling to every mounting point.

The UNC14 works with UWB badges, LoRaWAN gateways, and a positioning platform, providing a fixed ranging reference for mobile tags. Its stated ranging distance is up to 100 m, with a ranging error of up to 30 cm. Stationary positioning can achieve better results under suitable deployment and algorithm conditions.

Deployment

Mount each beacon at a known location with limited obstructions and a low risk of impact. Accuracy and battery life depend on anchor density, site layout, tag count, update rate, and the RF environment.

Specifications

Product ModelL-LAPBE01-UNC14
Dimensions153×91×55mm
Installation3M glue paste or screw fix
Protection levelIP66
Range≤100m
Distance Precision≤30cm
Distance algorithmTOF
UWB frequency band6.2~6.739GHz
Battery capacity38Ah
Working voltage3.6V
Typical re-entry.3 years (8 hours per day, 13 labels continuous positioning conditions)
Operating Temperature-30℃~70℃

Product Features

  • Battery power, free-wire and power wiring for rapid retrofitting and site deployment
  • Support for 3M glue paste or screw fixation, fit for various installation conditions such as wall surfaces, poles, etc.
  • UWB TOF ranging, not more than 30 cm
  • A single-point range of not more than 100 m suitable for indoor space partition coverage
  • 38Ah Large capacity batteries, typical working years of up to 3 years
  • IP66 Protective Design, Working Temperature Range - 30°C ~ 70°C

Applications

WarningFilled

Site location coverage

Challenge:The existing plant has no access to the routing, multiple location points and a tight construction cycle
Solution:Quick installation of UNC14 beacons on the wall or pole, and a no-wire positioning network with locator plates and platforms
WarningFilled

Forklift and vehicle area positioning

Challenge:Large vehicle range, frequent change of route and high adjustment cost for fixed cable equipment
Solution:Placing of a battery beacon by route and area of operation to provide stable range reference for vehicle-mounted or personnel tags
WarningFilled

Campus and power plant safety area

Challenge:Target areas need to be located to improve their blinding, but electricity and network conditions are limited
Solution:Batteries for telecommunication mark supplement UWB coverage, cross-border and detention alerts in conjunction with electronic fences

Product advantages

Trophy
Battery power

Wire-free deployment

No separate wires and power supply for each beacon location are required to shorten the construction cycle.

Trophy
≤30cm

High precision ranging

UWB TOF range is suitable for the finely detailed management of indoor personnel and vehicle locations.

Trophy
3 years

Long-term maintenance

38Ah Batteries can be operated for many years under typical working conditions.

Trophy
IP66

Industrial environment adaptation

The wide temperature and protective design facilitates installation in a variety of environments, including plants, parks and so on.