GPS smart logistics lock ZJZNS02 195*114*37mm
Model: ZJZNS02-2
GPS smart logistics lock ZJZNS02 195*114*37mm
Product Overview
ZJZNS02 is a 4G smart electronic lock, with 10400ms of batteries, gravity sensors (also known as accelerator sensors) and RFID readers, and monitors the location of containers or assets. Through wireless technology, users can access GPS locks remotely through text passwords or application (android Android Anjole or IOS Apple). Without a cellular network, users can also open locks via an authorized RFID white card.
Product Functions
Hardware
• 4G cellular network: no additional description
GPS+LBS positioning: GNSS positioning; GPS+BeiDou+GLONASS, multiple positioning system (MPO) guaranteed... real time positioning
• Double SIM card (optional): default single card, with two Micro SIM versions to support double SIM stand-by mode
• Enriched 10400 mAH to charge 18650 lithium batteries: acceptable customisation, ... 13,000 mAh
• Internalized 3-axis accelerator sensors: motion or vibration detection
◆ Beeping and indicator light alert: different devices in state beepers and signal alarms
Solid
◆ Real-time location query: query current position via SMS/TCP command
• Password unlocking: the device is unlocked by password (TCP/SMS)
• Locking equipment through authorized RFID white card: using authorized RFID white card locking equipment
◆ Automatic lock: When the lock rope is inserted, the device will automatically lock
50 authorized RFID keys: use authorized RFID white card locking devices
• Polygonal geographic fence: support for 10 polygonal geo-fences
• 5 authorized telephone numbers: receiving text messages or responding to orders and sending orders
• Support for 9 alarms: locking, painting of unauthorized RFID keys, unlocking, password error, vibration, entering of the geographical fence, exit from the geographic fence, low battery power, bottom opening, electrical failure
• Locking and unlocking reports: locking or unlocking, unlocking through a password or RFID white card, reporting time, locking/locking succeeded or failed
• FOTA: Upgrade solids through OTA
Specifications
◆ Size: 195mm x 114mm x 37mm
• Weight: 833g (including mainframe and 35CM lockline)
• Materials: engineering plastics
• GPS module: AT6558R
• GSM module: Quactel 4G CAT1 series
• Working temperature: 20°C - +80°C
• Storage temperature: -40°C - +80°C
• Humidity: 5%-99%
• Internal battery capacity: chargeable batteries 10400 mAh
• Average working current: <70 MA
• Average on-call current: <100uA
• Working hours: 2G equipment (10400m Ah) normal working pattern: 150 hours; 4G equipment (10400m Ah) normal working pattern: 120 hours
• Water-proofing level: IP67
• Transfer mode: Support TCP (GRPS) or SMS (short message)
• Charge specifications: DC5V, 2A, 5521 interface
• Motion sensors: 3D accelerator gravity sensors
• Memory: 4MB
Antenna: GSM/GPS Default Internal antenna
◆ Locked: stainless steel, 200KG against pull
LED: 4th circuit (communications, positioning, low power, charge)
• SIM: Double card stand-alone, medium card
• Communications module - Module: 4G LTE Cat1 Industrial IOT module
◆ Communications modules - frequency segments: -CN: LTE FDD (Band 1, 3, 5, 8), LTE TDD (Band 34, 38, 39, 40, 41), WCDMA (Band 1, 5, 8), GSM/EDGE (Band 3, 8 optional); EU: LTE FDD (Band 1, 3, 5, 7, 8, 20, 28), LTE TDD (Band 38, 40, 41), WCDMA (Band 1, 5, 8), GSM (Band 3, 8); - AU: LTE FDD (Band 1, 2, 3, 4, 5, 7, 8, 28, 66), LTE TDD (Band40), WCDMA (Band 1, 2, 4, 5, 8), GSM/EDGE (Band 2, 3, 5, 8)
• Positioning module - formula: GPS+BeiDou+GLONASS
• Positioning module -- Chip: AT6558R
• Positioning module -- reception channel: 32
◆ Positioning module cold start: ≤32 s.
◆ Positioning module hot start: ≤1 s
• Positioning module - Cold Start Capture Sensitivity: 148dBm
• Positioning module - Tracking sensitivity: 165 dBm
• Positioning module - Precision: <2.5 m (CEP50)
IV Standard packing and optional annexes
• Stamp: ZJZNS02 Host (with 35cm locks), Charge Line, RFID white card (2), Packaging Box
• Selection: Charger adaptor (DC5V-2A output), screwdriver
V Product Appearance Description
Positive
◆ Locked rope: standard size 35 cm
◆ RFID key recognition area: Slide RFID white card
Bottom View
◆ Beeping: Different equipment states, beeper alarms
• Charger interface: 5V DC-2A chargers
Side View
• Red LED GSM: Network connectivity
• Green LED GPS: GPS positioning status
• Low electricity capacity of yellow lamps: low power status
• Red light charge: charge or charge full state
Back view and backcap open (back view)
• Buffering cotton mats: prevent damage to equipment in case of collision
• Marker: equipment brand name, IMEI etc.
• Strong magnet: protection against equipment vibrations and collisions
Backcover open
◆ SIM1 card slot: Push SIM card fixator down vertically to open it, and then put Micro-SIM card 1 in it, press down and push SIM card up vertically to set SIM card
◆ SIM2 card slot: vertically push the SIM card fixer down to open it, then put Micro SIM card 2 inside, press down and push SIM card up vertically
• Power switch: right-turn switch to connect to the device; left-turn switch to shut down the equipment power
◆ Micro USB plugin: connects the Micro USB configuration cable to PC, initializes parameters or debugs purposes and upgrades solidware
Luminous sensor: used to detect whether the back covers are open
VI First use
SIM card installation
~ Open SIM1 or SIM2 SIM card slots
• Insert the Micro SIM card into the slot, and direct it to the circuit board (PCB) with the chip
• Note: Slide the SIM card fixer to lock it in
• Ensure SIM card texting/beecom service is available
◆ Make sure the phone card PIN lock is properly closed
LED indicator light description
◆ Red GSM LED: Flashes very quickly (3 times per second) when registered on the cellular network and sending data to the server. Flashes once every 3 seconds when registered but unable to activate data service; check the device settings and confirm that data service is enabled for the SIM card.
• Green LED GPS: - Scratch every 10 seconds: GPS position is valid; - Scratch every 3 seconds: GPS signal is invalid; - Off: equipment in sleep mode or off
• Low electricity: blinking every 3 seconds when the internal battery is below 20%
◆ Red light recharge: charge or full; when charged, the red light is always on and when filled with electricity, it becomes green
Initialise Configuration Using Parameter Tool
• Configure the following commands using SMS or serial port configuration tools
◆ Query factory default parameters: - Command: *SPJLX*P:753869*C: #; - Description: Query parameters; - Terminal response: <SIM:2;IMEI:868703050814516;CREG:1;CSQ:30;IP:,URL:58.61.154.247,7018;APN:cmnet,,;ID:3050814516;ACC:0;LOC:0;R:30;WK:3;SLP:720;LOCK:2;VER:TL10__00_2022-08-18_16:37:35_V1.0>; - Response fields: SIM (SIM card 2 currently in use), IMEI (device IMEI), CREG (network registration status), CSQ (signal strength), IP/URL (server address and port), APN (access point parameters), ID (device ID), ACC (accelerometer status), LOC (positioning status), R (reporting interval while locked), WK (operating time), SLP (sleep time), LOCK (lock cylinder status), VER (software version).
◆ Configure terminal server parameters: - Command content: *SPJLX*P:753869*U: dxapi.trac4you.net, 7018,1,#; Description: *SPJLX*P:753869*U: IP address/domain name, port number, type of connection (1tcp, 0dp),#; * Terminal response: < *U: dxapi.trac4you.net, 7018,1>; * Response description: *U:IP address/domain name, port number, type of connection (1tcp, 0dp)
◆ Configure SIM card APN parameters: - Command content: *SPJLX*P:753869*A:cmnet,#; - Description: *SPJLX*P:753869*A:APN name, APN username, APN password#; - Terminal response: < *A:cmnet,>; - Response description: < *A:APN name, APN username, APN password>
◆ Configure the motion/static reporting interval: - Command content: *SPJLX*P:753869*E:1,30,60#; - Description: *SPJLX*P:753869*E1: The time between reporting when locked and reporting when unlocked#; - Terminal response: < *E: 1,30,60>; Response description: E1: The time between reporting when locked and between reporting when unlocked;
Product work logic
• Usually, if there is no external wake-up source, the device will be asleep and awakened at RTC awakening intervals (default value 30 minutes)
◆ When the slide RFID white card, detection of vibration, backcap opening, lock rope insertion and pull out, RTC awakening, these wake-up sources will awaken the device; the device works for about 10 minutes, reporting position data by location at intervals (default 30 seconds)
Lock and clear the lock.
◆ Locking device: Inserting both ends of the rope into the device, ZJZNS02 automatically locking; beeping one time (detected to be plugged in) Zooming electrics running Zooming beeping twice (locking successful)
◆ Unlocking device (cipher unlock): Send commands by text or Web platform; lock rope is advisable after the breaker continues for 3 seconds; if 10 seconds does not remove the cord, the beeper rings 60 seconds, and the extraction line stops during 60 seconds, then the device locks automatically
◆ Unlocking with an authorized blank RFID card: The package includes 2 authorized blank cards. With the device powered on, swipe an authorized card to unlock it. The buzzer sounds once (card read), the motor runs, and the buzzer sounds twice (the locking cable can be pulled out). If an unauthorized card is swiped, the buzzer sounds for 3 seconds, the cable remains locked, and the device issues an alarm.
Additional Specifications
| 4G honeycomb network | No additional description |
|---|---|
| GPS+LBS Positioning | GPS positioning; GPS+BeiDou+GLONASS, multi-positioning systems to ensure accurate real time positioning |
| Double SIM card (optional) | Default single card, with two Micro SIM versions to support double SIM stand-by mode |
| Inline 10400 mAH to charge 18650 lithium batteries | Accepts customisation up to 13,000 mAh |
| Inline 3-axis accelerator sensor | Motion or vibration detection |
VII live presentation


Ms. Lei
Mr. Pang